CARTA CIRCULAR #M1501004 2 de febrero de 2015 A TODOS LOS SUPLIDORES DE IMPLANTES DE TRIPLE-S SALUD Aplicación de Facturación de Implantes y dispositivos médicos En Triple-Salud, Inc. estamos constantemente velando por mejorar y facilitar nuestros procesos. Nuestro compromiso es ofrecer a nuestros proveedores herramientas que les sean de utilidad en el proceso de facturación y cobro por los servicios que prestan a nuestros asegurados. Ya tenemos disponible una herramienta para facilitar la facturación correcta de los servicios ofrecidos. La aplicación en internet es conocida como Aplicación para la Facturación de Implantes y Dispositivos Médicos (AFIDM). Esta herramienta permitirá la evaluación de los servicios prestados y estimará el pago correcto por ellos, antes de que se someta la reclamación. Pueden acceder a la herramienta en la siguiente dirección: https://orthotechpr.com/home/homepage. Esta le proveerá:
Rápida respuesta para la notificación de errores. Tarifa a facturar. Aumento en el recibo de reclamaciones limpias al sistema, que redundará en un
pago efectivo. Proceso ágil de reconciliación.
Se incluye una guía con imágenes de pantallas que le servirá de apoyo para utilizar la aplicación. A continuación le recordamos los requisitos por línea de negocio:
Triple-S Salud, Inc. requiere que se sometan los siguientes documentos junto con su facturación para asegurados de la línea de negocio comercial:
o Carta de Asignación de Beneficios o Invoice
o Reporte Operatorio Programa de Salud de Gobierno requiere para asegurados de esta línea de
negocio los siguientes documentos: o Carta de elegibilidad del asegurado (activo/cancelado) o Invoice o Reporte operatorio o Preautorización en los casos que así corresponda
Este cambio de proceso será el primer paso para que usted se beneficie de la facturación electrónica limpia, que le permitirá cobrar por sus servicios en 18 días y evitar sobrepagos. Esperamos que esta herramienta le sea de utilidad y nos reiteramos a sus órdenes. Para información adicional, puede comunicarse al (787) 749-4700 con nuestro Departamento de Gerencia de Servicios. Cordialmente, Gloria M. Lebrón Vicepresidenta División Participantes y Proveedores Anejo
CIRCULAR LETTER #M1501004 February 2, 2015 TO ALL IMPLANTS SUPPLIERS OF TRIPLE-S SALUD Billing Application for Implants and Medical Devices Triple-S Salud is constantly striving to improve and simplify our processes. Our commitment is to offer our providers tools that will be useful in the billing process used to charge for services rendered to our members. We now have a tool available that facilitates accurate billing of services rendered. The new online application is known as Billing Application for Implants and Medical Devices. This tool will allow the evaluation of services rendered and will estimate the correct payment before it is invoiced. The tool may be accessed at the following address: https://orthotechpr.com/home/homepage. It will provide you with:
A prompt response in the notification of errors Specific accepted fees for invoicing An increase in clean claims transactions processed by the system, thus allowing
correct payments An efficient process of accounts reconciliation
A guide with screen prints is included to will help you use the application. The following is a reminder of the requirements by line of business:
Triple-S Salud, Inc. requires the following documents for the commercial side of the business:
o Letter of allocation of benefits o Invoice o Operation Report
The Government Health Plan requires the following documents: o Insured’s eligibility letter (active/inactive) o Invoice o Operation Report o Preauthorization in cases that require it
This will be the first step for you to benefit from the Billing Application for Implants and Medical Devices allowing you to collect your invoices in 18 days and avoid overpayments. We hope this tool will be of use to you. For additional information, you may contact the Department of Service Management at (787) 749-4700. Cordially, Gloria M. Lebrón Vice President Participants and Providers Division Enclosure
eClaims Software Manual de Usuario para el Distribuidor
eClaims Software
Manual de Usuario
eClaims Software Manual de Usuario para el Distribuidor
Indice
Como iniciar sesión 1
Pantalla principal del Distribudor 7
Como crear una factura 8
Adicionando elementos a una factura 11
Removiendo elementos de una factura 14
Adicionando documentos de soporte a la factura 15
Eliminando documentos de una factura 18
Administrando Facturas 19
Buscar una factura 19
Filtrar las facturas mostrados en la pantalla 20
Editar, Borrar, Enviar al Analista y Vista Previa 20
Editar Factura 22
Eliminar Factura 23
Enviar al Analista 24
Disputar la decision de una Factura 26
Vista Previa/Imprimir Factura 30
Más ayuda 31
eClaims Software Manual de Usuario para el Distribuidor
Distribuidores
1. Como iniciar sesión
El eClaims Software es una aplicación web, por eso, para poder usarla usted debe abrir un navegador de
Internet e ir a la dirección web http://orthotechpr.com. Hecho esto, una página similar a esta será
mostrada.
eClaims Software Manual de Usuario para el Distribuidor
Una vez que la página este completamente cargada, haga click en el enlace de eClaims™ cerca de la
esquina superior derecha.
