Hoja técnica
Fecha de creación 7 de mayo de 2014 11:41:56 CEST
Versión del catálogo 10.03.2014 / Nos reservamos el derecho de introducir modificacionestécnicas
1
Z-ReiheZAP/TW ZIA1.5/3L
Weidmüller Interface GmbH & Co. KGKlingenbergstraße 16D-32758 DetmoldGermanyFon: +49 5231 14-0Fax: +49 5231 14-292083www.weidmueller.com
Datos generales para pedido
Tipo ZAP/TW ZIA1.5/3LCódigo 1649540000Versión Z-Reihe, Tapa final, SeparadorGTIN (EAN) 4008190295165U.E. 50 Pieza
Weidmüller ofrece a los usuarios de los bornes de laserie Z una amplia gama de accesorios, que garantizanuna solución adaptada a todos los lugares de trabajo,manteniendo además las funciones estándar.Los accesorios cumplen con los mismos requisitos decalidad que los propios bornes.
Hoja técnica
Z-ReiheZAP/TW ZIA1.5/3L
Weidmüller Interface GmbH & Co. KGKlingenbergstraße 16D-32758 DetmoldGermanyFon: +49 5231 14-0Fax: +49 5231 14-292083www.weidmueller.comDatos técnicos
Fecha de creación 7 de mayo de 2014 11:41:56 CEST
Versión del catálogo 10.03.2014 / Nos reservamos el derecho de introducir modificacionestécnicas
2
Dimensiones y pesos Anchura 5,08 mm Altura 68 mmProfundidad 45,8 mm Peso neto 5,301 g
Temperaturas Temperatura permanete de trabajo, min. -50 °C Temperatura permanete de trabajo, max.120 °C
Otros datos técnicos Indicación de montaje
Montaje directo Versión Tapa final y placa
intermedia
Datos del material Material Wemid Color Beige oscuroGrado inflamabilidad según UL 94 V-0
Valores característicos del sistema Familia del producto Z-Reihe Carril ninguna
Clasificaciones ETIM 3.0 EC000886 UNSPSC 30-21-18-27eClass 5.1 27-14-11-33 eClass 6.2 27-14-11-33eClass 7.1 27-14-11-33
Homologaciones en línea ROHS Conformidad
Hoja técnica
Fecha de creación 7 de mayo de 2014 11:37:41 CEST
Versión del catálogo 10.03.2014 / Nos reservamos el derecho de introducir modificacionestécnicas
1
Z-ReiheZIA 1.5/3L-1S
Weidmüller Interface GmbH & Co. KGKlingenbergstraße 16D-32758 DetmoldGermanyFon: +49 5231 14-0Fax: +49 5231 14-292083www.weidmueller.com
Datos generales para pedido
Tipo ZIA 1.5/3L-1SCódigo 1651980000Versión Borne para sensores y actuadores, Conexión
directa, 1.5 mm², BaseGTIN (EAN) 4008190401634U.E. 100 Pieza
Este sistema modular se basa en los módulos individualesconectables en serie de las regletas distribuidoras conconexión transversal integrada. En un lado se encuentrael contacto hembra, en el otro el contacto macho. Graciasa la construcción modular de placas es posible realizarregletas distribuidoras variables según las aplicaciones.El soporte de estas combinaciones de módulos estáformado por los elementos básicos que se encajan en elcarril TS 35.
Hoja técnica
Z-ReiheZIA 1.5/3L-1S
Weidmüller Interface GmbH & Co. KGKlingenbergstraße 16D-32758 DetmoldGermanyFon: +49 5231 14-0Fax: +49 5231 14-292083www.weidmueller.comDatos técnicos
Fecha de creación 7 de mayo de 2014 11:37:41 CEST
Versión del catálogo 10.03.2014 / Nos reservamos el derecho de introducir modificacionestécnicas
2
Dimensiones y pesos Anchura 5,08 mm Altura 68,5 mmAltura construcción baja 46 mm Profundidad 45,5 mmPeso neto 5,61 g
Temperaturas Temperatura permanete de trabajo, min. -50 °C Temperatura permanete de trabajo, max.120 °C
Conductor embornable (conexión adicional) Sección de conexión del conductor,flexible con terminal tubular DIN46228/1, conexión adicional, min. 0,5 mm²
Sección de conexión del conductor,flexible con terminal tubular DIN46228/1, conexión adicional, max. 1,5 mm²
Conductor embornable (conexión nominal) Tipo de conexión Conexión directa Longitud de desaislado 7 mmDimens. caña destornillador 0,6 x 3,5 mm Dirección de conexión arribaNúmero de conexiones
2 Sección de embornado, conexión
nominal, min. 0,13 mm²Sección de embornado, conexiónnominal, max. 2,5 mm²
Calibre según 60 947-1A1
Sección de conexión del conductor,rígido min., conexión nominal 0,5 mm²
Sección de conexión del conductor,rígido máx., conexión nominal 2,5 mm²
Sección de conexión del conductor,flexible, max. 2,5 mm²
Sección de conexión del conductor,flexible, min. 0,5 mm²
Sección de conexión del conductor,flexible con terminal tubular DIN46228/1, conexión nominal, min. 0,5 mm²
Sección de conexión del conductor,flexible con terminal tubular DIN46228/1, conexión nominal, max. 1,5 mm²
Sección de conexión del conductor,flexible, term. tub. con aislamiento DIN46228/4, conexión nominal , min. 0,5 mm²
Sección de conexión del conductor,flexible, term. tub. con aislamiento DIN46228/4, conexión nominal , max. 1,5 mm²
Terminal tubular doble, min. 0,5 mm² Terminal tubular doble, max. 0,75 mm²Sección de conexión del conductorAWG, min. AWG 26
Sección de conexión del conductorAWG, máx. AWG 14
Datos nominales Sección nominal 1,5 mm² Tensión nominal 250 VSobretensión de choque nominal 4 kV Intensidad nominal 17,5 ANormas IEC 60947-7-1 Grado de polución 3
Datos nominales según CSA Núm. de certificación (CSA) 200039-1068678 Tensión Gr B (CSA) 300 VTensión Gr D (CSA) 300 V Corriente Gr B (CSA) 10 ACorriente Gr D (CSA) 10 A Sección máx. del conductor (CSA) 14 AWGSección mín. del conductor (CSA) 26 AWG
Datos nominales según UL Núm. de certificación (UR) E60693 Tensión Gr D (UR) 300 VCorriente Gr D (UR)
10 A Sección del conductor Cableado de
fábrica máx. (UR) 14 AWGSección del conductor Cableado defábrica mín. (UR) 26 AWG
Sección del conductor Cableado decampo máx. (UR) 14 AWG
Hoja técnica
Z-ReiheZIA 1.5/3L-1S
Weidmüller Interface GmbH & Co. KGKlingenbergstraße 16D-32758 DetmoldGermanyFon: +49 5231 14-0Fax: +49 5231 14-292083www.weidmueller.comDatos técnicos
Fecha de creación 7 de mayo de 2014 11:37:41 CEST
Versión del catálogo 10.03.2014 / Nos reservamos el derecho de introducir modificacionestécnicas
3
Dimensiones Desplazamiento TS 35 32,5 mm
Otros datos técnicos Lados abiertos derecha Tipo de montaje enclavadoVersión Base Versión a prueba de explosivos No
Datos del material Materiales aislantes Wemid Material WemidColor Beige oscuro Grado inflamabilidad según UL 94 V-0
Valores característicos del sistema Familia del producto Z-Reihe Tipo de conexión Conexión directaDirección de conexión arriba Número de pisos 1Número de conexiones 2 Pisos internos puenteados NoCarril TS 35 Tapa final obligatoria Sí
Clasificaciones ETIM 3.0 EC000900 UNSPSC 30-21-18-11eClass 5.1 27-14-11-28 eClass 6.2 27-14-11-28eClass 7.1 27-14-11-28
Observaciones acerca del producto Texto indicativo de datos de pedido ZVL 1.5 O.QV = regleta de distribución sin puente interior para la posición de reserva.Texto indicativo de datos técnicos LED bidireccional en ZIA 1.5/3L-1/LD (1651990000)
Homologaciones en línea Homologaciones
ROHS Conformidad
Descargas DXF 32951_ZIA_1.5-3L-1S_DXF.dxfSTEP 1651980000_32951_ZIA_1.5-3L-1S_STP.stpModelo 3D
Hoja técnica
Z-ReiheZIA 1.5/3L-1S
Weidmüller Interface GmbH & Co. KGKlingenbergstraße 16D-32758 DetmoldGermanyFon: +49 5231 14-0Fax: +49 5231 14-292083www.weidmueller.comAccesorios
Fecha de creación 7 de mayo de 2014 11:37:41 CEST
Versión del catálogo 10.03.2014 / Nos reservamos el derecho de introducir modificacionestécnicas
4
Sin imprimir Los señalizadores ZS, en formato MultiCard, se
han desarrollado especialmente para serie Z. Ofrecenuna gran superficie de señalizaciación. A través delmecanismo de cierre es posible acceder fácilmente a lasconexiones transversales sin necesidad de desmontarlos señalizadores. El rápido montaje queda garantizadomediante las etiquetas individuales en tiras. Las etiquetasindividuales se separan fácilmente.• Superficie del señalizador plegable• Montaje en tiras o individual• Señalizadores en formato MultiCard
Datos generales para pedidoTipo Código Versión GTIN (EAN) U.E. ZS 15/5 MCNE WS
1646630000 Señalizador de bornes,MultiCard, 15 x 5 mm,Poliamida 66, Color: blanco
4008190401214 480 Pieza
Sin imprimir El señalizador dekafix (DEK) es un señalizador universal
para todos los tipos de conectores y grupos electrónicos.El sistema está especialmente indicado para seriesde números cortas y abarca una gran variedad deimpresiones.El montaje de las tiras permite un enclavamiento rápido.La impresión es perfectamente legible, rica en contraste yestá disponible en 5 anchos.• Amplia gama de señalizadores impresos listos para usar• Montaje de tiras para anclaje rápido• Los señalizadores son aptos para todo tipo de
conectores Weidmüller• Se ofrece como tarjetas neutras, en formato MultiCard
o como impresión estándar en tarjetasDatos generales para pedidoTipo Código Versión GTIN (EAN) U.E. DEK 5/5MC-10 NE WS
1609801044 Señalizador de bornes,MultiCard, 5 x 5 mm,Poliamida 66, Color: blanco
4008190397111 1.000 Pieza
Hoja técnica
Z-ReiheZIA 1.5/3L-1S
Weidmüller Interface GmbH & Co. KGKlingenbergstraße 16D-32758 DetmoldGermanyFon: +49 5231 14-0Fax: +49 5231 14-292083www.weidmueller.comAccesorios
Fecha de creación 7 de mayo de 2014 11:37:41 CEST
Versión del catálogo 10.03.2014 / Nos reservamos el derecho de introducir modificacionestécnicas
5
ZGB portaetiquetas giratorio de conjunto ElZGB 15 es un portaetiquetas para conjuntos giratorio.
El portaetiquetas se puede equipar con el señalizador debornes y conectores dekafix 5, WS 12/5 o la etiquetainsertable ESO 15.El ZGB 30 es un portaetiquetas para conjuntos giratorio.El portaetiquetas se puede equipar con el señalizador debornes y conectores dekafix 5, WS 12/5 o la etiquetainsertable ESO 7.Las etiquetas insertables y tiras de protección seencuentran en el apartado de Accesorios.
Datos generales para pedidoTipo Código Versión GTIN (EAN) U.E. ZGB 30 1611930000 Señalizadores de conjunto,
Señalizador de bornes, 32 x7 mm, Poliamida 66, Color:blanco
4008190002251 20 Pieza
ZGB 15 1636530000 Señalizadores de conjunto,Señalizador de bornes, 15 x7 mm, Poliamida 66, Color:blanco
4008190297053 20 Pieza
Destornillador de pala plana Destornillador para tornillos de cabeza ranurada con cuña
redonda, SD DIN 5265, ISO 2380/2, accionamientosegún DIN 5264, ISO 2380/1, punta de cromo superior,mango blando SoftFinish
Datos generales para pedidoTipo Código Versión GTIN (EAN) U.E. SDS0.6X3.5X100
9008330000 Destornillador, Anchura decaña (B): 3.5 mm, Longitudde caña: 100 mm, Solidezde caña (A): 0.6 mm
4032248056286 1 Pieza
Hoja técnica
Z-ReiheZIA 1.5/3L-1S
Weidmüller Interface GmbH & Co. KGKlingenbergstraße 16D-32758 DetmoldGermanyFon: +49 5231 14-0Fax: +49 5231 14-292083www.weidmueller.comAccesorios
Fecha de creación 7 de mayo de 2014 11:37:41 CEST
Versión del catálogo 10.03.2014 / Nos reservamos el derecho de introducir modificacionestécnicas
6
Conexión transversal Para todos los bornes de la serie P se ofrece un sistema
de conexión transversal insertable (ZQV).
Datos generales para pedidoTipo Código Versión GTIN (EAN) U.E. ZQV 2.5/20 1908960000 Z-Reihe, Accesorios,
Conexión transversal, parabornes, Número de polos:20
4032248535293 20 Pieza
ZAP/TW ZIA1.5/3L Weidmüller ofrece a los usuarios de los bornes de la
serie Z una amplia gama de accesorios, que garantizanuna solución adaptada a todos los lugares de trabajo,manteniendo además las funciones estándar.Los accesorios cumplen con los mismos requisitos decalidad que los propios bornes.
Datos generales para pedidoTipo Código Versión GTIN (EAN) U.E. ZAP/TWZIA1.5/3L
1649540000 Z-Reihe, Tapa final,Separador
4008190295165 50 Pieza
Hoja técnica
Z-ReiheZIA 1.5/3L-1S
Weidmüller Interface GmbH & Co. KGKlingenbergstraße 16D-32758 DetmoldGermanyFon: +49 5231 14-0Fax: +49 5231 14-292083www.weidmueller.comAccesorios
Fecha de creación 7 de mayo de 2014 11:37:41 CEST
Versión del catálogo 10.03.2014 / Nos reservamos el derecho de introducir modificacionestécnicas
7
Sin imprimir Los señalizadores WS son el complemento perfecto
para los bornes de la serie W. Gracias a la compatibilidaddel sistema se pueden usar las etiquetas WS también enla serie I y la serie Z. La gran superficie de señalizaciónpermite grandes cadenas de caracteres y distribuir lostextos en varias líneas.Los señalizadores WS están especialmente indicadospara etiquetas con largas cadenas personalizadas decaracteres. El formato MultiCard es ideal para realizartrabajos de señalización con impresora láser, PrintJetADVANCED, plotter o MC-Mobilo. • Montaje en tiras o individual• Señalizadores en formato MultiCard
Datos generales para pedidoTipo Código Versión GTIN (EAN) U.E. WS 8/5 MCNE WS
1640740000 Señalizador de bornes,MultiCard, 8 x 5 mm,Poliamida 66, Color: blanco
4008190279103 720 Pieza
ZQV 2.5 Weidmüller ofrece a los usuarios de los bornes de la
serie Z una amplia gama de accesorios, que garantizanuna solución adaptada a todos los lugares de trabajo,manteniendo además las funciones estándar.Los accesorios cumplen con los mismos requisitos decalidad que los propios bornes.
Datos generales para pedidoTipo Código Versión GTIN (EAN) U.E. ZQV 2.5/7 1608910000 Z-Reihe, Accesorios,
Conexión transversal, parabornes, Número de polos: 7
4008190159665 20 Pieza
ZQV 2.5/6 1608900000 Z-Reihe, Accesorios,Conexión transversal, parabornes, Número de polos: 6
4008190149840 20 Pieza
ZQV 2.5/2 1608860000 Z-Reihe, Accesorios,Conexión transversal, parabornes, Número de polos: 2
4008190123680 60 Pieza
ZQV 2.5/9 1608930000 Z-Reihe, Accesorios,Conexión transversal, parabornes, Número de polos: 9
4008190117009 20 Pieza
ZQV 2.5/4 1608880000 Z-Reihe, Accesorios,Conexión transversal, parabornes, Número de polos: 4
4008190082208 60 Pieza
ZQV 2.5/3 1608870000 Z-Reihe, Accesorios,Conexión transversal, parabornes, Número de polos: 3
4008190061630 60 Pieza
Hoja técnica
Z-ReiheZIA 1.5/3L-1S
Weidmüller Interface GmbH & Co. KGKlingenbergstraße 16D-32758 DetmoldGermanyFon: +49 5231 14-0Fax: +49 5231 14-292083www.weidmueller.comAccesorios
Fecha de creación 7 de mayo de 2014 11:37:41 CEST
Versión del catálogo 10.03.2014 / Nos reservamos el derecho de introducir modificacionestécnicas
8
ZQV 2.5/50 1697540000 Z-Reihe, Accesorios,Conexión transversal, parabornes, Número de polos:50
4008190883256 10 Pieza
ZQV 2.5/8 1608920000 Z-Reihe, Accesorios,Conexión transversal, parabornes, Número de polos: 8
4008190061531 20 Pieza
ZQV 2.5/10 1608940000 Z-Reihe, Accesorios,Conexión transversal, parabornes, Número de polos:10
4008190099060 20 Pieza
ZQV 2.5/5 1608890000 Z-Reihe, Accesorios,Conexión transversal, parabornes, Número de polos: 5
4008190065713 20 Pieza
Hoja técnica
Fecha de creación 7 de mayo de 2014 11:40:12 CEST
Versión del catálogo 10.03.2014 / Nos reservamos el derecho de introducir modificacionestécnicas
1
Borne serie Z con conexión directaZPE 2.5
Weidmüller Interface GmbH & Co. KGKlingenbergstraße 16D-32758 DetmoldGermanyFon: +49 5231 14-0Fax: +49 5231 14-292083www.weidmueller.com
Datos generales para pedido
Tipo ZPE 2.5Código 1608640000Versión Borne serie Z con conexión directa, Borne de
tierra, Sección nominal: 2.5 mm², Conexióndirecta, Wemid, Verde/amarillo
GTIN (EAN) 4008190076733U.E. 100 Pieza
Los bornes de conexión directa, la serie Z, se adaptan deforma especial a las necesidades de los clientes:Espacio mínimo de construcción, superficies amplias deseñalización, detector de ensayo integrado, posibilidad deconexión transversal dentro de la serie Z de la gama debornes de Weidmüller.Los bornes de la serie Z admiten un amplio rangode secciones y cuentan con hasta dos canales deconexiones transversales.
Hoja técnica
Borne serie Z con conexión directaZPE 2.5
Weidmüller Interface GmbH & Co. KGKlingenbergstraße 16D-32758 DetmoldGermanyFon: +49 5231 14-0Fax: +49 5231 14-292083www.weidmueller.comDatos técnicos
Fecha de creación 7 de mayo de 2014 11:40:12 CEST
Versión del catálogo 10.03.2014 / Nos reservamos el derecho de introducir modificacionestécnicas
2
Dimensiones y pesos Anchura 5,1 mm Altura 63 mmAltura construcción baja 39,5 mm Profundidad 38,5 mmPeso neto 11,17 g
Temperaturas Temperatura permanete de trabajo, min. -50 °C Temperatura permanete de trabajo, max.120 °C
IECEx/ATEX nominales Núm. de certificación (ATEX) KEMA97ATEX2521U Certificado ATEX KEMA97ATEX2521U_d.pdfCertificado ATEX KEMA97ATEX2521U_e.pdf Certificado IECEx IECEXULD05.0009U_e.pdfSección máx. del conductor (ATEX) 2.5 mm² Tensión con. trans. CrossConnectionGuide.pdfGama de temperaturas de servicio Rango de temperatura de
funcionamiento, véaseCertificado de prueba detipo CE/Certificado deConformidad IECEx
Caracterización EN 60079-7
Ex e IICaracterización Ex-RL 94/9 EG II 2 G D
Conductor embornable (conexión adicional) Sección de conexión del conductor,flexible con terminal tubular DIN46228/1, conexión adicional, min. 0,5 mm²
Sección de conexión del conductor,flexible con terminal tubular DIN46228/1, conexión adicional, max. 2,5 mm²
Conductor embornable (conexión nominal) Tipo de conexión Conexión directa Longitud de desaislado 10 mmDimens. caña destornillador 0,6 x 3,5 mm Dirección de conexión arribaNúmero de conexiones
2 Sección de embornado, conexión
nominal, min. 0,05 mm²Sección de embornado, conexiónnominal, max. 4 mm²
Calibre según 60 947-1A3
Sección de conexión del conductor,rígido min., conexión nominal 0,5 mm²
Sección de conexión del conductor,rígido máx., conexión nominal 4 mm²
Sección de conexión del conductor,flexible, max. 4 mm²
Sección de conexión del conductor,flexible, min. 0,5 mm²
Sección de conexión del conductor,flexible con terminal tubular DIN46228/1, conexión nominal, min. 0,5 mm²
Sección de conexión del conductor,flexible con terminal tubular DIN46228/1, conexión nominal, max. 2,5 mm²
Sección de conexión del conductor,flexible, term. tub. con aislamiento DIN46228/4, conexión nominal , min. 0,5 mm²
Sección de conexión del conductor,flexible, term. tub. con aislamiento DIN46228/4, conexión nominal , max. 2,5 mm²
Sección de conexión del conductorAWG, min. AWG 30
Sección de conexión del conductorAWG, máx. AWG 12
Datos nominales Sección nominal 2,5 mm² Tensión nominal para bornes contiguos 800 VSobretensión de choque nominal parabornes contiguos 8 kV
NormasIEC 60947-7-2
Grado de polución 3
Hoja técnica
Borne serie Z con conexión directaZPE 2.5
Weidmüller Interface GmbH & Co. KGKlingenbergstraße 16D-32758 DetmoldGermanyFon: +49 5231 14-0Fax: +49 5231 14-292083www.weidmueller.comDatos técnicos
Fecha de creación 7 de mayo de 2014 11:40:12 CEST
Versión del catálogo 10.03.2014 / Nos reservamos el derecho de introducir modificacionestécnicas
3
Datos nominales según CSA Núm. de certificación (CSA) 200039-1152892 Sección máx. del conductor (CSA) 12 AWGSección mín. del conductor (CSA) 26 AWG
Datos nominales según UL Núm. de certificación (UR)
E60693 Sección del conductor Cableado de
fábrica máx. (UR) 12 AWGSección del conductor Cableado defábrica mín. (UR) 30 AWG
Sección del conductor Cableado decampo máx. (UR) 12 AWG
Otros datos técnicos Lados abiertos derecha Número de bornes iguales 1Tipo de montaje
enclavado
Versión Conexión directa, Conconexión de tierra, abiertopor un extremo
Versión a prueba de explosivos RAL 7001
Datos del material Materiales aislantes Wemid Material WemidColor amarillo, verde Grado inflamabilidad según UL 94 V-0
Valores característicos del sistema Familia del producto Borne serie Z con conexión
directa Tipo de conexión
Conexión directaDirección de conexión arriba Número de pisos 1Número de conexiones
2 Número de puntos de embornado por
piso 2Pisos internos puenteados No Carril TS 35Tapa final obligatoria Sí
Clasificaciones ETIM 3.0 EC000901 UNSPSC 30-21-18-11eClass 5.1 27-14-03-05 eClass 6.2 27-14-03-05eClass 7.1 27-14-03-05
Homologaciones en línea Homologaciones
ROHS Conformidad
Hoja técnica
Borne serie Z con conexión directaZPE 2.5
Weidmüller Interface GmbH & Co. KGKlingenbergstraße 16D-32758 DetmoldGermanyFon: +49 5231 14-0Fax: +49 5231 14-292083www.weidmueller.comAccesorios
Fecha de creación 7 de mayo de 2014 11:40:12 CEST
Versión del catálogo 10.03.2014 / Nos reservamos el derecho de introducir modificacionestécnicas
4
Sin imprimir Los señalizadores ZS, en formato MultiCard, se
han desarrollado especialmente para serie Z. Ofrecenuna gran superficie de señalizaciación. A través delmecanismo de cierre es posible acceder fácilmente a lasconexiones transversales sin necesidad de desmontarlos señalizadores. El rápido montaje queda garantizadomediante las etiquetas individuales en tiras. Las etiquetasindividuales se separan fácilmente.• Superficie del señalizador plegable• Montaje en tiras o individual• Señalizadores en formato MultiCard
Datos generales para pedidoTipo Código Versión GTIN (EAN) U.E. ZS 15/5 MCNE WS
1646630000 Señalizador de bornes,MultiCard, 15 x 5 mm,Poliamida 66, Color: blanco
4008190401214 480 Pieza
Sin imprimir El señalizador dekafix (DEK) es un señalizador universal
para todos los tipos de conectores y grupos electrónicos.El sistema está especialmente indicado para seriesde números cortas y abarca una gran variedad deimpresiones.El montaje de las tiras permite un enclavamiento rápido.La impresión es perfectamente legible, rica en contraste yestá disponible en 5 anchos.• Amplia gama de señalizadores impresos listos para usar• Montaje de tiras para anclaje rápido• Los señalizadores son aptos para todo tipo de
conectores Weidmüller• Se ofrece como tarjetas neutras, en formato MultiCard
o como impresión estándar en tarjetasDatos generales para pedidoTipo Código Versión GTIN (EAN) U.E. DEK 5/5MC-10 NE WS
1609801044 Señalizador de bornes,MultiCard, 5 x 5 mm,Poliamida 66, Color: blanco
4008190397111 1.000 Pieza
Hoja técnica
Borne serie Z con conexión directaZPE 2.5
Weidmüller Interface GmbH & Co. KGKlingenbergstraße 16D-32758 DetmoldGermanyFon: +49 5231 14-0Fax: +49 5231 14-292083www.weidmueller.comAccesorios
Fecha de creación 7 de mayo de 2014 11:40:12 CEST
Versión del catálogo 10.03.2014 / Nos reservamos el derecho de introducir modificacionestécnicas
5
Sin imprimir Los señalizadores ZS, en formato MultiCard, se
han desarrollado especialmente para serie Z. Ofrecenuna gran superficie de señalizaciación. A través delmecanismo de cierre es posible acceder fácilmente a lasconexiones transversales sin necesidad de desmontarlos señalizadores. El rápido montaje queda garantizadomediante las etiquetas individuales en tiras. Las etiquetasindividuales se separan fácilmente.• Superficie del señalizador plegable• Montaje en tiras o individual• Señalizadores en formato MultiCard
Datos generales para pedidoTipo Código Versión GTIN (EAN) U.E. ZS 10/5 MCNE WS
1610000000 Señalizador de bornes,MultiCard, 10 x 5 mm,Poliamida 66, Color: blanco
4008190263171 480 Pieza
ZAP/TW 1 Weidmüller ofrece a los usuarios de los bornes de la
serie Z una amplia gama de accesorios, que garantizanuna solución adaptada a todos los lugares de trabajo,manteniendo además las funciones estándar.Los accesorios cumplen con los mismos requisitos decalidad que los propios bornes.
Datos generales para pedidoTipo Código Versión GTIN (EAN) U.E. ZAP/TW 1 RT 1683660000 Z-Reihe, Tapa final,
Separador4008190483111 50 Pieza
ZAP/TW 1 1608740000 Z-Reihe, Accesorios, Tapafinal, Separador
4008190190859 50 Pieza
ZAP/TW 1 GN 1683680000 Z-Reihe, Tapa final,Separador
4008190476489 50 Pieza
ZAP/TW 1 GR 1683710000 Z-Reihe, Tapa final,Separador
4008190476793 50 Pieza
ZAP/TW 1 OR 1608760000 Z-Reihe, Tapa final,Separador
4008190190873 50 Pieza
ZAP/TW 1 BL 1608750000 Z-Reihe, Accesorios, Tapafinal, Separador
4008190190866 50 Pieza
Hoja técnica
Borne serie Z con conexión directaZPE 2.5
Weidmüller Interface GmbH & Co. KGKlingenbergstraße 16D-32758 DetmoldGermanyFon: +49 5231 14-0Fax: +49 5231 14-292083www.weidmueller.comAccesorios
Fecha de creación 7 de mayo de 2014 11:40:12 CEST
Versión del catálogo 10.03.2014 / Nos reservamos el derecho de introducir modificacionestécnicas
6
Sin imprimir Los señalizadores WS son el complemento perfecto
para los bornes de la serie W. Gracias a la compatibilidaddel sistema se pueden usar las etiquetas WS también enla serie I y la serie Z. La gran superficie de señalizaciónpermite grandes cadenas de caracteres y distribuir lostextos en varias líneas.Los señalizadores WS están especialmente indicadospara etiquetas con largas cadenas personalizadas decaracteres. El formato MultiCard es ideal para realizartrabajos de señalización con impresora láser, PrintJetADVANCED, plotter o MC-Mobilo. • Montaje en tiras o individual• Señalizadores en formato MultiCard
Datos generales para pedidoTipo Código Versión GTIN (EAN) U.E. WS 10/15MC NE WS
1854090000 Señalizador de bornes,MultiCard, 10 x 15 mm,Poliamida 66, Color: blanco
4032248390694 240 Pieza
ZGB portaetiquetas giratorio de conjunto ElZGB 15 es un portaetiquetas para conjuntos giratorio.
El portaetiquetas se puede equipar con el señalizador debornes y conectores dekafix 5, WS 12/5 o la etiquetainsertable ESO 15.El ZGB 30 es un portaetiquetas para conjuntos giratorio.El portaetiquetas se puede equipar con el señalizador debornes y conectores dekafix 5, WS 12/5 o la etiquetainsertable ESO 7.Las etiquetas insertables y tiras de protección seencuentran en el apartado de Accesorios.
Datos generales para pedidoTipo Código Versión GTIN (EAN) U.E. ZGB 30 1611930000 Señalizadores de conjunto,
Señalizador de bornes, 32 x7 mm, Poliamida 66, Color:blanco
4008190002251 20 Pieza
ZGB 15 1636530000 Señalizadores de conjunto,Señalizador de bornes, 15 x7 mm, Poliamida 66, Color:blanco
4008190297053 20 Pieza
ZGB 30/3.5 1778290000 Señalizadores de conjunto,Señalizador de bornes, 32 x7 mm, Poliamida 66, Color:blanco
4032248161065 20 Pieza
Hoja técnica
Borne serie Z con conexión directaZPE 2.5
Weidmüller Interface GmbH & Co. KGKlingenbergstraße 16D-32758 DetmoldGermanyFon: +49 5231 14-0Fax: +49 5231 14-292083www.weidmueller.comAccesorios
Fecha de creación 7 de mayo de 2014 11:40:12 CEST
Versión del catálogo 10.03.2014 / Nos reservamos el derecho de introducir modificacionestécnicas
7
Destornillador de pala plana Destornillador para tornillos de cabeza ranurada con cuña
redonda, SD DIN 5265, ISO 2380/2, accionamientosegún DIN 5264, ISO 2380/1, punta de cromo superior,mango blando SoftFinish
Datos generales para pedidoTipo Código Versión GTIN (EAN) U.E. SDS0.6X3.5X200
9010110000 Destornillador, Anchura decaña (B): 3.5 mm, Longitudde caña: 200 mm, Solidezde caña (A): 0.6 mm
4032248300754 1 Pieza
Para carril TS 35 Para garantizar un asiento seguro y duradero sobre el
carril y para evitar el deslizamiento, Weidmüller disponede los ángulos de fijación. Se dispone de diseños cono sin tornillo. Existe la posibilidad de colocar sobre elángulo de fijación señalizadores, incluso señalizadoresde conjunto y la posibilidad de alojar una conector deprueba.
Datos generales para pedidoTipo Código Versión GTIN (EAN) U.E. WEW 35/1 1059000000 Accesorios, Ángulo de
fijación lateral4008190172282 50 Pieza
ZEW 35/2 8630740000 Accesorios, Ángulo defijación lateral
4032248348916 20 Pieza
EW 35 GR7032
0383530000 Accesorios, Ángulo defijación lateral
4008190027322 50 Pieza
WEW 35/2 1061200000 Accesorios, Ángulo defijación lateral
4008190030230 100 Pieza
EW 35 0383560000 Accesorios, Ángulo defijación lateral
4008190181314 50 Pieza
ZEW 35 9540000000 Accesorios, Ángulo defijación lateral
4008190956264 20 Pieza
EW 35/SCHA/M3
0258660000 Accesorios, Ángulo defijación lateral
4008190033477 20 Pieza
Hoja técnica
Borne serie Z con conexión directaZPE 2.5
Weidmüller Interface GmbH & Co. KGKlingenbergstraße 16D-32758 DetmoldGermanyFon: +49 5231 14-0Fax: +49 5231 14-292083www.weidmueller.comAccesorios
Fecha de creación 7 de mayo de 2014 11:40:12 CEST
Versión del catálogo 10.03.2014 / Nos reservamos el derecho de introducir modificacionestécnicas
8
Sin imprimir Los señalizadores WS son el complemento perfecto
para los bornes de la serie W. Gracias a la compatibilidaddel sistema se pueden usar las etiquetas WS también enla serie I y la serie Z. La gran superficie de señalizaciónpermite grandes cadenas de caracteres y distribuir lostextos en varias líneas.Los señalizadores WS están especialmente indicadospara etiquetas con largas cadenas personalizadas decaracteres. El formato MultiCard es ideal para realizartrabajos de señalización con impresora láser, PrintJetADVANCED, plotter o MC-Mobilo. • Montaje en tiras o individual• Señalizadores en formato MultiCard
Datos generales para pedidoTipo Código Versión GTIN (EAN) U.E. WS 10/5 MCNE WS
1635000000 Señalizador de bornes,MultiCard, 10 x 5 mm,Poliamida 66, Color: blanco
4008190261948 720 Pieza
WS 10/5 MCM NE WS
1792000000 Señalizador de bornes,MultiCard, 10 x 5 mm,Poliamida 66, Color: blanco
4032248223862 720 Pieza
ZTA 1 Weidmüller ofrece a los usuarios de los bornes de la
serie Z una amplia gama de accesorios, que garantizanuna solución adaptada a todos los lugares de trabajo,manteniendo además las funciones estándar.Los accesorios cumplen con los mismos requisitos decalidad que los propios bornes.
Datos generales para pedidoTipo Código Versión GTIN (EAN) U.E. ZTA 1/ZA 1609050000 Adaptador de prueba,
Tensión de mando nominal:4008190206543 25 Pieza
ZTA 1 1609040000 Adaptador de prueba,Tensión de mando nominal:
4008190196851 25 Pieza
Hoja técnica
Borne serie Z con conexión directaZPE 2.5
Weidmüller Interface GmbH & Co. KGKlingenbergstraße 16D-32758 DetmoldGermanyFon: +49 5231 14-0Fax: +49 5231 14-292083www.weidmueller.comAccesorios
Fecha de creación 7 de mayo de 2014 11:40:12 CEST
Versión del catálogo 10.03.2014 / Nos reservamos el derecho de introducir modificacionestécnicas
9
STR tiras transparentes Con los diferentes señalizadores para conectores de
Weidmüller los usuarios puede resolver prácticamentecualquier tarea de identificación de todas las conexionesde la instalación. Ya sean etiquetas múltiples,señalizadores listos para usar con impresión estándar oetiquetado especial, señalizadores blancos o de color,o rotulaciones en los puntos de embornado, el amplioprograma de productos resuelve cualquier tarea deseñalización de manera sencilla, rápida y clara.
Datos generales para pedidoTipo Código Versión GTIN (EAN) U.E. STR 7 F.SCHT7
0515300000 Señalizador de bornes, 27 x6.3 mm, Poliéster, sin PVC,Color: transparente
4008190182175 20 Pieza
Sin imprimir Los señalizadores ZS, en formato MultiCard, se
han desarrollado especialmente para serie Z. Ofrecenuna gran superficie de señalizaciación. A través delmecanismo de cierre es posible acceder fácilmente a lasconexiones transversales sin necesidad de desmontarlos señalizadores. El rápido montaje queda garantizadomediante las etiquetas individuales en tiras. Las etiquetasindividuales se separan fácilmente.• Superficie del señalizador plegable• Montaje en tiras o individual• Señalizadores en formato MultiCard
Datos generales para pedidoTipo Código Versión GTIN (EAN) U.E. ZS 12/6 MCNE WS
1610020000 Señalizador de bornes,MultiCard, 12 x 6 mm,Poliamida 66, Color: blanco
4008190444600 400 Pieza
Hoja técnica
Borne serie Z con conexión directaZPE 2.5
Weidmüller Interface GmbH & Co. KGKlingenbergstraße 16D-32758 DetmoldGermanyFon: +49 5231 14-0Fax: +49 5231 14-292083www.weidmueller.comAccesorios
Fecha de creación 7 de mayo de 2014 11:40:12 CEST
Versión del catálogo 10.03.2014 / Nos reservamos el derecho de introducir modificacionestécnicas
10
Clavija de prueba Una comprobación de la instalación garantiza la solución
con conectores y manguitos de prueba Weidmüller.
Datos generales para pedidoTipo Código Versión GTIN (EAN) U.E. PS 2.3 RT 0180400000 Accesorios, Clavija de
prueba4008190060121 20 Pieza
Hoja técnica
Fecha de creación 7 de mayo de 2014 11:38:50 CEST
Versión del catálogo 10.03.2014 / Nos reservamos el derecho de introducir modificacionestécnicas
1
Z-ReiheZVL 1.5 BL
Weidmüller Interface GmbH & Co. KGKlingenbergstraße 16D-32758 DetmoldGermanyFon: +49 5231 14-0Fax: +49 5231 14-292083www.weidmueller.com
Datos generales para pedido
Tipo ZVL 1.5 BLCódigo 1650360000Versión Conector, Conexión directa, 1.5 mm², Regleta
distribuidora, azulGTIN (EAN) 4008190297541U.E. 100 Pieza
Este sistema modular se basa en los módulos individualesconectables en serie de las regletas distribuidoras conconexión transversal integrada. En un lado se encuentrael contacto hembra, en el otro el contacto macho. Graciasa la construcción modular de placas es posible realizarregletas distribuidoras variables según las aplicaciones.El soporte de estas combinaciones de módulos estáformado por los elementos básicos que se encajan en elcarril TS 35.