Una nueva página sera mostrada, similar a esta:
eClaims Software Manual de Usuario para el Distribuidor
Escriba su nombre de usuario autorizado, su contraseña y haga click en
eClaims Software Manual de Usuario para el Distribuidor
Si todo fué escrito correctamente usted debe estar viendo una pantalla similar a esta:
Esta es la pantalla principal para los distribuidores. Desde aqui podrá controlar casi todo lo relacionado
con sus facturas.
eClaims Software Manual de Usuario para el Distribuidor
2. Distributor Main screen.
La Pantalla Principal del Distributor es el punto de partida principal para crear o administrar sus
facturas
La pantalla luce similar a esta imagen:
Como puede ver, la pantalla principal es presentada en forma de una table que contiene informacion
sobre cada uno de las facturas. Además, en la ultima columna de la derecha usted verá los botones de
accion que permiten hacer diferentes operaciones a la factura correspondiente a esa linea.
eClaims Software Manual de Usuario para el Distribuidor
A. Creando una Factura
Inicialmente el distribuidor no tundra una factura en su pantalla. Comencemos creando una factura
En la pantalla principal, haga click en .
eClaims Software Manual de Usuario para el Distribuidor
Una nueva pantalla se hará visible, similar a esta:
Esta es la Pantalla de Creación de la Factura. Desde esta pantalla usted podrá crear una factura.
Ahora usted puede proceder a llenar los datos en la factura. En los campos que requieren una fecha
usted puede hacer click en el icono del calendario y se mostrara un selector de fecha para hacerle
mas facil entrar el dato.
Con esta herramienta usted puede cambiar facilmente el mes o el año y cuando este seleccionado solo
debe seleccionar el dia del mes y el valor sera puesto en el campo.
eClaims Software Manual de Usuario para el Distribuidor
Importante: Todos los campos son requeridos, exceptuando Patient Mother’s Maiden Name y
Doctor’s Mother Maiden Name. En la sección ICD-9 section, al menos el primer campo es requerido.
Cuando estén llenos todos los campos haga click en Create para crear la factura.
eClaims Software Manual de Usuario para el Distribuidor
Si todo fue hecho correctamente una nueva pantalla sera mostrada. Esta pantalla es la Pantalla de los
Detalles de la Factura y sera similar a esta:
En esta pantalla usted podrá actualizar los detalles de la factura, tales como la informacion del paciente,
etc, pero además, podrá adicionar o administrar los elementos de la factura,y también adicionar los
documentos de soporte relacionados con la misma.
Si usted dese actualizar algun dato basico relacionado con la factura solo haga click el el boton
.
eClaims Software Manual de Usuario para el Distribuidor
B. Adicionando elementos a la factura.
En esta seccion de la pantalla el distribuidor podrá adicionar o eliminar los elementos asociados a la
factura.
Como puede ver , es necesario hacer tres selecciones antes de adicionar un elemento a la factura. El
Procedure Type,(Tipo de procedimiento), la Category (Categoria) y los Items (Elementos) como tal.
Primero, haga click en el seleccionador de Procedure Type y escoja una opcion.
Para nuestro ejercicio usaremos “Join Replacements”, pero en el uso real del sistema usted deberá
escoger el tipo de procedimiento relacionado al elemento que desea adicionar,recuerde, solo usaremos
“Join Replacements” como una demostración en nuestro ejercicio para mostrar cómo es el proceso para
adicionar un elemento a la factura.
Despues de hacer su selección, el selector de Category contendrá solo las opciones asociadas con el tipo
de procedimiento “Joint Replacement” (o cualquier otro tipo seleccionado).
eClaims Software Manual de Usuario para el Distribuidor
De nuevo, para nuestro ejercicio, selecionaremos la categoria “Primary Hip Replacement”. Al hacer la
seleccion,el selector de Items mostrará solo las opciones disponibles asociadas con el tipo de
procedimiento y la categoria seleccionadas, no dejando margen de error para equivocaciones en los
elementos o sus precios.