Hoja técnica
Z-ReiheZVL 1.5 BL
Weidmüller Interface GmbH & Co. KGKlingenbergstraße 16D-32758 DetmoldGermanyFon: +49 5231 14-0Fax: +49 5231 14-292083www.weidmueller.comDatos técnicos
Fecha de creación 7 de mayo de 2014 11:38:50 CEST
Versión del catálogo 10.03.2014 / Nos reservamos el derecho de introducir modificacionestécnicas
2
Dimensiones y pesos Anchura 5,08 mm Altura 12,9 mmAltura construcción baja 17,45 mm Profundidad 17,45 mmPeso neto 1,26 g
Temperaturas Temperatura permanete de trabajo, min. -50 °C Temperatura permanete de trabajo, max.120 °C
Conductor embornable (conexión adicional) Sección de conexión del conductor,flexible con terminal tubular DIN46228/1, conexión adicional, min. 0,5 mm²
Sección de conexión del conductor,flexible con terminal tubular DIN46228/1, conexión adicional, max. 1,5 mm²
Conductor embornable (conexión nominal) Tipo de conexión Conexión directa Longitud de desaislado 7 mmDimens. caña destornillador 0,6 x 3,5 mm Dirección de conexión arribaNúmero de conexiones
1 Sección de embornado, conexión
nominal, min. 0,13 mm²Sección de embornado, conexiónnominal, max. 2,5 mm²
Calibre según 60 947-1A2
Sección de conexión del conductor,rígido min., conexión nominal 0,5 mm²
Sección de conexión del conductor,rígido máx., conexión nominal 2,5 mm²
Sección de conexión del conductor,flexible, max. 2,5 mm²
Sección de conexión del conductor,flexible, min. 0,5 mm²
Sección de conexión del conductor,flexible con terminal tubular DIN46228/1, conexión nominal, min. 0,5 mm²
Sección de conexión del conductor,flexible con terminal tubular DIN46228/1, conexión nominal, max. 1,5 mm²
Sección de conexión del conductor,flexible, term. tub. con aislamiento DIN46228/4, conexión nominal , min. 0,5 mm²
Sección de conexión del conductor,flexible, term. tub. con aislamiento DIN46228/4, conexión nominal , max. 2,5 mm²
Terminal tubular doble, min. 0,5 mm² Terminal tubular doble, max. 0,75 mm²Sección de conexión del conductorAWG, min. AWG 26
Sección de conexión del conductorAWG, máx. AWG 14
Datos nominales Sección nominal 1,5 mm² Tensión nominal 250 VSobretensión de choque nominal 4 kV Intensidad nominal 17,5 ANormas IEC 60947-7-1 Grado de polución 3
Datos nominales según CSA Núm. de certificación (CSA) 200039-1068678 Tensión Gr B (CSA) 300 VTensión Gr D (CSA) 300 V Corriente Gr B (CSA) 10 ACorriente Gr D (CSA) 10 A Sección máx. del conductor (CSA) 14 AWGSección mín. del conductor (CSA) 26 AWG
Datos nominales según UL Núm. de certificación (UR) E60693 Tensión Gr D (UR) 300 VCorriente Gr D (UR)
10 A Sección del conductor Cableado de
fábrica máx. (UR) 14 AWGSección del conductor Cableado defábrica mín. (UR) 26 AWG
Sección del conductor Cableado decampo máx. (UR) 14 AWG
Hoja técnica
Z-ReiheZVL 1.5 BL
Weidmüller Interface GmbH & Co. KGKlingenbergstraße 16D-32758 DetmoldGermanyFon: +49 5231 14-0Fax: +49 5231 14-292083www.weidmueller.comDatos técnicos
Fecha de creación 7 de mayo de 2014 11:38:50 CEST
Versión del catálogo 10.03.2014 / Nos reservamos el derecho de introducir modificacionestécnicas
3
Dimensiones Desplazamiento TS 35 10 mm
Otros datos técnicos Lados abiertos derecha Tipo de montaje insertadoVersión Regleta distribuidora Versión a prueba de explosivos No
Datos del material Materiales aislantes Wemid Material WemidColor azul Grado inflamabilidad según UL 94 V-0
Valores característicos del sistema Familia del producto Z-Reihe Tipo de conexión Conexión directaDirección de conexión arriba Número de pisos 1Número de conexiones 1 Pisos internos puenteados NoCarril ninguna Tapa final obligatoria Sí
Clasificaciones ETIM 3.0 EC000900 UNSPSC 30-21-18-11eClass 5.1 27-14-11-28 eClass 6.2 27-14-11-28eClass 7.1 27-14-11-28
Observaciones acerca del producto Texto indicativo de datos de pedido ZVL 1.5 O.QV = regleta de distribución sin puente interior para la posición de reserva.Texto indicativo de accesorios Conexiones transversales integradas.
Regleta de distribución para base ZPV 1,5 código 1676630000.
Homologaciones en línea Homologaciones
ROHS Conformidad
Descargas STEP 1650360000_21989_ZVL_1.5_BL_STP.stpModelo 3D
Hoja técnica
Z-ReiheZVL 1.5 BL
Weidmüller Interface GmbH & Co. KGKlingenbergstraße 16D-32758 DetmoldGermanyFon: +49 5231 14-0Fax: +49 5231 14-292083www.weidmueller.comAccesorios
Fecha de creación 7 de mayo de 2014 11:38:50 CEST
Versión del catálogo 10.03.2014 / Nos reservamos el derecho de introducir modificacionestécnicas
4
Impresión especial El señalizador dekafix (DEK) es un señalizador universal
para todos los tipos de conectores y grupos electrónicos.El sistema está especialmente indicado para seriesde números cortas y abarca una gran variedad deimpresiones.El montaje de las tiras permite un enclavamiento rápido.La impresión es perfectamente legible, rica en contraste yestá disponible en 5 anchos.• Amplia gama de señalizadores impresos listos para usar• Montaje de tiras para anclaje rápido• Los señalizadores son aptos para todo tipo de
conectores Weidmüller• Se ofrece como tarjetas neutras, en formato MultiCard
o como impresión estándar en tarjetasDatos generales para pedidoTipo Código Versión GTIN (EAN) U.E. DEK 5/5 MCSDR
1609810000 Señalizador de bornes,MultiCard, 5 x 5 mm,Poliamida 66, Color: bajodemanda
4008190456597 200 Pieza
Destornillador de pala plana Destornillador para tornillos de cabeza ranurada con cuña
redonda, SD DIN 5265, ISO 2380/2, accionamientosegún DIN 5264, ISO 2380/1, punta de cromo superior,mango blando SoftFinish
Datos generales para pedidoTipo Código Versión GTIN (EAN) U.E. SDS0.6X3.5X100
9008330000 Destornillador, Anchura decaña (B): 3.5 mm, Longitudde caña: 100 mm, Solidezde caña (A): 0.6 mm
4032248056286 1 Pieza
Hoja técnica
Fecha de creación 7 de mayo de 2014 11:39:29 CEST
Versión del catálogo 10.03.2014 / Nos reservamos el derecho de introducir modificacionestécnicas
1
Z-ReiheZVL 1.5 BR
Weidmüller Interface GmbH & Co. KGKlingenbergstraße 16D-32758 DetmoldGermanyFon: +49 5231 14-0Fax: +49 5231 14-292083www.weidmueller.com
Datos generales para pedido
Tipo ZVL 1.5 BRCódigo 1650370000Versión Conector, Conexión directa, 1.5 mm², Regleta
distribuidora, marrónGTIN (EAN) 4008190297558U.E. 100 Pieza
Este sistema modular se basa en los módulos individualesconectables en serie de las regletas distribuidoras conconexión transversal integrada. En un lado se encuentrael contacto hembra, en el otro el contacto macho. Graciasa la construcción modular de placas es posible realizarregletas distribuidoras variables según las aplicaciones.El soporte de estas combinaciones de módulos estáformado por los elementos básicos que se encajan en elcarril TS 35.
Hoja técnica
Z-ReiheZVL 1.5 BR
Weidmüller Interface GmbH & Co. KGKlingenbergstraße 16D-32758 DetmoldGermanyFon: +49 5231 14-0Fax: +49 5231 14-292083www.weidmueller.comDatos técnicos
Fecha de creación 7 de mayo de 2014 11:39:29 CEST
Versión del catálogo 10.03.2014 / Nos reservamos el derecho de introducir modificacionestécnicas
2
Dimensiones y pesos Anchura 5,08 mm Altura 12,9 mmAltura construcción baja 17,45 mm Profundidad 17,45 mmPeso neto 1,24 g
Temperaturas Temperatura permanete de trabajo, min. -50 °C Temperatura permanete de trabajo, max.120 °C
Conductor embornable (conexión adicional) Sección de conexión del conductor,flexible con terminal tubular DIN46228/1, conexión adicional, min. 0,5 mm²
Sección de conexión del conductor,flexible con terminal tubular DIN46228/1, conexión adicional, max. 1,5 mm²
Conductor embornable (conexión nominal) Tipo de conexión Conexión directa Longitud de desaislado 7 mmDimens. caña destornillador 0,6 x 3,5 mm Dirección de conexión arribaNúmero de conexiones
1 Sección de embornado, conexión
nominal, min. 0,13 mm²Sección de embornado, conexiónnominal, max. 2,5 mm²
Calibre según 60 947-1A2
Sección de conexión del conductor,rígido min., conexión nominal 0,5 mm²
Sección de conexión del conductor,rígido máx., conexión nominal 2,5 mm²
Sección de conexión del conductor,flexible, max. 2,5 mm²
Sección de conexión del conductor,flexible, min. 0,5 mm²
Sección de conexión del conductor,flexible con terminal tubular DIN46228/1, conexión nominal, min. 0,5 mm²
Sección de conexión del conductor,flexible con terminal tubular DIN46228/1, conexión nominal, max. 1,5 mm²
Sección de conexión del conductor,flexible, term. tub. con aislamiento DIN46228/4, conexión nominal , min. 0,5 mm²
Sección de conexión del conductor,flexible, term. tub. con aislamiento DIN46228/4, conexión nominal , max. 2,5 mm²
Terminal tubular doble, min. 0,5 mm² Terminal tubular doble, max. 0,75 mm²Sección de conexión del conductorAWG, min. AWG 26
Sección de conexión del conductorAWG, máx. AWG 14
Datos nominales Sección nominal 1,5 mm² Tensión nominal 250 VSobretensión de choque nominal 4 kV Intensidad nominal 17,5 ANormas IEC 60947-7-1 Grado de polución 3
Datos nominales según CSA Núm. de certificación (CSA) 200039-1068678 Tensión Gr B (CSA) 300 VTensión Gr D (CSA) 300 V Corriente Gr B (CSA) 10 ACorriente Gr D (CSA) 10 A Sección máx. del conductor (CSA) 14 AWGSección mín. del conductor (CSA) 26 AWG
Datos nominales según UL Núm. de certificación (UR) E60693 Tensión Gr D (UR) 300 VCorriente Gr D (UR)
10 A Sección del conductor Cableado de
fábrica máx. (UR) 14 AWGSección del conductor Cableado defábrica mín. (UR) 26 AWG
Sección del conductor Cableado decampo máx. (UR) 14 AWG
Hoja técnica
Z-ReiheZVL 1.5 BR
Weidmüller Interface GmbH & Co. KGKlingenbergstraße 16D-32758 DetmoldGermanyFon: +49 5231 14-0Fax: +49 5231 14-292083www.weidmueller.comDatos técnicos
Fecha de creación 7 de mayo de 2014 11:39:29 CEST
Versión del catálogo 10.03.2014 / Nos reservamos el derecho de introducir modificacionestécnicas
3
Dimensiones Desplazamiento TS 35 10 mm
Otros datos técnicos Lados abiertos derecha Tipo de montaje insertadoVersión Regleta distribuidora Versión a prueba de explosivos No
Datos del material Materiales aislantes Wemid Material WemidColor marrón Grado inflamabilidad según UL 94 V-0
Valores característicos del sistema Familia del producto Z-Reihe Tipo de conexión Conexión directaDirección de conexión arriba Número de pisos 1Número de conexiones 1 Pisos internos puenteados NoCarril ninguna Tapa final obligatoria Sí
Clasificaciones ETIM 3.0 EC000900 UNSPSC 30-21-18-11eClass 5.1 27-14-11-28 eClass 6.2 27-14-11-28eClass 7.1 27-14-11-28
Observaciones acerca del producto Texto indicativo de datos de pedido ZVL 1.5 O.QV = regleta de distribución sin puente interior para la posición de reserva.Texto indicativo de accesorios Conexiones transversales integradas.
Regleta de distribución para base ZPV 1,5 código 1676630000.
Homologaciones en línea Homologaciones
ROHS Conformidad
Descargas STEP 1650370000_21989_ZVL_1.5_BR_STP.stpModelo 3D
Hoja técnica
Z-ReiheZVL 1.5 BR
Weidmüller Interface GmbH & Co. KGKlingenbergstraße 16D-32758 DetmoldGermanyFon: +49 5231 14-0Fax: +49 5231 14-292083www.weidmueller.comAccesorios
Fecha de creación 7 de mayo de 2014 11:39:29 CEST
Versión del catálogo 10.03.2014 / Nos reservamos el derecho de introducir modificacionestécnicas
4
Impresión especial El señalizador dekafix (DEK) es un señalizador universal
para todos los tipos de conectores y grupos electrónicos.El sistema está especialmente indicado para seriesde números cortas y abarca una gran variedad deimpresiones.El montaje de las tiras permite un enclavamiento rápido.La impresión es perfectamente legible, rica en contraste yestá disponible en 5 anchos.• Amplia gama de señalizadores impresos listos para usar• Montaje de tiras para anclaje rápido• Los señalizadores son aptos para todo tipo de
conectores Weidmüller• Se ofrece como tarjetas neutras, en formato MultiCard
o como impresión estándar en tarjetasDatos generales para pedidoTipo Código Versión GTIN (EAN) U.E. DEK 5/5 MCSDR
1609810000 Señalizador de bornes,MultiCard, 5 x 5 mm,Poliamida 66, Color: bajodemanda
4008190456597 200 Pieza
Destornillador de pala plana Destornillador para tornillos de cabeza ranurada con cuña
redonda, SD DIN 5265, ISO 2380/2, accionamientosegún DIN 5264, ISO 2380/1, punta de cromo superior,mango blando SoftFinish
Datos generales para pedidoTipo Código Versión GTIN (EAN) U.E. SDS0.6X3.5X100
9008330000 Destornillador, Anchura decaña (B): 3.5 mm, Longitudde caña: 100 mm, Solidezde caña (A): 0.6 mm
4032248056286 1 Pieza
Desarrollo Desarrollo Desarrollo
SYNCHROFLEX SYNCHROFLEXBRECOFLEX BRECOFLEX BRECOFLEXBRECOM/V BRECOM/V BRECOM/V
T5
DIMENSIONES
Correa dentada de PoliuretanoNORMAS:ISO DIN7721
Nºdientes
Nºdientes
Nºdientes
5
5
1,2 1,2
1,2
2,23,41 1
40º
S S SS S SS SDL DL DLDL DL DLDL DL
ANCHOmm 6 10 3216 5025 75 100180 330
150
1200
540
570
270
1920
840
930
420
2940
1260
39300,0140,016
0,024
0,021
0,0270,077
0,068
0,0860,038
0,034
0,0430,120
0,106
0,1350,060
0,053
0,0670,180
0,147
0,2030,2400,270
Fuerzadetracciónadmisible(N)Peso(Kg/m.)Peso(Kg/m.) DL
Fuerzadetracciónadmisible (N) BRECO-VPeso(Kg/m.)BRECO
DENTADOSIMPLE"S” DENTADODOBLE“DL”
Z
Ø
ZØ
ØMÍNIMOSDEPOLEA Y TENSOR
ContraflexionZmin = 15Ømin = 30mm
FlexionSimpleZmin = 10Ømin = 30mm
SYNCHROFLEX: Correasinfin, suministrablesololosdesarrollosmarcadosenlatablaBRECOFLEX: Correasinfin,suministrablelosdesarrollosmarcadosenlatablaycualquiermedidaentre1075y15000,obsérvesecantidadmínimaparaestas.BRECOV: Correaempalmada,suministrablecualquiernumerodedientes a partirdeldesarrollomarcado:400mm(1000DL)BRECOM:Correasuministrableabierta,longitudmáxima100mt.
FN= Dorsomoldeado FA=Dorsoreforzado
40º
T 5 /100 20T 5 /150 30T 5 /165 33T 5 /180 36T 5 /185 37T 5 /200 40T 5 /210 42T 5 /215 43T 5 /220 44T 5 /225 45T 5 /240 48T 5 /245 49T 5 /250 50T 5 /255 51T 5 /260 52T 5 /270 54T 5 /280 56T 5 /295 59T 5 /300 60T 5 /305 61T 5 /330 66T 5 /340 68T 5 /355 71T 5 /365 73T 5 /370 74T 5 /390 78T 5 /400 80T 5 /410 82T 5 /420 84T 5 /435 87T 5 /455 91T 5 /460 92T 5 /480 96T 5 /500 100T 5 /505 101T 5 /510 102T 5 /515 103T 5 /525 105T 5 /545 109T 5 /550 110T 5 /560 112T 5 /575 115T 5 /590 118T 5 /600FN 120
T 5 /610 122T 5 /615FN 123T 5 /620 124T 5 /625 125T 5 /630 126T 5 /630FA 126T 5 /650 130T 5 /660 132T 5 /660FN 132T 5 /690 138T 5 /690FA 138T 5 /700 140T 5 /720 144T 5 /725 145T 5 /750 150T 5 /755 151T 5 /765 153T 5 /780 156T 5 /800 160T 5 /815 163T 5 /840 168T 5 /860 172T 5 /860FN 172T 5 /900 180T 5 /920 184T 5 /925 185T 5 /940 188T 5 /945 189T 5 /990 198T 5 /1040 208T 5 /1075 215T 5 /1075FA 215T 5 /1100 220T 5 /1140FN 228T 5 /1160 232T 5 /1215 243T 5 /1315 263T 5 /1325 265T 5 /1380 276T 5 /1400 280T 5 /1500 300T 5 /1600 320T 5 /1700 340T 5 /1800 360
T 5 /1900 380T 5 /2000 400T 5 /2120 424T 5 /2240 448T 5 /2360 472T 5 /2500 500T 5 /2650 530T 5 /2800 560T 5 /3000 600T 5 /3150 630T 5 /3350 670T 5 /3550 710T 5 /3750 750T 5 /4000 800T 5 /4250 850T 5 /4500 900T 5 /4750 950T 5 /5000 1000T 5 /5300 1060
400
1000
DINAMICADistribuciones, saBARCELONA-MADRID-BILBAO-OURENSETel. :902198131 - [email protected] - www.dinamica.net
https://www.phoenixcontact.com/us/products/2864082
05/07/2014 Page 1 / 8
Frequency transducer - MINI MCR-SL-UI-F - 2864082Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user'sdocumentation. Our General Terms of Use for Downloads are valid(http://download.phoenixcontact.com)
Analog frequency transducers for converting analog standard signals into frequency signals or PWM signals,configurable via DIP switch, with screw connection
Product descriptionThe 6.2 mm wide configurable analog frequency transducer MINI MCR-SL-UI-F... is used for converting analog standard signals into frequency signalsor into pulse width modulated (PWM) signals. On the input side, there are the analog signals 0...20 mA, 4...20 mA, 0...10 mA, 2...10 mA, 0...10 V, 2...10 V, 0...5 V or 1...5 V The DIP switches are accessible on the side of the housing and allow the following parameters to be configured: – Input signal, – Output signal, – Output behavior in case the measuring range is exceeded or undershot and – Filter type (for eliminating malfunctions in the input signal) Voltage (19.2 V DC to 30 V DC) can be supplied through connection terminal blocks on the modules or in conjunction with the DIN rail connector.
Product Features
Power supply possible via the foot element (T-connector)
Error indication via diagnostic LED and analog signal
PWM output of 5 ... 95 %
Highly-compact analog-to-frequency transducer for electrical isolation, amplification, conversion, and filtering of standard signals to createfrequencies or PWM signals
Input and output signals can be configured via DIP switches
Configurable interference filter
3-way isolation
Key commercial dataPacking unit 1 pc
Weight per Piece (excluding packing) 72.0 GRM
Custom tariff number 85389091
Country of origin Germany
https://www.phoenixcontact.com/us/products/2864082
05/07/2014 Page 2 / 8
Frequency transducer - MINI MCR-SL-UI-F - 2864082
Technical data
Note:
Utilization restriction EMC: class A product, see manufacturer's declaration in the downloadarea
DimensionsWidth 6.2 mm
Height 93.1 mm
Depth 102.5 mm
Ambient conditionsAmbient temperature (operation) -20 °C ... 65 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Degree of protection IP20
Input dataConfigurable/programmable Yes
Current input signal 0 mA ... 20 mA
4 mA ... 20 mA
0 mA ... 10 mA
2 mA ... 10 mA
Input resistance current input approx. 50 Ω
Voltage input signal 0 V ... 5 V
1 V ... 5 V
0 V ... 10 V
2 V ... 10 V
Input resistance of voltage input approx. 110 kΩ
Output dataFrequency output 0 Hz ... 10 kHz
0 Hz ... 5 kHz
0 Hz ... 2.5 kHz
0 Hz ... 1 kHz
0 Hz ... 500 Hz
0 Hz ... 250 Hz
0 Hz ... 100 Hz
0 Hz ... 50 Hz
Load min. 4 mA ≤ (UL / RL) ≤ 20 mA
Output signal PWM 7.8 kHz (10 bit)
3.9 kHz (10 bit)
1.9 kHz (12 bit)
https://www.phoenixcontact.com/us/products/2864082
05/07/2014 Page 3 / 8
Frequency transducer - MINI MCR-SL-UI-F - 2864082Technical data
Output data977 Hz (12 bit)
488 Hz (14 bit)
244 Hz (14 bit)
122 Hz (16 bit)
61 Hz (16 bit)
Load min. 12 mA ≤ (UL / RL) ≤ 20 mA
Maximum switching voltage 30 V
Load current maximum 20 mA
Overrange/underrange Can be set (via DIP switch)
Type of protection Short-circuit protection, polarity reversal protection
Step response (0–99%) < 15 ms (+ (1/f) smallest filter)
< 1 s (+ (1/f) largest filter)
Power supplyNominal supply voltage 24 V DC
Supply voltage range19.2 V DC ... 30 V DC (The T connector (ME 6,2 TBUS-2 1,5/5-ST-3,81GN, Order No. 2869728) can be used to bridge the supply voltage. It canbe snapped onto a 35 mm DIN rail according to EN 60715))
Max. current consumption < 10 mA (at 24 V DC)
Power consumption < 200 mW
Connection dataConnection method Screw connection
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section AWG/kcmil min. 26
Conductor cross section AWG/kcmil max 12
Conductor cross section stranded min. 0.2 mm²
Conductor cross section stranded max. 2.5 mm²
Stripping length 12 mm
Screw thread M3
GeneralMaximum transmission error ≤ 0.1 % (> 7 kHz ≤ 0.2 %)
Maximum temperature coefficient < 0.02 %/K
Electrical isolation Basic insulation according to EN 61010
Surge voltage category II
Pollution degree 2
Rated insulation voltage 50 V AC/DC
https://www.phoenixcontact.com/us/products/2864082
05/07/2014 Page 4 / 8
Frequency transducer - MINI MCR-SL-UI-F - 2864082Technical data
GeneralTest voltage, input/output/supply 1.5 kV (50 Hz, 1 min.)
Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC
Noise emission EN 61000-6-4
Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimaldeviations.
Color green
Housing material PBT
Mounting position any
Conformance CE-compliant
ATEX II 3 G Ex nA IIC T4 Gc X
UL, USA / Canada UL 508 Recognized
Class I, Div. 2, Groups A, B, C, D T5 applied for
GL GL EMC 2 D
EMC dataDesignation Electromagnetic RF field
Standards/regulations EN 61000-4-3
Typical deviation from the measuring range final value 2 %
Designation Fast transients (burst)
Standards/regulations EN 61000-4-4
Typical deviation from the measuring range final value 2 %
Designation Conducted interferences
Standards/regulations EN 61000-4-6
Typical deviation from the measuring range final value 2 %
Classifications
eCl@ss
eCl@ss 4.0 27210120
eCl@ss 4.1 27210120
eCl@ss 5.0 27210120
eCl@ss 5.1 27210120
eCl@ss 6.0 27210120
eCl@ss 7.0 27210120
eCl@ss 8.0 27210120
ETIM
ETIM 2.0 EC001485
https://www.phoenixcontact.com/us/products/2864082
05/07/2014 Page 5 / 8
Frequency transducer - MINI MCR-SL-UI-F - 2864082Classifications
ETIMETIM 3.0 EC001485
ETIM 4.0 EC001485
ETIM 5.0 EC002299
UNSPSC
UNSPSC 6.01 30211506
UNSPSC 7.0901 39121008
UNSPSC 11 39121008
UNSPSC 12.01 39121008
UNSPSC 13.2 39121008
Approvals
Approvals
Approvals
UL Recognized / cUL Recognized / GL / cULus Recognized
Ex Approvals
ATEX
Approvals submitted
Approval details
UL Recognized
cUL Recognized
GL
https://www.phoenixcontact.com/us/products/2864082
05/07/2014 Page 6 / 8
Frequency transducer - MINI MCR-SL-UI-F - 2864082Approvals
cULus Recognized
Accessories
Accessories
DIN rail connector
Electronic housing - ME 6,2 TBUS-2 1,5/5-ST-3,81 GN - 2869728
DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 5-pos.
Marking material
Transparent cover - MINI MCR DKL - 2308111
Fold up transparent cover for MINI MCR modules with additional labeling option using insert strips and flat Zack markerstrip 6.2 mm
Marking label - MINI MCR-DKL-LABEL - 2810272
Label for extended marking of MINI MCR modules in connection with the MINI MCR-DKL
Power module
Power terminal block - MINI MCR-SL-PTB - 2864134
MCR power terminal block for supplying several MINI Analog modules via the T-connector, with screw connection,maximum current consumption of up to 2 A
https://www.phoenixcontact.com/us/products/2864082
05/07/2014 Page 7 / 8
Frequency transducer - MINI MCR-SL-UI-F - 2864082Accessories
Power terminal block - MINI MCR-SL-PTB-SP - 2864147
MCR power terminal block for supplying several MINI Analog modules via the T-connector, with spring-cage connection,maximum current consumption of up to 2 A
Power supply
Power supply unit - MINI-SYS-PS-100-240AC/24DC/1.5 - 2866983
DIN rail power supply unit, primary-switched mode, slim design, output: 24 V DC / 1.5 A
Power supply unit - MINI-PS-100-240AC/24DC/1.5/EX - 2866653
DIN rail power supply unit, primary-switched mode, slim design, output: 24 V DC / 1.5 A, ATEX approval
System adapter
System adapter - MINI MCR-SL-V8-FLK 16-A - 2811268
Eight MINI analog signal converters with screw connection method can be connected to a control system using a systemadapter and system cabling with a minimum of wiring and very low error risk.
Drawings
https://www.phoenixcontact.com/us/products/2864082
05/07/2014 Page 8 / 8
Frequency transducer - MINI MCR-SL-UI-F - 2864082
Block diagram
Zone 2
max. 20mA
INSensor / Field OUT PLC / DCS
4-wire
OUT
U,I
GND
GN
D–
OU
T +
US
5
6
1
2
supply
max. 30VDC
+ –
RL
–
+
–
–
+
+
+
–
+24V+24V
+24VGND 3
GND 3
GND 2
passive
GND 3
GND 1
OUTIN U,I1 5
2 6
7
8
3
4
Diagram
PWM output (pulse width modulation)
Variable pulse-pause ratio / Fixed period duration T
Frequency output
Variable frequency / Period duration T
T T T T T T
T T T T T T
Dimensioned drawing
93,1 6,2
10
2,5
Phoenix Contact 2014 © - all rights reservedhttp://www.phoenixcontact.com
https://www.phoenixcontact.com/us/products/2810243
05/21/2014 Page 1 / 7
Frequency transducer - MINI MCR-SL-UI-F-SP - 2810243Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user'sdocumentation. Our General Terms of Use for Downloads are valid(http://phoenixcontact.com/download)
MCR analog frequency transducers for converting analog standard signals into frequency signals or PWMsignals, with spring-cage connection
The figure shows a version with ascrew connection
Product Features
Power supply possible via the foot element (T-connector)
Error indication via diagnostic LED and analog signal
Highly-compact analog-to-frequency transducer for electrical isolation, amplification, conversion, and filtering of standard signals to createfrequencies or PWM signals
Configurable interference filter
3-way isolation
PWM output of 5 ... 95 %
Input and output signals can be configured via DIP switches
Key commercial dataPacking unit 1 pc
Weight per Piece (excluding packing) 65.4 GRM
Custom tariff number 85389091
Country of origin Germany
Technical data
Note:
Utilization restriction EMC: class A product, see manufacturer's declaration in the downloadarea
Dimensions
https://www.phoenixcontact.com/us/products/2810243
05/21/2014 Page 2 / 7
Frequency transducer - MINI MCR-SL-UI-F-SP - 2810243Technical data
DimensionsWidth 6.2 mm
Height 93.1 mm
Depth 102.5 mm
Ambient conditionsAmbient temperature (operation) -20 °C ... 65 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Degree of protection IP20
Input dataConfigurable/programmable Yes
Current input signal 0 mA ... 20 mA
4 mA ... 20 mA
0 mA ... 10 mA
2 mA ... 10 mA
Input resistance current input approx. 50 Ω
Voltage input signal 0 V ... 5 V
1 V ... 5 V
0 V ... 10 V
2 V ... 10 V
Input resistance of voltage input approx. 110 kΩ
Output dataFrequency output 0 Hz ... 10 kHz
0 Hz ... 5 kHz
0 Hz ... 2.5 kHz
0 Hz ... 1 kHz
0 Hz ... 500 Hz
0 Hz ... 250 Hz
0 Hz ... 100 Hz
0 Hz ... 50 Hz
Load min. 4 mA ≤ (UL / RL) ≤ 20 mA
Output signal PWM 7.8 kHz (10 bit)
3.9 kHz (10 bit)
1.9 kHz (12 bit)
977 Hz (12 bit)
488 Hz (14 bit)
244 Hz (14 bit)
122 Hz (16 bit)
https://www.phoenixcontact.com/us/products/2810243
05/21/2014 Page 3 / 7
Frequency transducer - MINI MCR-SL-UI-F-SP - 2810243Technical data
Output data61 Hz (16 bit)
Load min. 12 mA ≤ (UL / RL) ≤ 20 mA
Maximum switching voltage 30 V
Load current maximum 20 mA
Overrange/underrange Can be set (via DIP switch)
Type of protection Short-circuit protection, polarity reversal protection
Step response (0–99%) < 15 ms (+ (1/f) smallest filter)
< 1 s (+ (1/f) largest filter)
Power supplyNominal supply voltage 24 V DC
Supply voltage range19.2 V DC ... 30 V DC (The T connector (ME 6,2 TBUS-2 1,5/5-ST-3,81GN, Order No. 2869728) can be used to bridge the supply voltage. It canbe snapped onto a 35 mm DIN rail according to EN 60715))
Max. current consumption < 10 mA (at 24 V DC)
Power consumption < 200 mW
Connection dataConnection method Spring-cage connection
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section AWG/kcmil min. 24
Conductor cross section AWG/kcmil max 12
Conductor cross section stranded min. 0.2 mm²
Conductor cross section stranded max. 2.5 mm²
Stripping length 8 mm
GeneralMaximum transmission error ≤ 0.1 % (> 7 kHz ≤ 0.2 %)
Maximum temperature coefficient < 0.02 %/K
Electrical isolation Basic insulation according to EN 61010
Surge voltage category II
Pollution degree 2
Rated insulation voltage 50 V AC/DC
Test voltage, input/output/supply 1.5 kV (50 Hz, 1 min.)
Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC
Noise emission EN 61000-6-4
Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimaldeviations.
Color green
https://www.phoenixcontact.com/us/products/2810243
05/21/2014 Page 4 / 7
Frequency transducer - MINI MCR-SL-UI-F-SP - 2810243Technical data
GeneralHousing material PBT
Mounting position any
Conformance CE-compliant
ATEX II 3 G Ex nA IIC T4 Gc X
UL, USA / Canada UL 508 Recognized
Class I, Div. 2, Groups A, B, C, D T5 applied for
GL GL EMC 2 D
EMC dataDesignation Electromagnetic RF field
Standards/regulations EN 61000-4-3
Typical deviation from the measuring range final value 2 %
Designation Fast transients (burst)
Standards/regulations EN 61000-4-4
Typical deviation from the measuring range final value 2 %
Designation Conducted interferences
Standards/regulations EN 61000-4-6
Typical deviation from the measuring range final value 2 %
Classifications
eCl@ss
eCl@ss 4.0 27210120
eCl@ss 4.1 27210120
eCl@ss 5.0 27210120
eCl@ss 5.1 27210120
eCl@ss 6.0 27210120
eCl@ss 7.0 27210120
eCl@ss 8.0 27210120
ETIM
ETIM 2.0 EC001485
ETIM 3.0 EC001485
ETIM 4.0 EC001485
ETIM 5.0 EC002299
UNSPSC
UNSPSC 6.01 30211506
https://www.phoenixcontact.com/us/products/2810243
05/21/2014 Page 5 / 7
Frequency transducer - MINI MCR-SL-UI-F-SP - 2810243Classifications
UNSPSCUNSPSC 7.0901 39121008
UNSPSC 11 39121008
UNSPSC 12.01 39121008
UNSPSC 13.2 39121008
Approvals
Approvals
Approvals
UL Recognized / cUL Recognized / GL / cULus Recognized
Ex Approvals
ATEX
Approvals submitted
Approval details
UL Recognized
cUL Recognized
GL
cULus Recognized
Accessories
Accessories
DIN rail connector
https://www.phoenixcontact.com/us/products/2810243
05/21/2014 Page 6 / 7
Frequency transducer - MINI MCR-SL-UI-F-SP - 2810243Accessories
Electronic housing - ME 6,2 TBUS-2 1,5/5-ST-3,81 GN - 2869728
DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 5-pos.
Power module
Power terminal block - MINI MCR-SL-PTB - 2864134
MCR power terminal block for supplying several MINI Analog modules via the T-connector, with screw connection,maximum current consumption of up to 2 A
Power terminal block - MINI MCR-SL-PTB-SP - 2864147
MCR power terminal block for supplying several MINI Analog modules via the T-connector, with spring-cage connection,maximum current consumption of up to 2 A
Power supply
Power supply unit - MINI-SYS-PS-100-240AC/24DC/1.5 - 2866983
DIN rail power supply unit, primary-switched mode, slim design, output: 24 V DC / 1.5 A
Power supply unit - MINI-PS-100-240AC/24DC/1.5/EX - 2866653
DIN rail power supply unit, primary-switched mode, slim design, output: 24 V DC / 1.5 A, ATEX approval
https://www.phoenixcontact.com/us/products/2810243
05/21/2014 Page 7 / 7
Frequency transducer - MINI MCR-SL-UI-F-SP - 2810243Accessories
Drawings
Block diagram
Zone 2
max. 20mA
INSensor / Field OUT PLC / DCS
4-wire
OUT
U,I
GND
GN
D–
OU
T +
US
5
6
1
2
supply
max. 30VDC
+ –
RL
–
+
–
–
+
+
+
–
+24V+24V
+24VGND 3
GND 3
GND 2
passive
GND 3
GND 1
OUTIN U,I1 5
2 6
7
8
3
4
Diagram
PWM output (pulse width modulation)
Variable pulse-pause ratio / Fixed period duration T
Frequency output
Variable frequency / Period duration T
T T T T T T
T T T T T T
Phoenix Contact 2014 © - all rights reservedhttp://www.phoenixcontact.com
4.65
Marcación de Conductores < 0,75 mm2: Código de colores según 47100.
conductores Conductores ≥ 0,75 mm2: Conductor negro con cifras impresas en blanco, un hilo
verde-amarillo.
CF9.02.03.INI: marrón, azul, negro
CF9.03.04.INI: marrón, azul, negro, blanco
CF9.03.05.INI: marrón, azul, negro, blanco, verde-amarillo
CF9.03.16.07.03.INI:
(0,75mm2): azul, verde-amarillo, marrón
(0,34mm2): violeta, rojo, gris, rojo azul, verde, gris rosa, blanco verde,
blanco-amarillo, blanco gris, negro, amarillo marrón , marrón
verde, blanco, amarillo, rosa, gris marrón
Revestimiento exterior Mezcla sobre la base de TPE altamente resistente a la flexión, especialmente resistente
a la abrasión, de baja adherencia adaptada a las exigencias de las cadenas portacables.
Color: azul oscuro (comparable al RAL 5011)
VDE Los conductores están fabricados siguiendo las normas VDE.
CE Conforme a 2006/95/EG
Sin plomo En concordancia con la directiva UE (RoHS) 2002/95/CE.
Campos de aplicación típicos para las más altas exigencias
resistencia al aceite prácticamente ilimitada, incluso con aceites biodegradables
ámbito Interiores y Exteriores, resistente a la radiación ultravioleta
especialmente para trayectos de desplazamiento suspendidos y deslizantes de hasta 400 m y más
almacenes automatizados, máquinas-herramienta y centros de mecanizado, manipulación rápida, salas blancas,
dotación de semiconductores, ship to shore, grúas de exterior, aplicaciones a bajas temperaturas
RoHS
CF9TPE
5 x d
Ch
ain
flex
®Te
l. +
34 9
36 4
73 9
50F
ax+
34 9
36 4
73 9
51
tipos en almacén sin costes de corte...(para un máximo de 10 cortes del mismo tipo)
Indice de precios
www.igus.es/es/CF9
Chainflex® CF9 en aplicaciones grúa portuaria.
E-CF MULTI 09-07.qxd 10.09.2007 12:47 Uhr Seite 4.65
...sin pedidos mínimos 750 Descarga de eplan, PDF y cálculo de la vida útil de cables Chainflex®
CF9.03.16.07.03.INI 4 x 4 x 0,34 + 3 x 0,75 11,0 74 159
CF9.02.02 2 x 0,25 4,0 5 18
CF9.02.03.INI 3 x 0,25 4,5 8 20
CF9.02.06 6 x 0,25 5,5 15 35
CF9.02.07 7 x 0,25 6,0 17 42
CF9.02.08 8 x 0,25 6,5 20 46
CF9.02.12 12 x 0,25 8,0 29 70
CF9.02.18* 18 x 0,25 9,5 44 98
CF9.03.04.INI 4 x 0,34 5,0 13 31
CF9.03.05.INI 5 x 0,34 5,5 17 37
CF9.03.06 6 x 0,34 6,0 20 43
CF9.03.08 8 x 0,34 6,5 26 55
CF9.05.02 2 x 0,5 5,0 10 31
CF9.05.03 3 x 0,5 5,5 15 32
CF9.05.04 4 x 0,5 5,5 20 36
CF9.05.05 5 x 0,5 6,0 24 46
CF9.05.07 7 x 0,5 7,0 34 78
CF9.05.12 12 x 0,5 9,5 58 105
CF9.05.18 18 x 0,5 12,5 86 165
CF9.05.25 25 x 0,5 13,5 120 201
CF9.05.36 36 x 0,5 17,5 173 368
CF9.07.05 5 G 0,75 6,5 36 58
CF9.07.07 7 G 0,75 7,0 50 76
CF9.07.12 12 G 0,75 11,0 86 142
CF9.07.20 20 G 0,75 13,0 144 231
CF9.07.25 25 G 0,75 14,5 180 320
CF9.10.03 3 G 1,0 6,0 29 49
CF9.10.04 4 G 1,0 6,5 38 56
CF9.10.05 5 G 1,0 7,0 48 70
CF9.10.12 12 G 1,0 11,5 115 181
CF9.10.18 18 G 1,0 14,0 173 267
CF9.10.25 25 G 1,0 17,0 241 329
CF9.15.04 4 G 1,5 7,5 58 86
CF9.15.05 5 G 1,5 8,0 72 110
CF9.15.07 7 G 1,5 9,5 101 140
CF9.15.12 12 G 1,5 14,0 173 265
CF9.15.18 18 G 1,5 17,0 260 400
CF9.15.25 25 G 1,5 20,0 360 602Nota: Los diámetros exteriores indicados son valores máximos y pueden presentar cierta tolerancia hacia abajo.* Plazo de entrega bajo demanda. G = con conductor tierra verde-amarillo x = sin conductor tierra
Programa de suministro
N° Art.