Como próximo paso, escogeremos el elemento “Femoral Stem Cemented”, con un precio de $1500.00
por elemento.
eClaims Software Manual de Usuario para el Distribuidor
Finalmente, y solo si es necesario, cambiaremos la cantidad de elementos. El valor por defecto sera uno
(1). Para este ejercicio cambiaremos la cantidad a dos(2).
Nota: Un maximo de 15 elementos pueden ser adicionados por cada entrada.
Ahora que ya todas las selecciones han sido hechas es momento de adicionar los elementos. Para
hacerlo, solo necesita hacer click en el boton localizado a la derecha
Si todo fue hecho correctamente usted debe ver un resultado similar a este:
Para adicionar mas elementos solo repita los pasos anteriores.
eClaims Software Manual de Usuario para el Distribuidor
C. Eliminando elementos de una factura
En el caso de que hay adicionado un elemento incorrecto o un error en la cantidad solo haga click en el
enlace Delete localizado al final derecho de la linea que desea eliminar.
eClaims Software Manual de Usuario para el Distribuidor
D. Adicionando documentos de soporte a la factura
En esta seccion de la Pantalla de Detalles de la Factura usted podrá administrar los documentos de
soporte asociados con la factura
Para poder adicionar un document de soporte debe seguir los siguientes pasos.
A. Haga click en el boton .
B. Navegue hacia la carpeta o folder donde se encuentra el documento que desea adicionar a la
factura.
eClaims Software Manual de Usuario para el Distribuidor
C. Seleccione el archivo del documento que desea adicionar y haga click en cuando
este listo.
D. Finalmente, haga click en el boton para proceder.
Si todo fue hecho correctamente usted deberá estar viendo una pantalla similar a esta:
eClaims Software Manual de Usuario para el Distribuidor
Nota: Existen limitaciones con la subida de los archivos. Solo archivos con extension PDF , JPG o GIF son
permitidos. Ademas, hay un limite de tamaño de 5 MB size por archivo.
Si por accidente usted adicionó un archivo incorrect solo haga click en el boton de
localizado debajo del document que desea eliminar.
E. Qu hacer después?
Si su factura ya está completada con toda la información requerida usted puede enviarla al analista
para su revisión. Solo haga click en el boton localizado en la esquina superior
o inferior derecha de la pagina.
Si prefiere seguir trabajando en esta factura mas adelante, solo haga click en el boton
para regresar a la pantalla principal.
eClaims Software Manual de Usuario para el Distribuidor
F. Administrando facturas
Volvamos a la pantalla principal. Aqui podrá encontrar varias opciones para administrar sus facturas.
Buscar una factura
Esta funcionalidad le ayudará a buscar una o varias facturas especificas. Puede buscar por cualquiera de
los siguientes parametros:
a) Patient First Name
b) Patient Middle Name
c) Patient Last Name
d) Patient Maiden Name
e) Patient Phone Number
f) Contract Number
g) Surgeon First Name
h) Surgeon Middle Name
i) Surgeon Last Name
j) Surgeon Phone Number
k) Surgeon Maiden Name
l) NPI Number
eClaims Software Manual de Usuario para el Distribuidor
Filtrar las facturas mostradas en la pantalla
Esta funcionalidad le ayudará a filtrar las facturas mostradas en la pantalla. Los filtros disponibles son:
a) Draft
b) Accepted
c) Rejected
d) Sent
e) Show all
La ultima opcion mostrara las facturas sin filtrarlas. Es la opcion prederteminada
Editar, Eliminar, Enviar al Analista y Vista Previa
eClaims Software Manual de Usuario para el Distribuidor
Editar Factura Esta opcion le llevara a la pantalla de detalles de la factura, en la cual podra hacer cambios a los elementos, detalles o documentos de soporte de la factura. Esta opcion solo estara disponible si la factura esta en estado Draft o Rejected
Eliminar Factura Esta opcion eliminará permanentemente la factura. Esta opcion solo estara disponible si la factura esta en estado Draft o Rejected
Enviar al Analista Esta opcion enviara la factura al analista para su revision. Cambiara el stado de la factura a “Sent to Analyst”. En este estado no podra hacer cambios a la factura.