Numero de hilos
y sección del
conductor en mm2
Diámetro
ext. en mm
Coeficiente
de cobre
kg/km
Peso
kg/km
Cable de mando de TPECF9TPE
5 x d
Pre
miu
m L
ine
4.66
Chainflex® CF9l para las más altas exigenciasl revestimiento exterior de TPEl resistente al aceitel resistente al aceite biodegradablel libre de PVC y halógenosl flexible en bajas temperaturas
RoHS
E-CF MULTI 09-07.qxd 10.09.2007 12:47 Uhr Seite 4.66
4.67
Indice de precios
CF9.25.04 4 G 2,5 9,0 96 128
CF9.25.05 5 G 2,5 10,0 120 174
CF9.25.07 7 G 2,5 12,0 168 301
CF9.25.12 12 G 2,5 17,0 288 468
CF9.25.16 16 G 2,5 21,0 384 600
CF9.25.18* 18 G 2,5 24,0 432 827
CF9.25.25 25 G 2,5 24,5 600 990
CF9.40.04 4 G 4,0 10,0 154 195
CF9.60.04 4 G 6,0 12,5 230 310
CF9.60.05 5 G 6,0 14,0 288 400
CF9.100.04** 4 G 10,0 15,5 384 515
CF9.160.04** 4 G 16,0 20,0 614 780
CF9.350.04** 4 G 35,0 26,0 1344 1700
Nota: Los diámetros exteriores indicados son valores máximos y pueden presentar cierta tolerancia hacia abajo.* Tensión nominal 600/1000 V ** Tensión nominal 450/750 VG = con conductor tierra verde-amarillo x = sin conductor tierra
Ch
ain
flex
®Te
l. +
34 9
36 4
73 9
50F
ax+
34 9
36 4
73 9
51
tipos en almacén sin costes de corte...(para un máximo de 10 cortes del mismo tipo)
Programa de suministro
N° Art.
Numero de hilos
y sección del
conductor en mm2
Diámetro
ext. en mm
Coeficiente
de cobre
kg/km
Peso
kg/km
CF9 para exigencias máximas en aplicaciones tanto en el interior como en el exterior.
CF9TPE
5 x d
www.igus.es/es/CF9
E-CF MULTI 09-07.qxd 10.09.2007 12:47 Uhr Seite 4.67
FX2N-2DA SPECIAL FUNCTIONBLOCK
USER’S GUIDE
JY992D74901B
This manual contains text, diagrams and explanations which will guide the reader in the correct installationand operation of the FX2N-2DA special function block and should be read and understood before attempt-ing to install or use the unit.Further information can be found in the FX SERIES PROGRAMMING MANUAL,FX2N SERIES HARD-WARE MANUAL.
1. INTRODUCTION
The FX2N-2DA type analog output block (Hereafter referred to as the FX2N-2DA) is used to convert a digi-tal value of 12 bits into an analog output of two points (voltage output and current output), and to forwardthe values to the Programmable controller (Hereafter referred to as a PLC). FX2N-2DA can be connected with FX0N, FX2N, and the FX2NC series Programmable controllers.
1) The analog out put is selected from the voltage output or the current output by the method of connect-ing wires.At this time, assume setting to be two channels common analog output.
2) The two analog output channels can accept output of 0 to 10V DC, 0 to 5V DC, or 4 to 20mA. (The mixture use for the voltage output/the current output is possible.)
3) Resolution is 2.5mV (0 to 10V DC) and 4µA(4 to 20mA).
4) The digital to analog conversion characteristics can be adjusted.
5) The block occupies 8 I/O points which can be allocated from either inputs or outputs.
6) The data transfer with the PLC uses the FROM/TO instruction.
2. EXTERNAL DIMENSIONS AND PARTS
Dimensions:mm (inches)
DIN railmountingslot35mm(1.38)
Mountingholes2holes4.5(0.18)dia
Extensioncable
43(1.69)
80
(3.1
5)
87(3.43)
9(0.35) 4(0.16)
90
(3.5
4)
M3(0.12)terminal screws
OFF SET/GAINvolumeWeight:0.2kg Accessories:Exchange number label
3. WIRING
*1 Connect a 0.1 to 0.47 µF 25V DC capacitor with the position of *1 when there is voltage ripple in the voltage output or there will be a lot of noise.
*2 For voltage output please short circuit IOUT and COM as shown in the diagram.
*1VO UTIO UTCO M
VO UTIO UTCO M
Extensioncable
PLC DC/DCconverter
+15V
-15V
AG
Inverteretc
Recorderetc
*3
Current output
Vo ltage output
FX2N-2DA
*3 Channel num ber enter
*2
4. Connection with Programmable controller
1) The number of FX2N-2DA which can be connected is 4 or less in the FX0N series PLC, 8 or less in theFX2N series PLC, and 4 or less in the FX2NC series PLC per Main unit with powered extension units.However the following limitation exists when undermentiond special function blocks are connected.
FX2N :Main unit and powered extension units of I/O 32points or less. 24V DC consumption current total value of undermentioned special function blocks used ≤ 190mA
FX2N :Main unit and powered extension units of I/O 48points or more. 24V DC consumption current total value of undermentioned special function blocks used ≤ 300mA
FX2NC:The undermentiond special function blocks can be connected up to 4 regardless of the I/O numberof Main units.
FX0N :The undermentioned special function blocks can be connected up to 2 regardless of the I/O num-ber of Main units and powered extension units.
FX2N-2DA FX2N-2AD FX0N-3A
Consumption current of 24V DC for one 85mA 50mA 90mA
The capacity of DC 24V power supply which can used for extension blocks of the service power sup-ply and I/O reaches the value by which the total value of the consumption current of the above men-tioned special function block is subtracted from a service voltage source capacity the programmablecontroller original. For instance, the service power supply the FX2N-32MT is 250mA. When two FX2N-2DA blocks are connected, the service power supply is reduced to 80mA.
2) The blocks occupy 8 points (The 8 points can be allocated from either inputs or outputs).
3) FX2N-2DA consumes 5V DC 30mA.The total of 5V of the special function block connected with the main unit of the PLC consumption cur-rent must not exceed 5V voltage source capacity of the main unit and the powered extension unit.
4) The FX2N-2DA and the main unit are connected with the cable at the right of the main unit.
72 4 5 61 30
1611 1514 1710 12 13
14 171510 12 13
72 4 5 61 30
1611
OUT
IN
L X13 X15X10 X14 X16
24+NCOM X4
X7
Y4Y5
Y6COM3
Y10Y11
Y12Y13Y1
Y2Y3
Y14Y15
X3X2
X1
POWER
BATT.V
RUN
CPU.E
PROG.E
FX2N-32MR FX2N-2DA FX2N-16EX FX2N-2DA FX2N-32ER FX2N-2DA
POWER
2NFX -2DA
POWER
2NFX -2DA
POWER
2NFX -2DA
1IN 0
7
23456
POWER
1IN 0
7
23456
X0X5
72 4 5 61 30
72 4 5 61 30
OUT
IN
L X1 X3 X5 X7X6 X0 X2 X4 X6
24+NCOM X4
X7
COM4COM2Y4
Y5Y6
Y7 COM3Y0
Y1Y2
Y3COM1Y0
Y1Y2
Y3Y4
Y5Y6
Y7
X3X2
X1
POWER
0 1 2 3 4 5 6 7
76543210
5. SPECIFICATIONS
5.1 Environment specification
Environmental specifications other than the above-mentioned are the same as the main unit of the Programmable controller. (Refer to the manual of the Programmable controller)
5.2 Power supply specification and others
Item Content
Directric Withstand voltage
500V AC 1min(Between analog output terminals and case)
Item Content
Analog circuits 24V DC ±10% 85mA (Internal power supplied from the main unit)
Digital circuits 5V DC 30mA (Internal power supplied from main unit)
5.3 Defining gain and offset
IsolationPhoto-coupler isolation between analog and digital circuits. DC/DC converter isolation of power from main unit.(No isolation between analog channels.)
Number of occupiedI/O points
The blocks occupy either 8 input or output points. (can be either inputs or outputs)
Item Voltage output Current output
Range of analog output
At shipping, the unit is adjusted to a digital range of 0 to 4000 for an analog voltage output of 0 to 10V DC. When using FX2N-2DA by the current input or the 0 to 5V DC output, it is necessary to readjust by the offset and gain vol-umes.
0 to 10V DC, 0 to 5V DC (External load resistance 2K to 1MΩ)
4 to 20mA (External load resistance 500Ω or less)
Item Content
Digital input 12bit
Resolution 2.5mV(10V/4000) 1.25mV(5V/4000) 4µA (20-4)/4000
Integrated accuracy ±1% (full scale 0 to 10V) ±1% (full scale 4 to 20mA)
Processing time 4ms/1 channel (sequence program and synchronization)
Item Voltage output Current output
output characteristics
Only subordinate position 12bit becomes effective when the data of 13bit or more is input, and high rank bit any more is disregarded. Use a digital value within the range from 0 to 4095.The output characteristic can be set to each two channels.
Item Voltage output Current output
Digital value0 4000
10V
Analogue valueDigital value
Offset value is fixation
:0 to 10V:0 to 4000
Ana
logu
eva
lue
10.238V
4095
Ana
logu
eva
lue
Digital value0 4000
20mA
4mA
Analogue valueDigital value
:4 to 20mA:0 to 4000
20.380mA
4095
6. Allocation of buffer memory (BFM)
6.1 Buffer memory
BFMnumber
b15 to b8 b7 to b3 b2 b1 b0
#0 to #15 Reserved
#16 Reserved Current value of output data(8 bit)
#17 ReservedD/A subordinate position data hold-ing
CH1 D/A conver-sion beginning
CH2 D/A conver-sion beginning
#18 or more Reserved
BFM#16:The D/A conversion data of the channel specified with BFM#17 (digital value) is written. The D/A data is written in the binary in order of subordinate position 8bit and high rank 4bit,divided into two portions.
BFM#17:b0•••The D/A conversion of CH2 begins by changing of 1→0. b1•••The D/A conversion of CH1 begins by changing of 1→0. b2•••The subordinate position eight bit data for the D/A conversion is held by changing of 1→0.
Write data in above-mentioned buffer memory by "8.Program example".
FX2N-2DA SPECIAL FUNCTIONBLOCK
USER’S GUIDE
JY992D74901B
This manual contains text, diagrams and explanations which will guide the reader in the correct installationand operation of the FX2N-2DA special function block and should be read and understood before attempt-ing to install or use the unit.Further information can be found in the FX SERIES PROGRAMMING MANUAL,FX2N SERIES HARD-WARE MANUAL.
1. INTRODUCTION
The FX2N-2DA type analog output block (Hereafter referred to as the FX2N-2DA) is used to convert a digi-tal value of 12 bits into an analog output of two points (voltage output and current output), and to forwardthe values to the Programmable controller (Hereafter referred to as a PLC). FX2N-2DA can be connected with FX0N, FX2N, and the FX2NC series Programmable controllers.
1) The analog out put is selected from the voltage output or the current output by the method of connect-ing wires.At this time, assume setting to be two channels common analog output.
2) The two analog output channels can accept output of 0 to 10V DC, 0 to 5V DC, or 4 to 20mA. (The mixture use for the voltage output/the current output is possible.)
3) Resolution is 2.5mV (0 to 10V DC) and 4µA(4 to 20mA).
4) The digital to analog conversion characteristics can be adjusted.
5) The block occupies 8 I/O points which can be allocated from either inputs or outputs.
6) The data transfer with the PLC uses the FROM/TO instruction.
2. EXTERNAL DIMENSIONS AND PARTS
Dimensions:mm (inches)
DIN railmountingslot35mm(1.38)
Mountingholes2holes4.5(0.18)dia
Extensioncable
43(1.69)
80
(3.1
5)
87(3.43)
9(0.35) 4(0.16)
90
(3.5
4)
M3(0.12)terminal screws
OFF SET/GAINvolumeWeight:0.2kg Accessories:Exchange number label
3. WIRING
*1 Connect a 0.1 to 0.47 µF 25V DC capacitor with the position of *1 when there is voltage ripple in the voltage output or there will be a lot of noise.
*2 For voltage output please short circuit IOUT and COM as shown in the diagram.
*1VO UTIO UTCO M
VO UTIO UTCO M
Extensioncable
PLC DC/DCconverter
+15V
-15V
AG
Inverteretc
Recorderetc
*3
Current output
Vo ltage output
FX2N-2DA
*3 Channel num ber enter
*2
4. Connection with Programmable controller
1) The number of FX2N-2DA which can be connected is 4 or less in the FX0N series PLC, 8 or less in theFX2N series PLC, and 4 or less in the FX2NC series PLC per Main unit with powered extension units.However the following limitation exists when undermentiond special function blocks are connected.
FX2N :Main unit and powered extension units of I/O 32points or less. 24V DC consumption current total value of undermentioned special function blocks used ≤ 190mA
FX2N :Main unit and powered extension units of I/O 48points or more. 24V DC consumption current total value of undermentioned special function blocks used ≤ 300mA
FX2NC:The undermentiond special function blocks can be connected up to 4 regardless of the I/O numberof Main units.
FX0N :The undermentioned special function blocks can be connected up to 2 regardless of the I/O num-ber of Main units and powered extension units.
FX2N-2DA FX2N-2AD FX0N-3A
Consumption current of 24V DC for one 85mA 50mA 90mA
The capacity of DC 24V power supply which can used for extension blocks of the service power sup-ply and I/O reaches the value by which the total value of the consumption current of the above men-tioned special function block is subtracted from a service voltage source capacity the programmablecontroller original. For instance, the service power supply the FX2N-32MT is 250mA. When two FX2N-2DA blocks are connected, the service power supply is reduced to 80mA.
2) The blocks occupy 8 points (The 8 points can be allocated from either inputs or outputs).
3) FX2N-2DA consumes 5V DC 30mA.The total of 5V of the special function block connected with the main unit of the PLC consumption cur-rent must not exceed 5V voltage source capacity of the main unit and the powered extension unit.
4) The FX2N-2DA and the main unit are connected with the cable at the right of the main unit.
72 4 5 61 30
1611 1514 1710 12 13
14 171510 12 13
72 4 5 61 30
1611
OUT
IN
L X13 X15X10 X14 X16
24+NCOM X4
X7
Y4Y5
Y6COM3
Y10Y11
Y12Y13Y1
Y2Y3
Y14Y15
X3X2
X1
POWER
BATT.V
RUN
CPU.E
PROG.E
FX2N-32MR FX2N-2DA FX2N-16EX FX2N-2DA FX2N-32ER FX2N-2DA
POWER
2NFX -2DA
POWER
2NFX -2DA
POWER
2NFX -2DA
1IN 0
7
23456
POWER
1IN 0
7
23456
X0X5
72 4 5 61 30
72 4 5 61 30
OUT
IN
L X1 X3 X5 X7X6 X0 X2 X4 X6
24+NCOM X4
X7
COM4COM2Y4
Y5Y6
Y7 COM3Y0
Y1Y2
Y3COM1Y0
Y1Y2
Y3Y4
Y5Y6
Y7
X3X2
X1
POWER
0 1 2 3 4 5 6 7
76543210
5. SPECIFICATIONS
5.1 Environment specification
Environmental specifications other than the above-mentioned are the same as the main unit of the Programmable controller. (Refer to the manual of the Programmable controller)
5.2 Power supply specification and others
Item Content
Directric Withstand voltage
500V AC 1min(Between analog output terminals and case)
Item Content
Analog circuits 24V DC ±10% 85mA (Internal power supplied from the main unit)
Digital circuits 5V DC 30mA (Internal power supplied from main unit)
5.3 Defining gain and offset
IsolationPhoto-coupler isolation between analog and digital circuits. DC/DC converter isolation of power from main unit.(No isolation between analog channels.)
Number of occupiedI/O points
The blocks occupy either 8 input or output points. (can be either inputs or outputs)
Item Voltage output Current output
Range of analog output
At shipping, the unit is adjusted to a digital range of 0 to 4000 for an analog voltage output of 0 to 10V DC. When using FX2N-2DA by the current input or the 0 to 5V DC output, it is necessary to readjust by the offset and gain vol-umes.
0 to 10V DC, 0 to 5V DC (External load resistance 2K to 1MΩ)
4 to 20mA (External load resistance 500Ω or less)
Item Content
Digital input 12bit
Resolution 2.5mV(10V/4000) 1.25mV(5V/4000) 4µA (20-4)/4000
Integrated accuracy ±1% (full scale 0 to 10V) ±1% (full scale 4 to 20mA)
Processing time 4ms/1 channel (sequence program and synchronization)
Item Voltage output Current output
output characteristics
Only subordinate position 12bit becomes effective when the data of 13bit or more is input, and high rank bit any more is disregarded. Use a digital value within the range from 0 to 4095.The output characteristic can be set to each two channels.
Item Voltage output Current output
Digital value0 4000
10V
Analogue valueDigital value
Offset value is fixation
:0 to 10V:0 to 4000
Ana
logu
eva
lue
10.238V
4095
Ana
logu
eva
lue
Digital value0 4000
20mA
4mA
Analogue valueDigital value
:4 to 20mA:0 to 4000
20.380mA
4095
6. Allocation of buffer memory (BFM)
6.1 Buffer memory
BFMnumber
b15 to b8 b7 to b3 b2 b1 b0
#0 to #15 Reserved
#16 Reserved Current value of output data(8 bit)
#17 ReservedD/A subordinate position data hold-ing
CH1 D/A conver-sion beginning
CH2 D/A conver-sion beginning
#18 or more Reserved
BFM#16:The D/A conversion data of the channel specified with BFM#17 (digital value) is written. The D/A data is written in the binary in order of subordinate position 8bit and high rank 4bit,divided into two portions.
BFM#17:b0•••The D/A conversion of CH2 begins by changing of 1→0. b1•••The D/A conversion of CH1 begins by changing of 1→0. b2•••The subordinate position eight bit data for the D/A conversion is held by changing of 1→0.
Write data in above-mentioned buffer memory by "8.Program example".
FX2N-2DA SPECIAL FUNCTIONBLOCK
USER’S GUIDE
JY992D74901B
This manual contains text, diagrams and explanations which will guide the reader in the correct installationand operation of the FX2N-2DA special function block and should be read and understood before attempt-ing to install or use the unit.Further information can be found in the FX SERIES PROGRAMMING MANUAL,FX2N SERIES HARD-WARE MANUAL.
1. INTRODUCTION
The FX2N-2DA type analog output block (Hereafter referred to as the FX2N-2DA) is used to convert a digi-tal value of 12 bits into an analog output of two points (voltage output and current output), and to forwardthe values to the Programmable controller (Hereafter referred to as a PLC). FX2N-2DA can be connected with FX0N, FX2N, and the FX2NC series Programmable controllers.
1) The analog out put is selected from the voltage output or the current output by the method of connect-ing wires.At this time, assume setting to be two channels common analog output.
2) The two analog output channels can accept output of 0 to 10V DC, 0 to 5V DC, or 4 to 20mA. (The mixture use for the voltage output/the current output is possible.)
3) Resolution is 2.5mV (0 to 10V DC) and 4µA(4 to 20mA).
4) The digital to analog conversion characteristics can be adjusted.
5) The block occupies 8 I/O points which can be allocated from either inputs or outputs.
6) The data transfer with the PLC uses the FROM/TO instruction.
2. EXTERNAL DIMENSIONS AND PARTS
Dimensions:mm (inches)
DIN railmountingslot35mm(1.38)
Mountingholes2holes4.5(0.18)dia
Extensioncable
43(1.69)
80
(3.1
5)
87(3.43)
9(0.35) 4(0.16)
90
(3.5
4)
M3(0.12)terminal screws
OFF SET/GAINvolumeWeight:0.2kg Accessories:Exchange number label
3. WIRING
*1 Connect a 0.1 to 0.47 µF 25V DC capacitor with the position of *1 when there is voltage ripple in the voltage output or there will be a lot of noise.
*2 For voltage output please short circuit IOUT and COM as shown in the diagram.
*1VO UTIO UTCO M
VO UTIO UTCO M
Extensioncable
PLC DC/DCconverter
+15V
-15V
AG
Inverteretc
Recorderetc
*3
Current output
Vo ltage output
FX2N-2DA
*3 Channel num ber enter
*2
4. Connection with Programmable controller
1) The number of FX2N-2DA which can be connected is 4 or less in the FX0N series PLC, 8 or less in theFX2N series PLC, and 4 or less in the FX2NC series PLC per Main unit with powered extension units.However the following limitation exists when undermentiond special function blocks are connected.
FX2N :Main unit and powered extension units of I/O 32points or less. 24V DC consumption current total value of undermentioned special function blocks used ≤ 190mA
FX2N :Main unit and powered extension units of I/O 48points or more. 24V DC consumption current total value of undermentioned special function blocks used ≤ 300mA
FX2NC:The undermentiond special function blocks can be connected up to 4 regardless of the I/O numberof Main units.
FX0N :The undermentioned special function blocks can be connected up to 2 regardless of the I/O num-ber of Main units and powered extension units.
FX2N-2DA FX2N-2AD FX0N-3A
Consumption current of 24V DC for one 85mA 50mA 90mA
The capacity of DC 24V power supply which can used for extension blocks of the service power sup-ply and I/O reaches the value by which the total value of the consumption current of the above men-tioned special function block is subtracted from a service voltage source capacity the programmablecontroller original. For instance, the service power supply the FX2N-32MT is 250mA. When two FX2N-2DA blocks are connected, the service power supply is reduced to 80mA.
2) The blocks occupy 8 points (The 8 points can be allocated from either inputs or outputs).
3) FX2N-2DA consumes 5V DC 30mA.The total of 5V of the special function block connected with the main unit of the PLC consumption cur-rent must not exceed 5V voltage source capacity of the main unit and the powered extension unit.
4) The FX2N-2DA and the main unit are connected with the cable at the right of the main unit.
72 4 5 61 30
1611 1514 1710 12 13
14 171510 12 13
72 4 5 61 30
1611
OUT
IN
L X13 X15X10 X14 X16
24+NCOM X4
X7
Y4Y5
Y6COM3
Y10Y11
Y12Y13Y1
Y2Y3
Y14Y15
X3X2
X1
POWER
BATT.V
RUN
CPU.E
PROG.E
FX2N-32MR FX2N-2DA FX2N-16EX FX2N-2DA FX2N-32ER FX2N-2DA
POWER
2NFX -2DA
POWER
2NFX -2DA
POWER
2NFX -2DA
1IN 0
7
23456
POWER
1IN 0
7
23456
X0X5
72 4 5 61 30
72 4 5 61 30
OUT
IN
L X1 X3 X5 X7X6 X0 X2 X4 X6
24+NCOM X4
X7
COM4COM2Y4
Y5Y6
Y7 COM3Y0
Y1Y2
Y3COM1Y0
Y1Y2
Y3Y4
Y5Y6
Y7
X3X2
X1
POWER
0 1 2 3 4 5 6 7
76543210
5. SPECIFICATIONS
5.1 Environment specification
Environmental specifications other than the above-mentioned are the same as the main unit of the Programmable controller. (Refer to the manual of the Programmable controller)
5.2 Power supply specification and others
Item Content
Directric Withstand voltage
500V AC 1min(Between analog output terminals and case)
Item Content
Analog circuits 24V DC ±10% 85mA (Internal power supplied from the main unit)
Digital circuits 5V DC 30mA (Internal power supplied from main unit)
5.3 Defining gain and offset
IsolationPhoto-coupler isolation between analog and digital circuits. DC/DC converter isolation of power from main unit.(No isolation between analog channels.)
Number of occupiedI/O points
The blocks occupy either 8 input or output points. (can be either inputs or outputs)
Item Voltage output Current output
Range of analog output
At shipping, the unit is adjusted to a digital range of 0 to 4000 for an analog voltage output of 0 to 10V DC. When using FX2N-2DA by the current input or the 0 to 5V DC output, it is necessary to readjust by the offset and gain vol-umes.
0 to 10V DC, 0 to 5V DC (External load resistance 2K to 1MΩ)
4 to 20mA (External load resistance 500Ω or less)
Item Content
Digital input 12bit
Resolution 2.5mV(10V/4000) 1.25mV(5V/4000) 4µA (20-4)/4000
Integrated accuracy ±1% (full scale 0 to 10V) ±1% (full scale 4 to 20mA)
Processing time 4ms/1 channel (sequence program and synchronization)
Item Voltage output Current output
output characteristics
Only subordinate position 12bit becomes effective when the data of 13bit or more is input, and high rank bit any more is disregarded. Use a digital value within the range from 0 to 4095.The output characteristic can be set to each two channels.
Item Voltage output Current output
Digital value0 4000
10V
Analogue valueDigital value
Offset value is fixation
:0 to 10V:0 to 4000
Ana
logu
eva
lue
10.238V
4095
Ana
logu
eva
lue
Digital value0 4000
20mA
4mA
Analogue valueDigital value
:4 to 20mA:0 to 4000
20.380mA
4095
6. Allocation of buffer memory (BFM)
6.1 Buffer memory
BFMnumber
b15 to b8 b7 to b3 b2 b1 b0
#0 to #15 Reserved
#16 Reserved Current value of output data(8 bit)
#17 ReservedD/A subordinate position data hold-ing
CH1 D/A conver-sion beginning
CH2 D/A conver-sion beginning
#18 or more Reserved
BFM#16:The D/A conversion data of the channel specified with BFM#17 (digital value) is written. The D/A data is written in the binary in order of subordinate position 8bit and high rank 4bit,divided into two portions.
BFM#17:b0•••The D/A conversion of CH2 begins by changing of 1→0. b1•••The D/A conversion of CH1 begins by changing of 1→0. b2•••The subordinate position eight bit data for the D/A conversion is held by changing of 1→0.
Write data in above-mentioned buffer memory by "8.Program example".
HEAD OFFICE : MITSUBISHI DENKI BLDG MARUNOUTI TOKYO 100-8310 TELEX : J24532 CABLE MELCO TOKYOHIMEJI WORKS : 840, CHIYODA CHO, HIMEJI, JAPAN
7. Adjustment of offset and gain
7.1 offset and gain
The offset value and the gain value when the factory is shipped are adjusted for a digital value to become 0to 4000 for the voltage output 0 to 10V. It is necessary to readjust the offset value and the gain value whenFX2N-2DA is used by the current output, and FX2N-2DA is used by the output characteristics other thanshipping the factory. The adjustment of the offset value and the gain value sets a digital value to the ana-logue value actually output by using the Voltmeter and the Ammeter according to the volume of FX2N-2DA.
*1 A digital value increases if the volume installed in FX2N-2DA is turned right (clockwise).
A+
-
VOUT
IOUT
COM
FX2N-2DA
AmmeterV+
-
VOUT
IOUT
COM
FX2N-2DA
VoltmeterPOWER
CO
M2
IOU
T1
VO
UT
1IO
UT2
VO
UT2
CO
M1
CH1OFFSET
OFFSETCH2GAIN
CH1
CH2GAIN
OFFSETCH1
CO
M2
POWER
OFFSETCH2
GAINCH1
CH2GAIN
CH1Offset volume
CH1Gain volume
CH2Offset volume
CH2Gain volume
OU
T2
Voltage output Current output Volume *1
7.1.1 Adjustment of gain
The gain value can be set to an arbitrary digital value.However, to demonstrate the resolution of 12bit to its maximum, a digital range of 0 to 4000 is available.
A digital value is adjusted to 4000 at 10V in the analog output value when the voltage is output. A digital value is adjusted to 4000 at 20mA in the analog output value when the current is output.
0 4000
10V
Voltage outputcharacteristic (0 to 10V)
Ana
log
valu
e
Digital value
0 4000
5V
Voltage outputcharacteristic (0 to 5V)
Ana
log
valu
e
Digital value
Voltage outputcharacteristic (4 to 20mA)
0 4000
20mA
4mA
Ana
log
valu
e
Digital value
7.1.2 Adjustment of offset
The offset value when the voltage is input is 0V, and the offset value when the current is input is 4mA fixa-tion. However, the offset value/the gain value can be minute adjusted if necessary. Set at the followingwhen minute adjusting.
For instance, when a digital range of 0 to 4000 is used with the analogue range of 0 to 10V, a digital valueof 40 is equal to an analog output of 100mV, (40 × 10V/4000 digital points), when a digital range of 0 to4000 is used with the analogue range of 4 to 20mA, a digital value of 0 is equal to an analog output of4mA.
Ana
logu
eva
lue
D ig ita l va lue0 40
100m V
Voltage outputcharacteristic (0 to 10V)A t factory is sh ipped
0 80
100m V
Voltage outputcharacteris tic (0 to 5V )
Ana
logu
eva
lue
D ig ital va lue
Voltage outputcharacteris tic (4 to 20m A )
0
4m A
Ana
logu
eva
lue
D ig ital va lue
1) Do the offset adjustment and the gain adjustment respectively of CH1 and CH2.
2) Repeat the offset adjustment and gain adjustment alternately until a stable value is reached.
3) Do in order of the gain adjustment and the offset adjustment when you adjust offset/gain.
8. Program exampleThe following program examples (8.1 and 8.2) are formula circuits. The device numbers that have been underlined can be assigned by the user during programming.8.1 At connection to FX 0N series PLC
0X000
[T0 K0 K16 K4M 116 K1 ]
[T0 K0 K17 H 0004 K1 ]
[T0 K0 K17 H 0000 K1 ]
[M 0V D100 K4M 100 ]
[M 0V K2M 100 K2M 116 ]
[M 0V K2M 108 K2M 116 ]
[T0 K0 K17 H 0002 K1 ]
[T0 K0 K16 K4M 116 K1 ]
[T0 K0 K17 H 0004 K1 ]
[M 0V D101 K4M 100 ]
[T0 K0 K17 H 0000 K1 ]
[M 0V K2M 100 K2M 116 ]
[M 0V K2M 108 K2M 116 ]
[T0 K0 K17 H 0000 K1 ]
[T0 K0 K16 K4M 116 K1 ]
[T0 K0 K17 H 0000 K1 ]
61X001
a
b
c
d
e
g
h
i
j
k
l
m
n
[T0 K0 K16 K4M 116 K1 ] f
[T0 K0 K17 H 0001 K1 ]
a)Digital data (D100) is progressed to supplementary relay (M100-M115).
b)The subordinate position 8 bit data is moved.
c)The subordinate position 8 bit data is written.
d)The subordinate position 8 bit data is held.
e)The high rank 4 bit data is moved.
f) The high rank 4 bit data is written.
g)The D/A conversion of CH1 is exe-cuted.
h) Digital data (D101) is progressed tosupplementary relay (M100-M115).
i) The subordinate position 8 bit data ismoved.
j) The subordinate position 8 bit data iswritten.
k)The subordinate position 8 bit data isheld.
l) The high rank 4 bit data is moved.
m)The high rank 4 bit data is written.
n)The D/A conversion of CH2 is exe-cuted.
Digital to analog conversion execution input of CH1 :X000Digital to analog conversion execution input of CH2 :X001D/A output data CH1:D100 (Replace with auxiliary relay M100 to M131. Assign these numbers only one
time)D/A output data CH2:D101 (Replace with auxiliary relay M100 to M131. Assign these numbers only one
time)
Processing time:Time until FX2N-2DA outputs analog value after turning on X000 and X001. 4mS / 1 channel
8.2 At connection to FX 2N series PLC
Digital to analog conversion execution input of CH1 :X000Digital to analog conversion execution input of CH2 :X001D/A output data CH1:D100 (Replace with auxiliary relay M100 to M115. Assign these numbers only one
time)D/A output data CH2 :D101 (Replace with auxiliary relay M100 to M115. Assign these numbers only one
time)
Processing time:Time until FX2N-2DA outputs analog value after turning on X000 and X001. 4ms / 1 channel
0X000
[T0 K0 K17 H0004 K1 ]
51X001
[T0 K0 K16 K1M 108 K1 ]
[T0 K0 K17 H0000 K1 ]
[T0 K0 K17 H0000 K1 ]
[T0 K0 K17 H0004 K1 ]
[T0 K0 K16 K1M 108 K1 ]
[T0 K0 K17 H0000 K1 ]
[T0 K0 K17 H0000 K1 ]
[T0 K0 K16 K2M 100 K1 ]
[M 0V D100 K4M 100 ]
b
c
[T0 K0 K16 K2M 100 K1 ]
[M 0V D101 K4M 100 ]
a
e
i
d
g
h
f
j
[T0 K0 K17 H0002 K1 ]
[T0 K0 K17 H0001 K1 ]
a)Digital data (D100) is progressed tosupplementary relay (M100-M115).
b)The subordinate position 8 bit datais written.
c)The subordinate position 8 bit datais held.
d)The high rank 4 bit data is written.
e )The D/A conversion of CH1 is exe-cuted.
f) Digital data (D101) is progressed tosupplementary relay (M100-M115).
g)The subordinate position 8 bit datais written.
h)The subordinate position 8 bit datais held.
i) The high rank 4 bit data is written.
j) The D/A conversion of CH2 is exe-cuted.
9. Notes in drive
1) Confirm whether the output wiring of FX2N-2DA and the connection of the extension cable are cor-rectly done.
2) Confirm whether the "4. Connection with programmable controller" condition is satisfied.
3) When shipped from the factory, the output characteristic is adjusted to 0 to 10V DC. If a different output characteristic is desired, please adjust as required.
4) The mixture use for the voltage output/the current output is possible.
10. Error check
Confirm the following items when it is thought that the FX2N-2DA does not operate normally.
1) Confirm the state of POWER LED. Lit :The extension cable is correctly connected. Turn off or blinks :Confirm the proper connection of the extension cable.
2) Confirm whether it is external wiring per section 3.
3) Confirm whether the load resistance of the equipment connected with an analog output terminal is theone corresponding to FX2N-2DA.
4) Confirm the voltage and output Current values with a voltmeter and an ammeter. Confirm the digital toanalog conversion from the output characteristic. Readjust the offset and gain by "Change and adjust-ment method of the output characteristic" when you have converted D/A not suitable for the outputcharacteristic. The output characteristic when shipped from the factory is DC0-10V.
Guidelines for the safety of the user and protection of the FX 2N-2DA SPECIAL FUNCTION BLOCK
• This manual has been written to be used by trained and competent personnel. This is definedby the European directives for machinery, low voltage and EMC.
• If in doubt at any stage during the installation of the FX2N-2DA always consult a professionalelectrical engineer who is qualified and trained to the local and national standards. If in doubtabout the operation or use of the FX2N-2DA please consult the nearest Mitsubishi Electric dis-tributor.
• Under no circumstances will Mitsubishi Electric be liable or responsible for any consequentialdamage that may arise as a result of the installation or use of this equipment.
• All examples and diagrams shown in this manual are intended only as an aid to understand-ing the text, not to guarantee operation. Mitsubishi Electric will accept no responsibility foractual use of the product based on these illustrative examples.
• Owing to the very great variety in possible application of this equipment, you must satisfyyourself as to its suitability for your specific application.
Manual number : JY992D74901
Manual revision: B
Date : JANUARY 1999
JY992D74901BEffective JAN 1999Specifications are subject to change without notice
HEAD OFFICE : MITSUBISHI DENKI BLDG MARUNOUTI TOKYO 100-8310 TELEX : J24532 CABLE MELCO TOKYOHIMEJI WORKS : 840, CHIYODA CHO, HIMEJI, JAPAN
7. Adjustment of offset and gain
7.1 offset and gain
The offset value and the gain value when the factory is shipped are adjusted for a digital value to become 0to 4000 for the voltage output 0 to 10V. It is necessary to readjust the offset value and the gain value whenFX2N-2DA is used by the current output, and FX2N-2DA is used by the output characteristics other thanshipping the factory. The adjustment of the offset value and the gain value sets a digital value to the ana-logue value actually output by using the Voltmeter and the Ammeter according to the volume of FX2N-2DA.
*1 A digital value increases if the volume installed in FX2N-2DA is turned right (clockwise).
A+
-
VOUT
IOUT
COM
FX2N-2DA
AmmeterV+
-
VOUT
IOUT
COM
FX2N-2DA
VoltmeterPOWER
CO
M2
IOU
T1
VO
UT
1IO
UT2
VO
UT2
CO
M1
CH1OFFSET
OFFSETCH2GAIN
CH1
CH2GAIN
OFFSETCH1
CO
M2
POWER
OFFSETCH2
GAINCH1
CH2GAIN
CH1Offset volume
CH1Gain volume
CH2Offset volume
CH2Gain volume
OU
T2
Voltage output Current output Volume *1
7.1.1 Adjustment of gain
The gain value can be set to an arbitrary digital value.However, to demonstrate the resolution of 12bit to its maximum, a digital range of 0 to 4000 is available.
A digital value is adjusted to 4000 at 10V in the analog output value when the voltage is output. A digital value is adjusted to 4000 at 20mA in the analog output value when the current is output.
0 4000
10V
Voltage outputcharacteristic (0 to 10V)
Ana
log
valu
e
Digital value
0 4000
5V
Voltage outputcharacteristic (0 to 5V)
Ana
log
valu
e
Digital value
Voltage outputcharacteristic (4 to 20mA)
0 4000
20mA
4mA
Ana
log
valu
e
Digital value
7.1.2 Adjustment of offset
The offset value when the voltage is input is 0V, and the offset value when the current is input is 4mA fixa-tion. However, the offset value/the gain value can be minute adjusted if necessary. Set at the followingwhen minute adjusting.
For instance, when a digital range of 0 to 4000 is used with the analogue range of 0 to 10V, a digital valueof 40 is equal to an analog output of 100mV, (40 × 10V/4000 digital points), when a digital range of 0 to4000 is used with the analogue range of 4 to 20mA, a digital value of 0 is equal to an analog output of4mA.
Ana
logu
eva
lue
D ig ita l va lue0 40
100m V
Voltage outputcharacteristic (0 to 10V)A t factory is sh ipped
0 80
100m V
Voltage outputcharacteris tic (0 to 5V )
Ana
logu
eva
lue
D ig ital va lue
Voltage outputcharacteris tic (4 to 20m A )
0
4m A
Ana
logu
eva
lue
D ig ital va lue
1) Do the offset adjustment and the gain adjustment respectively of CH1 and CH2.