Vista Previa Mostrara una vista previa de la factura. En esta vista previa podra imprimir la factura o editarla si es permitido
eClaims Software Manual de Usuario para el Distribuidor
Editar Factura
Esta opcion le llevara a la pantalla de detalles de la factura, en la cual podra hacer cambios a los
elementos, detalles o documentos de soporte de la factura.
eClaims Software Manual de Usuario para el Distribuidor
Eliminar Factura
Esta opcion eliminara la factura permanentemente. Antes de ser eliminada una confirmacion sera
requerida. Haga click en OK solo si usted realmente quiere eliminar la factura.
eClaims Software Manual de Usuario para el Distribuidor
Enviar al Analista
Esta opcion enviara la factura al analista para su revision. Antes de ser enviada una confirmacion sera
requerida Haga click en OK solo si usted realmente quiere enviar la factura para su revision.
Nota: Esta acción cambiara el stado de la factura a “Sent to Analyst”. En este estado no podra hacer
cambios a la factura.
¿Que sucederá despues que haya enviado mi factura para revision por el analista?
A) Su factura fué aprobada
Si su factura fue aprobada por el analista entonces sera enviara a la aseguradora para su revision final y
pago. Felicidades por el buen trabajo!
eClaims Software Manual de Usuario para el Distribuidor
B) Su factura es rechazada
Si su factura es rechazada mostrará un estado “Rejected” en la pantalla principal.
En este punto, puede hacer click en el boton para ver la razon por la cual fue rechazada y hacer los
cambios pertinentes.
eClaims Software Manual de Usuario para el Distribuidor
Si en realidad usted omitio por error el document de soporte puede adicionarlo ahora y reenviar su
factura para una nueva revision.
¿Que hacer si usted cree firmemente que su factura esta correcta pero aun asi fue rechazada?
Si usted tiene la conviccion de que su factura esta corecta y contiene todos los requerimientos
(Ejemplo: El analista la rechazó porque falta un documento de soporte pero el documento ya estaba en
la factura) usted tiene una ultima opcion. Usted puede disputer (Dispute) la decision de el analista.
Nota: Esta opcion solo esta disponible en facturas rechazadas previamente por el analista.
Nota: NO HAGA USO INDEBIDO DE ESTA OPCION!. Demasiadas disputas daran inicio a una investigacion
para conocer el origen de las mismas. Solo use esta opcion cuando este seguro de que el analista esta
cometiendo un error.
Para disputar la factura, primero debe editarla , ( ), dentro de esta pantalla encontrará el boton
en la esquina superior derecha. Haga click en el boton.
eClaims Software Manual de Usuario para el Distribuidor
Se mostrara una ventana similar a esta:
eClaims Software Manual de Usuario para el Distribuidor
Escriba la razon por la cual no esta de acuerdo con el analista y haga click en
cuando este listo.
Esto cambiara el estado de su factura a “Disputed”.
eClaims Software Manual de Usuario para el Distribuidor
Despues de hecho esto, el Analista revisará de nuevo la factura teniendo en cuenta sus comentarios.
Un proceso de disputa NO GARANTIZA LA APROBACION DE SU FACTURA!. Si el analista cree que falta
informacion o que la misma esta incorrect, volvera a rechazar su factura y expondra sus comentarios al
respecto
eClaims Software Manual de Usuario para el Distribuidor
Vista Previa/Imprimir Factura
Esta opcion le ayudará a ver su factura en un format listo para ser impreso.Desde esta pantalla podrá
imprimir su factura.
Nota: La historia de eventos no sera mostrada en la impression de su factura, asi como tampoco se
imprimiran los documentos de soporte.Si usted desea imprimir estos documentos debe hacer click en
cada uno de ellos e imprimirlos individualmente.
Cada document de soporte abrirá una nueva ventana. En el caso de un archivo PDF, por favor, use los
controles de impression del visor del pdf y no los controles del navegador.
eClaims Software Manual de Usuario para el Distribuidor
Necesita mas ayuda?
Para más informacion o ayuda contacte a nuestro Servicio al Cliente en esta direccion de correco
electronic: [email protected]
eClaims Software User Manual for Distributor
eClaims Software
User Manual
eClaims Software User Manual for Distributor
Table of contents
How to Log in 1
Distributor Main Screen 7
How to create an invoice 8
Adding Items to an Invoice 11
Removing Items from the Invoice 14
Adding support documents to the invoice 15
Deleting documents from the invoice 18
Managing Invoices 19
Search for an Invoice 19
Filter the invoices shown on the screen 20
Edit, Delete, Send to Analyst and Preview 20
Edit Invoice 22
Delete Invoice 23
Send to Analyst 24
Dispute Invoice Decision 26
Preview/Print Invoice 30
Further help 31
eClaims Software User Manual for Distributor
Distribuitors
1. How to Log in
The eClaims Software is a web application, so, in order to use you must open a web browser and in a
new tab surf to http://orthotechpr.com. A web page similar to this will come out:
eClaims Software User Manual for Distributor
Once the page is completely loaded, click on the eClaims™ link near the upper right corner.