2) Repeat the offset adjustment and gain adjustment alternately until a stable value is reached.
3) Do in order of the gain adjustment and the offset adjustment when you adjust offset/gain.
8. Program exampleThe following program examples (8.1 and 8.2) are formula circuits. The device numbers that have been underlined can be assigned by the user during programming.8.1 At connection to FX 0N series PLC
0X000
[T0 K0 K16 K4M 116 K1 ]
[T0 K0 K17 H 0004 K1 ]
[T0 K0 K17 H 0000 K1 ]
[M 0V D100 K4M 100 ]
[M 0V K2M 100 K2M 116 ]
[M 0V K2M 108 K2M 116 ]
[T0 K0 K17 H 0002 K1 ]
[T0 K0 K16 K4M 116 K1 ]
[T0 K0 K17 H 0004 K1 ]
[M 0V D101 K4M 100 ]
[T0 K0 K17 H 0000 K1 ]
[M 0V K2M 100 K2M 116 ]
[M 0V K2M 108 K2M 116 ]
[T0 K0 K17 H 0000 K1 ]
[T0 K0 K16 K4M 116 K1 ]
[T0 K0 K17 H 0000 K1 ]
61X001
a
b
c
d
e
g
h
i
j
k
l
m
n
[T0 K0 K16 K4M 116 K1 ] f
[T0 K0 K17 H 0001 K1 ]
a)Digital data (D100) is progressed to supplementary relay (M100-M115).
b)The subordinate position 8 bit data is moved.
c)The subordinate position 8 bit data is written.
d)The subordinate position 8 bit data is held.
e)The high rank 4 bit data is moved.
f) The high rank 4 bit data is written.
g)The D/A conversion of CH1 is exe-cuted.
h) Digital data (D101) is progressed tosupplementary relay (M100-M115).
i) The subordinate position 8 bit data ismoved.
j) The subordinate position 8 bit data iswritten.
k)The subordinate position 8 bit data isheld.
l) The high rank 4 bit data is moved.
m)The high rank 4 bit data is written.
n)The D/A conversion of CH2 is exe-cuted.
Digital to analog conversion execution input of CH1 :X000Digital to analog conversion execution input of CH2 :X001D/A output data CH1:D100 (Replace with auxiliary relay M100 to M131. Assign these numbers only one
time)D/A output data CH2:D101 (Replace with auxiliary relay M100 to M131. Assign these numbers only one
time)
Processing time:Time until FX2N-2DA outputs analog value after turning on X000 and X001. 4mS / 1 channel
8.2 At connection to FX 2N series PLC
Digital to analog conversion execution input of CH1 :X000Digital to analog conversion execution input of CH2 :X001D/A output data CH1:D100 (Replace with auxiliary relay M100 to M115. Assign these numbers only one
time)D/A output data CH2 :D101 (Replace with auxiliary relay M100 to M115. Assign these numbers only one
time)
Processing time:Time until FX2N-2DA outputs analog value after turning on X000 and X001. 4ms / 1 channel
0X000
[T0 K0 K17 H0004 K1 ]
51X001
[T0 K0 K16 K1M 108 K1 ]
[T0 K0 K17 H0000 K1 ]
[T0 K0 K17 H0000 K1 ]
[T0 K0 K17 H0004 K1 ]
[T0 K0 K16 K1M 108 K1 ]
[T0 K0 K17 H0000 K1 ]
[T0 K0 K17 H0000 K1 ]
[T0 K0 K16 K2M 100 K1 ]
[M 0V D100 K4M 100 ]
b
c
[T0 K0 K16 K2M 100 K1 ]
[M 0V D101 K4M 100 ]
a
e
i
d
g
h
f
j
[T0 K0 K17 H0002 K1 ]
[T0 K0 K17 H0001 K1 ]
a)Digital data (D100) is progressed tosupplementary relay (M100-M115).
b)The subordinate position 8 bit datais written.
c)The subordinate position 8 bit datais held.
d)The high rank 4 bit data is written.
e )The D/A conversion of CH1 is exe-cuted.
f) Digital data (D101) is progressed tosupplementary relay (M100-M115).
g)The subordinate position 8 bit datais written.
h)The subordinate position 8 bit datais held.
i) The high rank 4 bit data is written.
j) The D/A conversion of CH2 is exe-cuted.
9. Notes in drive
1) Confirm whether the output wiring of FX2N-2DA and the connection of the extension cable are cor-rectly done.
2) Confirm whether the "4. Connection with programmable controller" condition is satisfied.
3) When shipped from the factory, the output characteristic is adjusted to 0 to 10V DC. If a different output characteristic is desired, please adjust as required.
4) The mixture use for the voltage output/the current output is possible.
10. Error check
Confirm the following items when it is thought that the FX2N-2DA does not operate normally.
1) Confirm the state of POWER LED. Lit :The extension cable is correctly connected. Turn off or blinks :Confirm the proper connection of the extension cable.
2) Confirm whether it is external wiring per section 3.
3) Confirm whether the load resistance of the equipment connected with an analog output terminal is theone corresponding to FX2N-2DA.
4) Confirm the voltage and output Current values with a voltmeter and an ammeter. Confirm the digital toanalog conversion from the output characteristic. Readjust the offset and gain by "Change and adjust-ment method of the output characteristic" when you have converted D/A not suitable for the outputcharacteristic. The output characteristic when shipped from the factory is DC0-10V.
Guidelines for the safety of the user and protection of the FX 2N-2DA SPECIAL FUNCTION BLOCK
• This manual has been written to be used by trained and competent personnel. This is definedby the European directives for machinery, low voltage and EMC.
• If in doubt at any stage during the installation of the FX2N-2DA always consult a professionalelectrical engineer who is qualified and trained to the local and national standards. If in doubtabout the operation or use of the FX2N-2DA please consult the nearest Mitsubishi Electric dis-tributor.
• Under no circumstances will Mitsubishi Electric be liable or responsible for any consequentialdamage that may arise as a result of the installation or use of this equipment.
• All examples and diagrams shown in this manual are intended only as an aid to understand-ing the text, not to guarantee operation. Mitsubishi Electric will accept no responsibility foractual use of the product based on these illustrative examples.
• Owing to the very great variety in possible application of this equipment, you must satisfyyourself as to its suitability for your specific application.
Manual number : JY992D74901
Manual revision: B
Date : JANUARY 1999
JY992D74901BEffective JAN 1999Specifications are subject to change without notice
HEAD OFFICE : MITSUBISHI DENKI BLDG MARUNOUTI TOKYO 100-8310 TELEX : J24532 CABLE MELCO TOKYOHIMEJI WORKS : 840, CHIYODA CHO, HIMEJI, JAPAN
7. Adjustment of offset and gain
7.1 offset and gain
The offset value and the gain value when the factory is shipped are adjusted for a digital value to become 0to 4000 for the voltage output 0 to 10V. It is necessary to readjust the offset value and the gain value whenFX2N-2DA is used by the current output, and FX2N-2DA is used by the output characteristics other thanshipping the factory. The adjustment of the offset value and the gain value sets a digital value to the ana-logue value actually output by using the Voltmeter and the Ammeter according to the volume of FX2N-2DA.
*1 A digital value increases if the volume installed in FX2N-2DA is turned right (clockwise).
A+
-
VOUT
IOUT
COM
FX2N-2DA
AmmeterV+
-
VOUT
IOUT
COM
FX2N-2DA
VoltmeterPOWER
CO
M2
IOU
T1
VO
UT
1IO
UT2
VO
UT2
CO
M1
CH1OFFSET
OFFSETCH2GAIN
CH1
CH2GAIN
OFFSETCH1
CO
M2
POWER
OFFSETCH2
GAINCH1
CH2GAIN
CH1Offset volume
CH1Gain volume
CH2Offset volume
CH2Gain volume
OU
T2
Voltage output Current output Volume *1
7.1.1 Adjustment of gain
The gain value can be set to an arbitrary digital value.However, to demonstrate the resolution of 12bit to its maximum, a digital range of 0 to 4000 is available.
A digital value is adjusted to 4000 at 10V in the analog output value when the voltage is output. A digital value is adjusted to 4000 at 20mA in the analog output value when the current is output.
0 4000
10V
Voltage outputcharacteristic (0 to 10V)
Ana
log
valu
e
Digital value
0 4000
5V
Voltage outputcharacteristic (0 to 5V)
Ana
log
valu
e
Digital value
Voltage outputcharacteristic (4 to 20mA)
0 4000
20mA
4mA
Ana
log
valu
e
Digital value
7.1.2 Adjustment of offset
The offset value when the voltage is input is 0V, and the offset value when the current is input is 4mA fixa-tion. However, the offset value/the gain value can be minute adjusted if necessary. Set at the followingwhen minute adjusting.
For instance, when a digital range of 0 to 4000 is used with the analogue range of 0 to 10V, a digital valueof 40 is equal to an analog output of 100mV, (40 × 10V/4000 digital points), when a digital range of 0 to4000 is used with the analogue range of 4 to 20mA, a digital value of 0 is equal to an analog output of4mA.
Ana
logu
eva
lue
D ig ita l va lue0 40
100m V
Voltage outputcharacteristic (0 to 10V)A t factory is sh ipped
0 80
100m V
Voltage outputcharacteris tic (0 to 5V )
Ana
logu
eva
lue
D ig ital va lue
Voltage outputcharacteris tic (4 to 20m A )
0
4m A
Ana
logu
eva
lue
D ig ital va lue
1) Do the offset adjustment and the gain adjustment respectively of CH1 and CH2.
2) Repeat the offset adjustment and gain adjustment alternately until a stable value is reached.
3) Do in order of the gain adjustment and the offset adjustment when you adjust offset/gain.
8. Program exampleThe following program examples (8.1 and 8.2) are formula circuits. The device numbers that have been underlined can be assigned by the user during programming.8.1 At connection to FX 0N series PLC
0X000
[T0 K0 K16 K4M 116 K1 ]
[T0 K0 K17 H 0004 K1 ]
[T0 K0 K17 H 0000 K1 ]
[M 0V D100 K4M 100 ]
[M 0V K2M 100 K2M 116 ]
[M 0V K2M 108 K2M 116 ]
[T0 K0 K17 H 0002 K1 ]
[T0 K0 K16 K4M 116 K1 ]
[T0 K0 K17 H 0004 K1 ]
[M 0V D101 K4M 100 ]
[T0 K0 K17 H 0000 K1 ]
[M 0V K2M 100 K2M 116 ]
[M 0V K2M 108 K2M 116 ]
[T0 K0 K17 H 0000 K1 ]
[T0 K0 K16 K4M 116 K1 ]
[T0 K0 K17 H 0000 K1 ]
61X001
a
b
c
d
e
g
h
i
j
k
l
m
n
[T0 K0 K16 K4M 116 K1 ] f
[T0 K0 K17 H 0001 K1 ]
a)Digital data (D100) is progressed to supplementary relay (M100-M115).
b)The subordinate position 8 bit data is moved.
c)The subordinate position 8 bit data is written.
d)The subordinate position 8 bit data is held.
e)The high rank 4 bit data is moved.
f) The high rank 4 bit data is written.
g)The D/A conversion of CH1 is exe-cuted.
h) Digital data (D101) is progressed tosupplementary relay (M100-M115).
i) The subordinate position 8 bit data ismoved.
j) The subordinate position 8 bit data iswritten.
k)The subordinate position 8 bit data isheld.
l) The high rank 4 bit data is moved.
m)The high rank 4 bit data is written.
n)The D/A conversion of CH2 is exe-cuted.
Digital to analog conversion execution input of CH1 :X000Digital to analog conversion execution input of CH2 :X001D/A output data CH1:D100 (Replace with auxiliary relay M100 to M131. Assign these numbers only one
time)D/A output data CH2:D101 (Replace with auxiliary relay M100 to M131. Assign these numbers only one
time)
Processing time:Time until FX2N-2DA outputs analog value after turning on X000 and X001. 4mS / 1 channel
8.2 At connection to FX 2N series PLC
Digital to analog conversion execution input of CH1 :X000Digital to analog conversion execution input of CH2 :X001D/A output data CH1:D100 (Replace with auxiliary relay M100 to M115. Assign these numbers only one
time)D/A output data CH2 :D101 (Replace with auxiliary relay M100 to M115. Assign these numbers only one
time)
Processing time:Time until FX2N-2DA outputs analog value after turning on X000 and X001. 4ms / 1 channel
0X000
[T0 K0 K17 H0004 K1 ]
51X001
[T0 K0 K16 K1M 108 K1 ]
[T0 K0 K17 H0000 K1 ]
[T0 K0 K17 H0000 K1 ]
[T0 K0 K17 H0004 K1 ]
[T0 K0 K16 K1M 108 K1 ]
[T0 K0 K17 H0000 K1 ]
[T0 K0 K17 H0000 K1 ]
[T0 K0 K16 K2M 100 K1 ]
[M 0V D100 K4M 100 ]
b
c
[T0 K0 K16 K2M 100 K1 ]
[M 0V D101 K4M 100 ]
a
e
i
d
g
h
f
j
[T0 K0 K17 H0002 K1 ]
[T0 K0 K17 H0001 K1 ]
a)Digital data (D100) is progressed tosupplementary relay (M100-M115).
b)The subordinate position 8 bit datais written.
c)The subordinate position 8 bit datais held.
d)The high rank 4 bit data is written.
e )The D/A conversion of CH1 is exe-cuted.
f) Digital data (D101) is progressed tosupplementary relay (M100-M115).
g)The subordinate position 8 bit datais written.
h)The subordinate position 8 bit datais held.
i) The high rank 4 bit data is written.
j) The D/A conversion of CH2 is exe-cuted.
9. Notes in drive
1) Confirm whether the output wiring of FX2N-2DA and the connection of the extension cable are cor-rectly done.
2) Confirm whether the "4. Connection with programmable controller" condition is satisfied.
3) When shipped from the factory, the output characteristic is adjusted to 0 to 10V DC. If a different output characteristic is desired, please adjust as required.
4) The mixture use for the voltage output/the current output is possible.
10. Error check
Confirm the following items when it is thought that the FX2N-2DA does not operate normally.
1) Confirm the state of POWER LED. Lit :The extension cable is correctly connected. Turn off or blinks :Confirm the proper connection of the extension cable.
2) Confirm whether it is external wiring per section 3.
3) Confirm whether the load resistance of the equipment connected with an analog output terminal is theone corresponding to FX2N-2DA.
4) Confirm the voltage and output Current values with a voltmeter and an ammeter. Confirm the digital toanalog conversion from the output characteristic. Readjust the offset and gain by "Change and adjust-ment method of the output characteristic" when you have converted D/A not suitable for the outputcharacteristic. The output characteristic when shipped from the factory is DC0-10V.
Guidelines for the safety of the user and protection of the FX 2N-2DA SPECIAL FUNCTION BLOCK
• This manual has been written to be used by trained and competent personnel. This is definedby the European directives for machinery, low voltage and EMC.
• If in doubt at any stage during the installation of the FX2N-2DA always consult a professionalelectrical engineer who is qualified and trained to the local and national standards. If in doubtabout the operation or use of the FX2N-2DA please consult the nearest Mitsubishi Electric dis-tributor.
• Under no circumstances will Mitsubishi Electric be liable or responsible for any consequentialdamage that may arise as a result of the installation or use of this equipment.
• All examples and diagrams shown in this manual are intended only as an aid to understand-ing the text, not to guarantee operation. Mitsubishi Electric will accept no responsibility foractual use of the product based on these illustrative examples.
• Owing to the very great variety in possible application of this equipment, you must satisfyyourself as to its suitability for your specific application.
Manual number : JY992D74901
Manual revision: B
Date : JANUARY 1999
JY992D74901BEffective JAN 1999Specifications are subject to change without notice
FX2N-2DA SPECIAL FUNCTIONBLOCK
USER’S GUIDE
JY992D74901B
This manual contains text, diagrams and explanations which will guide the reader in the correct installationand operation of the FX2N-2DA special function block and should be read and understood before attempt-ing to install or use the unit.Further information can be found in the FX SERIES PROGRAMMING MANUAL,FX2N SERIES HARD-WARE MANUAL.
1. INTRODUCTION
The FX2N-2DA type analog output block (Hereafter referred to as the FX2N-2DA) is used to convert a digi-tal value of 12 bits into an analog output of two points (voltage output and current output), and to forwardthe values to the Programmable controller (Hereafter referred to as a PLC). FX2N-2DA can be connected with FX0N, FX2N, and the FX2NC series Programmable controllers.
1) The analog out put is selected from the voltage output or the current output by the method of connect-ing wires.At this time, assume setting to be two channels common analog output.
2) The two analog output channels can accept output of 0 to 10V DC, 0 to 5V DC, or 4 to 20mA. (The mixture use for the voltage output/the current output is possible.)
3) Resolution is 2.5mV (0 to 10V DC) and 4µA(4 to 20mA).
4) The digital to analog conversion characteristics can be adjusted.
5) The block occupies 8 I/O points which can be allocated from either inputs or outputs.
6) The data transfer with the PLC uses the FROM/TO instruction.
2. EXTERNAL DIMENSIONS AND PARTS
Dimensions:mm (inches)
DIN railmountingslot35mm(1.38)
Mountingholes2holes4.5(0.18)dia
Extensioncable
43(1.69)
80
(3.1
5)
87(3.43)
9(0.35) 4(0.16)
90
(3.5
4)
M3(0.12)terminal screws
OFF SET/GAINvolumeWeight:0.2kg Accessories:Exchange number label
3. WIRING
*1 Connect a 0.1 to 0.47 µF 25V DC capacitor with the position of *1 when there is voltage ripple in the voltage output or there will be a lot of noise.
*2 For voltage output please short circuit IOUT and COM as shown in the diagram.
*1VO UTIO UTCO M
VO UTIO UTCO M
Extensioncable
PLC DC/DCconverter
+15V
-15V
AG
Inverteretc
Recorderetc
*3
Current output
Vo ltage output
FX2N-2DA
*3 Channel num ber enter
*2
4. Connection with Programmable controller
1) The number of FX2N-2DA which can be connected is 4 or less in the FX0N series PLC, 8 or less in theFX2N series PLC, and 4 or less in the FX2NC series PLC per Main unit with powered extension units.However the following limitation exists when undermentiond special function blocks are connected.
FX2N :Main unit and powered extension units of I/O 32points or less. 24V DC consumption current total value of undermentioned special function blocks used ≤ 190mA
FX2N :Main unit and powered extension units of I/O 48points or more. 24V DC consumption current total value of undermentioned special function blocks used ≤ 300mA
FX2NC:The undermentiond special function blocks can be connected up to 4 regardless of the I/O numberof Main units.
FX0N :The undermentioned special function blocks can be connected up to 2 regardless of the I/O num-ber of Main units and powered extension units.
FX2N-2DA FX2N-2AD FX0N-3A
Consumption current of 24V DC for one 85mA 50mA 90mA
The capacity of DC 24V power supply which can used for extension blocks of the service power sup-ply and I/O reaches the value by which the total value of the consumption current of the above men-tioned special function block is subtracted from a service voltage source capacity the programmablecontroller original. For instance, the service power supply the FX2N-32MT is 250mA. When two FX2N-2DA blocks are connected, the service power supply is reduced to 80mA.
2) The blocks occupy 8 points (The 8 points can be allocated from either inputs or outputs).
3) FX2N-2DA consumes 5V DC 30mA.The total of 5V of the special function block connected with the main unit of the PLC consumption cur-rent must not exceed 5V voltage source capacity of the main unit and the powered extension unit.
4) The FX2N-2DA and the main unit are connected with the cable at the right of the main unit.
72 4 5 61 30
1611 1514 1710 12 13
14 171510 12 13
72 4 5 61 30
1611
OUT
IN
L X13 X15X10 X14 X16
24+NCOM X4
X7
Y4Y5
Y6COM3
Y10Y11
Y12Y13Y1
Y2Y3
Y14Y15
X3X2
X1
POWER
BATT.V
RUN
CPU.E
PROG.E
FX2N-32MR FX2N-2DA FX2N-16EX FX2N-2DA FX2N-32ER FX2N-2DA
POWER
2NFX -2DA
POWER
2NFX -2DA
POWER
2NFX -2DA
1IN 0
7
23456
POWER
1IN 0
7
23456
X0X5
72 4 5 61 30
72 4 5 61 30
OUT
IN
L X1 X3 X5 X7X6 X0 X2 X4 X6
24+NCOM X4
X7
COM4COM2Y4
Y5Y6
Y7 COM3Y0
Y1Y2
Y3COM1Y0
Y1Y2
Y3Y4
Y5Y6
Y7
X3X2
X1
POWER
0 1 2 3 4 5 6 7
76543210
5. SPECIFICATIONS
5.1 Environment specification
Environmental specifications other than the above-mentioned are the same as the main unit of the Programmable controller. (Refer to the manual of the Programmable controller)
5.2 Power supply specification and others
Item Content
Directric Withstand voltage
500V AC 1min(Between analog output terminals and case)
Item Content
Analog circuits 24V DC ±10% 85mA (Internal power supplied from the main unit)
Digital circuits 5V DC 30mA (Internal power supplied from main unit)
5.3 Defining gain and offset
IsolationPhoto-coupler isolation between analog and digital circuits. DC/DC converter isolation of power from main unit.(No isolation between analog channels.)
Number of occupiedI/O points
The blocks occupy either 8 input or output points. (can be either inputs or outputs)
Item Voltage output Current output
Range of analog output
At shipping, the unit is adjusted to a digital range of 0 to 4000 for an analog voltage output of 0 to 10V DC. When using FX2N-2DA by the current input or the 0 to 5V DC output, it is necessary to readjust by the offset and gain vol-umes.
0 to 10V DC, 0 to 5V DC (External load resistance 2K to 1MΩ)
4 to 20mA (External load resistance 500Ω or less)
Item Content
Digital input 12bit
Resolution 2.5mV(10V/4000) 1.25mV(5V/4000) 4µA (20-4)/4000
Integrated accuracy ±1% (full scale 0 to 10V) ±1% (full scale 4 to 20mA)
Processing time 4ms/1 channel (sequence program and synchronization)
Item Voltage output Current output
output characteristics
Only subordinate position 12bit becomes effective when the data of 13bit or more is input, and high rank bit any more is disregarded. Use a digital value within the range from 0 to 4095.The output characteristic can be set to each two channels.
Item Voltage output Current output
Digital value0 4000
10V
Analogue valueDigital value
Offset value is fixation
:0 to 10V:0 to 4000
Ana
logu
eva
lue
10.238V
4095
Ana
logu
eva
lue
Digital value0 4000
20mA
4mA
Analogue valueDigital value
:4 to 20mA:0 to 4000
20.380mA
4095
6. Allocation of buffer memory (BFM)
6.1 Buffer memory
BFMnumber
b15 to b8 b7 to b3 b2 b1 b0
#0 to #15 Reserved
#16 Reserved Current value of output data(8 bit)
#17 ReservedD/A subordinate position data hold-ing
CH1 D/A conver-sion beginning
CH2 D/A conver-sion beginning
#18 or more Reserved
BFM#16:The D/A conversion data of the channel specified with BFM#17 (digital value) is written. The D/A data is written in the binary in order of subordinate position 8bit and high rank 4bit,divided into two portions.
BFM#17:b0•••The D/A conversion of CH2 begins by changing of 1→0. b1•••The D/A conversion of CH1 begins by changing of 1→0. b2•••The subordinate position eight bit data for the D/A conversion is held by changing of 1→0.
Write data in above-mentioned buffer memory by "8.Program example".
HEAD OFFICE : MITSUBISHI DENKI BLDG MARUNOUTI TOKYO 100-8310 TELEX : J24532 CABLE MELCO TOKYOHIMEJI WORKS : 840, CHIYODA CHO, HIMEJI, JAPAN
7. Adjustment of offset and gain
7.1 offset and gain
The offset value and the gain value when the factory is shipped are adjusted for a digital value to become 0to 4000 for the voltage output 0 to 10V. It is necessary to readjust the offset value and the gain value whenFX2N-2DA is used by the current output, and FX2N-2DA is used by the output characteristics other thanshipping the factory. The adjustment of the offset value and the gain value sets a digital value to the ana-logue value actually output by using the Voltmeter and the Ammeter according to the volume of FX2N-2DA.
*1 A digital value increases if the volume installed in FX2N-2DA is turned right (clockwise).
A+
-
VOUT
IOUT
COM
FX2N-2DA
AmmeterV+
-
VOUT
IOUT
COM
FX2N-2DA
VoltmeterPOWER
CO
M2
IOU
T1
VO
UT
1IO
UT2
VO
UT2
CO
M1
CH1OFFSET
OFFSETCH2GAIN
CH1
CH2GAIN
OFFSETCH1
CO
M2
POWER
OFFSETCH2
GAINCH1
CH2GAIN
CH1Offset volume
CH1Gain volume
CH2Offset volume
CH2Gain volume
OU
T2
Voltage output Current output Volume *1
7.1.1 Adjustment of gain
The gain value can be set to an arbitrary digital value.However, to demonstrate the resolution of 12bit to its maximum, a digital range of 0 to 4000 is available.
A digital value is adjusted to 4000 at 10V in the analog output value when the voltage is output. A digital value is adjusted to 4000 at 20mA in the analog output value when the current is output.
0 4000
10V
Voltage outputcharacteristic (0 to 10V)
Ana
log
valu
e
Digital value
0 4000
5V
Voltage outputcharacteristic (0 to 5V)
Ana
log
valu
e
Digital value
Voltage outputcharacteristic (4 to 20mA)
0 4000
20mA
4mA
Ana
log
valu
e
Digital value
7.1.2 Adjustment of offset
The offset value when the voltage is input is 0V, and the offset value when the current is input is 4mA fixa-tion. However, the offset value/the gain value can be minute adjusted if necessary. Set at the followingwhen minute adjusting.
For instance, when a digital range of 0 to 4000 is used with the analogue range of 0 to 10V, a digital valueof 40 is equal to an analog output of 100mV, (40 × 10V/4000 digital points), when a digital range of 0 to4000 is used with the analogue range of 4 to 20mA, a digital value of 0 is equal to an analog output of4mA.
Ana
logu
eva
lue
D ig ita l va lue0 40
100m V
Voltage outputcharacteristic (0 to 10V)A t factory is sh ipped
0 80
100m V
Voltage outputcharacteris tic (0 to 5V )
Ana
logu
eva
lue
D ig ital va lue
Voltage outputcharacteris tic (4 to 20m A )
0
4m A
Ana
logu
eva
lue
D ig ital va lue
1) Do the offset adjustment and the gain adjustment respectively of CH1 and CH2.
2) Repeat the offset adjustment and gain adjustment alternately until a stable value is reached.
3) Do in order of the gain adjustment and the offset adjustment when you adjust offset/gain.
8. Program exampleThe following program examples (8.1 and 8.2) are formula circuits. The device numbers that have been underlined can be assigned by the user during programming.8.1 At connection to FX 0N series PLC
0X000
[T0 K0 K16 K4M 116 K1 ]
[T0 K0 K17 H 0004 K1 ]
[T0 K0 K17 H 0000 K1 ]
[M 0V D100 K4M 100 ]
[M 0V K2M 100 K2M 116 ]
[M 0V K2M 108 K2M 116 ]
[T0 K0 K17 H 0002 K1 ]
[T0 K0 K16 K4M 116 K1 ]
[T0 K0 K17 H 0004 K1 ]
[M 0V D101 K4M 100 ]
[T0 K0 K17 H 0000 K1 ]
[M 0V K2M 100 K2M 116 ]
[M 0V K2M 108 K2M 116 ]
[T0 K0 K17 H 0000 K1 ]
[T0 K0 K16 K4M 116 K1 ]
[T0 K0 K17 H 0000 K1 ]
61X001
a
b
c
d
e
g
h
i
j
k
l
m
n
[T0 K0 K16 K4M 116 K1 ] f
[T0 K0 K17 H 0001 K1 ]
a)Digital data (D100) is progressed to supplementary relay (M100-M115).
b)The subordinate position 8 bit data is moved.
c)The subordinate position 8 bit data is written.
d)The subordinate position 8 bit data is held.
e)The high rank 4 bit data is moved.
f) The high rank 4 bit data is written.
g)The D/A conversion of CH1 is exe-cuted.
h) Digital data (D101) is progressed tosupplementary relay (M100-M115).
i) The subordinate position 8 bit data ismoved.
j) The subordinate position 8 bit data iswritten.
k)The subordinate position 8 bit data isheld.
l) The high rank 4 bit data is moved.
m)The high rank 4 bit data is written.
n)The D/A conversion of CH2 is exe-cuted.
Digital to analog conversion execution input of CH1 :X000Digital to analog conversion execution input of CH2 :X001D/A output data CH1:D100 (Replace with auxiliary relay M100 to M131. Assign these numbers only one
time)D/A output data CH2:D101 (Replace with auxiliary relay M100 to M131. Assign these numbers only one
time)
Processing time:Time until FX2N-2DA outputs analog value after turning on X000 and X001. 4mS / 1 channel
8.2 At connection to FX 2N series PLC
Digital to analog conversion execution input of CH1 :X000Digital to analog conversion execution input of CH2 :X001D/A output data CH1:D100 (Replace with auxiliary relay M100 to M115. Assign these numbers only one
time)D/A output data CH2 :D101 (Replace with auxiliary relay M100 to M115. Assign these numbers only one
time)
Processing time:Time until FX2N-2DA outputs analog value after turning on X000 and X001. 4ms / 1 channel
0X000
[T0 K0 K17 H0004 K1 ]
51X001
[T0 K0 K16 K1M 108 K1 ]
[T0 K0 K17 H0000 K1 ]
[T0 K0 K17 H0000 K1 ]
[T0 K0 K17 H0004 K1 ]
[T0 K0 K16 K1M 108 K1 ]
[T0 K0 K17 H0000 K1 ]
[T0 K0 K17 H0000 K1 ]
[T0 K0 K16 K2M 100 K1 ]
[M 0V D100 K4M 100 ]
b
c
[T0 K0 K16 K2M 100 K1 ]
[M 0V D101 K4M 100 ]
a
e
i
d
g
h
f
j
[T0 K0 K17 H0002 K1 ]
[T0 K0 K17 H0001 K1 ]
a)Digital data (D100) is progressed tosupplementary relay (M100-M115).
b)The subordinate position 8 bit datais written.
c)The subordinate position 8 bit datais held.
d)The high rank 4 bit data is written.
e )The D/A conversion of CH1 is exe-cuted.
f) Digital data (D101) is progressed tosupplementary relay (M100-M115).
g)The subordinate position 8 bit datais written.
h)The subordinate position 8 bit datais held.
i) The high rank 4 bit data is written.
j) The D/A conversion of CH2 is exe-cuted.
9. Notes in drive
1) Confirm whether the output wiring of FX2N-2DA and the connection of the extension cable are cor-rectly done.
2) Confirm whether the "4. Connection with programmable controller" condition is satisfied.
3) When shipped from the factory, the output characteristic is adjusted to 0 to 10V DC. If a different output characteristic is desired, please adjust as required.
4) The mixture use for the voltage output/the current output is possible.
10. Error check
Confirm the following items when it is thought that the FX2N-2DA does not operate normally.
1) Confirm the state of POWER LED. Lit :The extension cable is correctly connected. Turn off or blinks :Confirm the proper connection of the extension cable.
2) Confirm whether it is external wiring per section 3.
3) Confirm whether the load resistance of the equipment connected with an analog output terminal is theone corresponding to FX2N-2DA.
4) Confirm the voltage and output Current values with a voltmeter and an ammeter. Confirm the digital toanalog conversion from the output characteristic. Readjust the offset and gain by "Change and adjust-ment method of the output characteristic" when you have converted D/A not suitable for the outputcharacteristic. The output characteristic when shipped from the factory is DC0-10V.
Guidelines for the safety of the user and protection of the FX 2N-2DA SPECIAL FUNCTION BLOCK
• This manual has been written to be used by trained and competent personnel. This is definedby the European directives for machinery, low voltage and EMC.
• If in doubt at any stage during the installation of the FX2N-2DA always consult a professionalelectrical engineer who is qualified and trained to the local and national standards. If in doubtabout the operation or use of the FX2N-2DA please consult the nearest Mitsubishi Electric dis-tributor.
• Under no circumstances will Mitsubishi Electric be liable or responsible for any consequentialdamage that may arise as a result of the installation or use of this equipment.
• All examples and diagrams shown in this manual are intended only as an aid to understand-ing the text, not to guarantee operation. Mitsubishi Electric will accept no responsibility foractual use of the product based on these illustrative examples.
• Owing to the very great variety in possible application of this equipment, you must satisfyyourself as to its suitability for your specific application.
Manual number : JY992D74901
Manual revision: B
Date : JANUARY 1999
JY992D74901BEffective JAN 1999Specifications are subject to change without notice
902 244 204www.elmeq.es
Motor Paso a PasoSMD Mdrive+ 1719 Motor para posicionado con electrónica de potencia integrada,
IMS - Schneider Electric Parametrizable por PC,Puesta en marcha y dimensiones óptimas,
Certificado CE.
Productos asociados:
> AlimentaciónPS-24/7,5L
S-100-24S-150-24
> ElectrónicaSistema integrado
53 Ncm
Tensión de alimentación +/-10% 12-48V ENTRADAS/SALIDAS 3Consumo máximo A 2 Descripción Pulso, Direccion y habilitacionPar nominal de mantenimiento Ncm 53 Inercia del rotor gcm² 82Par residual mNm 25 Protección TermicaResolución (µpaso/paso) 1,2,4,5,8,10,16,25,32,50,64,100,108 Conexión Cables 300 mmResolución (µpaso/paso) 125,127,128,180,200,250,256 Cojinetes de fricción Rodamientos de bolasFrecuencia de pulsos máxima (tiempo de ciclo=50%) KHz 2000 Carga axial máxima 50 N
Juego axial Nulo con precargaCarga radiál máxima 30 Na une distancia de la brida de 20 mmTemperatura mínima de funcionamiento -40°CTemperatura máxima de funcionamiento 85°CTemperatura máxima del rotor 100°CPeso 431 g
PLANO 3D (IGES)
Las Ventajas:
The
info
rmat
ion
prov
ided
in th
is d
ocum
enta
tion
cont
ains
gen
eral
des
crip
tions
and
/or t
echn
ical
cha
ract
eris
tics
of th
e pe
rform
ance
of t
he p
rodu
cts
cont
aine
d he
rein
.Th
is d
ocum
enta
tion
is n
ot in
tend
ed a
s a
subs
titut
e fo
r and
is n
ot to
be
used
for d
eter
min
ing
suita
bilit
y or
relia
bilit
y of
thes
e pr
oduc
ts fo
r spe
cific
use
r app
licat
ions
.It
is th
e du
ty o
f any
suc
h us
er o
r int
egra
tor t
o pe
rform
the
appr
opria
te a
nd c
ompl
ete
risk
anal
ysis
, eva
luat
ion
and
test
ing
of th
e pr
oduc
ts w
ith re
spec
t to
the
rele
vant
spe
cific
app
licat
ion
or u
se th
ereo
f.N
eith
er S
chne
ider
Ele
ctric
Indu
strie
s SA
S no
r any
of i
ts a
ffilia
tes
or s
ubsi
diar
ies
shal
l be
resp
onsi
ble
or li
able
for m
isus
e of
the
info
rmat
ion
cont
aine
d he
rein
.
Jul 28, 20111
Product data sheetCharacteristics
XS508B1PAL2inductive sensor XS5 M8 - L33mm - stainless -Sn15mm - 12..24VDC - cable 2m
MainRange of product OsiSense XSSeries name General purposeSensor type Inductive proximity sensorProduct specific appli-cation
-
Sensor name XS5Sensor design Cylindrical M8Size 33 mmBody type FixedDetector flush mountingacceptance
Flush mountable
Material MetalType of output signal DiscreteWiring technique 3-wire[Sd] sensing range > 0...2.5 mm[Sn] nominal sensingdistance
1.5 mm
Discrete output function 1 NOOutput circuit type DCDiscrete output type PNPElectrical connection CableCable length 2 m[Us] rated supply volt-age
12...24 V DC with reverse polarity protection
Switching capacity inmA
<= 200 mA DC with overload and short-circuit pro-tection
IP degree of protection IP67 conforming to IEC 60529
ComplementaryISO thread M8 x 1Detection face FrontalEnclosure material Nickel plated brassOperating zone 0...1.2 mmDifferential travel 1...15% of SrCable composition 3 x 0.11 mm²Wire insulation material PvRStatus LED 1 LED (yellow) for output stateSupply voltage limits 10...36 V DCSwitching frequency <= 5000 HzVoltage drop <= 2 V, closed stateCurrent consumption <= 10 mA (no-load)Delay first up <= 10 msDelay response <= 0.1 msDelay recovery <= 0.1 msMarking CEThreaded length 25 mmLength 33 mmCAD overall height 8 mm
2
CAD overall depth 33 mmProduct weight 0.035 kg
EnvironmentProduct certifications CSA
ULAmbient air temperature for operation -25...70 °CAmbient air temperature for storage -40...85 °CVibration resistance 25 gn, amplitude: +/- 2 mm (f = 10...55 Hz) conforming to IEC 60068-2-6Shock resistance 50 gn (duration = 11 ms) conforming to IEC 60068-2-27RoHS EUR status CompliantRoHS EUR conformity date 0953
NA
FSA
res
erve
s th
e ri
ght t
o an
y m
odifi
catio
n
N A F S A
NA
SA
Protection rate: IP00 EN60529Insulation class: E (120ºC)Standard voltage: from 6 to 12 VdcUnder demand voltage: contactStandard stroke "s": 5mmDuty cycle ED: 33%Coil resistance at 20ºC: 8 OhmInitial force: 1,5 NHolding force: 6NPlunger weight: 5 grSolenoid weight: 40 gr
9.1Electroimanes de accionamiento NAFSA S.L. -(www.nafsa.es) -Phone: +34 94 453 10 61-Fax: +34 94 625 01 51 -E-mail: [email protected]
Bistable reversible solenoidERDI15 TYPE
Revision: 1/2012
Plunger stroke direction
ASSEMBLY: the screw does not have to exceed the wallof the magnetic circuit
*Obligatory earthing if the metallic partsare accessible.
Dimensionnal drawing:
Ordering code: ERDI15 6V 33%
Force-stroke Curve (F-S)
Voltage 6V - (Coil in parallel) Voltage 12V - (Coil in serie)
This solenoid has two rest ing positions, the stroke movement "s" from a position to the otherone is made by a polarized electric signal, the plunger is retained in each end of stroke positionusing permanent magnets.
Connection scheme:
Magnet coil A
Magnet coil B
Red cable - A
White cable - B
White cable - A
Red cable - B
B BA
A
Towards B
Towards A-
-+
+Towards B
Towards A-
-+
+
Red AWhite B
Red BWhite A Red A Red B
White A and B White
Top Related