A new page will come out, similar to the following image
eClaims Software User Manual for Distributor
Type you authorized username, password and then click on
eClaims Software User Manual for Distributor
If everything is correct you should now be seeing a screen similar to this one:
This is the main screen for the Distributor user. From here you can control almost everything about your
invoices.
eClaims Software User Manual for Distributor
2. Distributor Main screen.
The Distributor main screen is the starting point for creating and administering your invoices.
This is how the screen looks like.
As you can see, the main screen is presented as a table containing information for each invoice. Also, on
the last column of the right there is some action buttons that perform different operations on the same
row invoice.
eClaims Software User Manual for Distributor
A. Creating an invoice
Initially the distributor won’t have any invoices on the screen. Let’s start then creating a new invoice.
On the main screen, click on the button .
eClaims Software User Manual for Distributor
A new screen will show up, similar to this:
This is the Invoice Creation screen. From this screen you can create a new invoice.
Now you can proceed to fill all the fields on the screen. On the fields requiring a date you can click on
the calendar icon and it will show a date picker tool to make you easier to enter the date.
With the date picket selection tool open you can change the year or the month by clicking on the combo
boxes, and when finished, just click on the desired day of the month and the date will be set on the field.
eClaims Software User Manual for Distributor
Important: All the fields are required except for Patient Mother’s Maiden Name and Doctor’s Mother
Maiden Name. On the ICD-9 section, at least the first field is required.
After all the data fields are completed, click on the button to create the invoice.
eClaims Software User Manual for Distributor
If everything is correct, a new screen will show. This screen is the Invoice Details screen and will look
similar to this:
On this screen you can update the general details of the invoice, like the Patient information etc, but
additionally you can actually add or manage the actual items of the invoice, and also include the support
documents related to the invoice.
If you want to update any information regarding the basic details of the invoice just update the desired
field and click on the button.
eClaims Software User Manual for Distributor
B. Adding Items to the Invoice.
In this section of the screen the user will add or remove the items associated with the invoice.
As you can see, there are three selections you must do before adding an item to the invoice. The
Procedure Type, the Category and the Items itself.
First, click on the Procedure Type selector and pick one option.
For our exercise we will use “Join Replacements”, but you must choose the procedure type related with
the invoice item you are trying to add to the invoice, remember, we will use “Join Replacements” just as
an exercise to demonstrate the process of adding an item to the invoice.
After selecting this, the Category selector will contain all and only the options associated with the “Joint
Replacement” (or other selected) procedure type.
eClaims Software User Manual for Distributor
Again, for our exercise, we will select the “Primary Hip Replacement” category. After selecting this, the
Items selector will be populated with all the possible options associated with this procedure type and
this category, leaving no margin for error for the item selection and the price associated with it.
As the next step, we will choose the “Femoral Stem Cemented” item, with a price of $1500.00 per item.
eClaims Software User Manual for Distributor
And finally we will change the quantity of items (if needed). The default value will be one (1). For this
exercise we will change the value to two (2).
Note: A maximum of 15 items can be added on a single row.
Now that all the selections have been done it’s time to finally add the items. To do so, you only need to
click on the button located to the right.
If everything was done correctly, then you should see something similar to this:
For adding additional items just repeat the steps from the beginning.
eClaims Software User Manual for Distributor
C. Removing Items from the Invoice
In the case that you entered an incorrect item or amount, just click on the Delete link located at the end
of the specific item row.
eClaims Software User Manual for Distributor
D. Adding support documents to the Invoice
In this section of the Invoice Details Screen you are going to be able to manage the support documents
of the invoice.
In order to upload the support document you need to follow these steps.
A. Click on the button.
B. Navigate to the folder where the support documents are located
eClaims Software User Manual for Distributor
C. Select the document to upload and click when ready
D. Finally, click on the button to proceed with the upload.
If everything was done correctly you should end up with some similar to this:
eClaims Software User Manual for Distributor
Note: There are limitations to the file uploads. Only files with the extension PDF , JPG or GIF are
allowed. Also, there is a limit of 5 MB size per file.
If you uploaded an incorrect document file you can delete it by clicking on the button
located below each document.
E. What to do next?
If your invoice is completed and all the information required is already entered, you can send the
invoice to the Analyst for revision. Just click on the button located on the
right top or right bottom of the page.
If you prefer to continue working on the invoice later, just press the to return
to the main screen.
eClaims Software User Manual for Distributor
F. Managing Invoices
Let’s get back to the main screen. In here you will find multiple option to help you manage your invoices.
Search for an Invoice
This functionality will help you to locate a specific or specifics invoices. Inside the text box you can
search by any of the following values:
a) Patient First Name
b) Patient Middle Name
c) Patient Last Name
d) Patient Maiden Name
e) Patient Phone Number
f) Contract Number
g) Surgeon First Name
h) Surgeon Middle Name
i) Surgeon Last Name
j) Surgeon Phone Number
k) Surgeon Maiden Name
l) NPI Number
eClaims Software User Manual for Distributor
Filter the invoices shown on the screen
This will help you to filter the list of your on-screen invoices by their status. The available filters are:
a) Draft
b) Accepted
c) Rejected
d) Sent
e) Show all
The last option will show all invoices unfiltered. This is the default selection.
Edit, Delete, Send to Analyst and Preview
eClaims Software User Manual for Distributor
Edit Invoice This option will take you to the Invoice Detail Screen, where you can make changes to the Invoice details, items, or support documents. This option will only be available if the invoice is in Draft or Rejected status
Delete Invoice This option will try to delete the Invoice. This option will only be available if the invoice is in Draft or Rejected status
Send to Analyst This option will submit the Invoice to the Analyst for reviewing. It will change the status of the status to “Sent to Analyst”. No changes to the invoice are allowed during this state.
Preview Invoice It will show a preview of the Invoice. Inside this preview you can print the Invoice if needed or edit it if allowed.
eClaims Software User Manual for Distributor
Edit Invoice
Clicking in this option on the main screen will take you to the Invoice Details screen, where you can edit
the invoice items, support documents and basic information.
eClaims Software User Manual for Distributor
Delete Invoice
This option will delete the invoice permanently. Before deleting a confirmation box will show up. Click
OK only if you intended to delete the invoice.
eClaims Software User Manual for Distributor
Send to Analyst
This option will send the invoice to revision by an analyst. A dialog box to confirm the action will show
up. Click OK if you intent to send the invoice for revision.
Note: This action will set the status of the invoice to “Sent to Analyst”. While in this status, no
modifications can be done to the invoice.
What will happen after I send my invoice for revision?
A) Your Invoice is approved
If your invoice get approved by an analyst it will be submitted to the insurer for final review and
payment. Congrats!
eClaims Software User Manual for Distributor
B) Your Invoice is rejected
If your invoice is rejected by any reason it will show a “Rejected” status on the table.
At that point, you can click on the option to see the reason for the rejection and to make the
appropriate changes.
eClaims Software User Manual for Distributor
If you indeed missed the required support document you can add it and resubmit the invoice for
revision.
What if the invoice is correct but still got rejected?
If you believe that the invoice is correct and contains the entire required documents and data, but still is
rejected (Ex: the analyst reason for rejection is a missing support document but the document is in
there!) you have one more choice. You can Dispute the decision of the analyst.
Note: This option will only be available to invoices already rejected by an analyst.
Note: DO NOT ABUSE OF THIS OPTION!. Too many disputes will trigger an investigation to find out the
reason of the disputes. Only use when you are sure that an analyst could be mistaken.
To dispute the decision you must edit the invoice details, ( ), and inside this screen you will find the
button on the right top corner.
eClaims Software User Manual for Distributor
A screen similar to this will show up:
eClaims Software User Manual for Distributor
Type your comment on the white box and press when ready.
This will change the status of your invoice to “Disputed”.
eClaims Software User Manual for Distributor
After this, the Analyst will review again your invoice, taking notice from your comments.
A Dispute process DO NOT guarantees the approval of the invoice. If the Analyst still believes that some
information is missing or incorrect it will reject the invoice again, providing comments on the reason for
the new rejection.
eClaims Software User Manual for Distributor
Preview/Print Invoice
This option will help you to preview the invoice in a printable format. From this screen you will have the
option to print your invoice.
Note: The Log history will not be shown on the printed version of your invoice, neither the support
documents. If you need to print the documents you must click on each one of them and print it
separately.
Each support document will open on a new window. On the case of a PDF file, please use the PDF viewer
controls to print and not the browser control.
eClaims Software User Manual for Distributor
Need more help?
For further information or assistance please contact our Customer Service contact at