Sistema prevención contra caídas y rescate en espacios confinados
-
Upload
manuel-jose-morales-martinez -
Category
Science
-
view
121 -
download
2
Transcript of Sistema prevención contra caídas y rescate en espacios confinados
ww
w.
uc
ls
af
et
ys
ys
te
ms
.c
om
Copyright © 2006 • Unique Concepts Limited • All Rights Reserved • Patent Pending
Part # 9700107 • Rev. 00 • Printed in USA •
Information / Images subject to change without notice
For more information on the Side Entry
System please contact the distributor or
manufacturer listed below.
Price Part # Description
14803 Arm Assembly for the Side Entry System Weight: 44 lbs (19.9 Kg)
14796 Support Post (38” to 53 1/2”) Weight: 35 lbs (15.8 Kg)
10100 15” Mast Extension (shown) Weight: 16 lbs ( 7.2 Kg)
10101 24” Mast Extension Weight: 19 lbs ( 8.6 Kg)
10102 36” Mast Extension Weight: 23 lbs ( 10.4 Kg)
10103 48” Mast Extension Weight: 27 lbs ( 12.2 Kg)
N/A Fixed Base*
N/A UCL Advanced Digital Winch Sold separately.
1
1
2
5
5
2
3
4
3
Floor Mount Center Mount Wall Mount Fresh Concrete Existing
Concrete
Deck Mount Core Mount
4
*Please refer to the UCL Hoist, Davits, Bases & Accessories catalogue for more information
or call for details. Custom fixed bases and mast extensions are available to meet unique
requirements.
The UCL model 14796 Side Entry Support Post is
designed to allow the use of most UCL Safety Systems
fixed bases as permanently installed mounts for the
Side Entry System. The post also allows you to
combine a variety of UCL lower mast extensions to
accommodate varying heights. *Some restrictions
may apply. Call UCL for more information.
14796
Please refer to the UCL Winches, Brackets & SRLs catalogue for more info.
Side Entry System Permanent Mount Application Features
Unit 1 - 1500 King Edward Street
Winnipeg, Manitoba, Canada
R3H 0R5
Phone: 204-694-7432
Toll Free: 1-800-455-9673
Fax: 204-694-7612
E-mail: [email protected]
Or visit www.uclsafetysystems.com
Manufactured by:
Unique Concepts Ltd.
USA: 1-800-328-6146
Canada: 1-800-387-7484
Asia: +852 2992 0381
Northern Europe: +44 (0) 1928 57 1324
Europe, Middle East, Africa:
+33 (0) 497 10 00 10
Australia, New Zealand: 1800 245 002
Or visit www.capitalsafety.com
You are reading the brochure
highlited below:
Look for these additional UCL Accessory
brochures marked * to accompany this
catalogue:
* Hoists, Davits, Bases & Accessories - #9700101
Vehicle Hitch Mount Sleeve - #9700102
Counterweight Systems - #9700103
* Winches & Brackets - #9700104
Tripods & Accessories - #9700105
Pole Hoist - #9700106
Side Entry/Tank Pod Systems - #9700107
Portable Fall Arrest Systems - #9700108
Engineered Systems - #9700109
Portable Tanker Access Ladder Sys. - #9700110
Basic Hoists - #9700111
Fold Up Hoist - #9700112
Glide 360 Rail System - #9700113
UCL Product Summary - #9700114
External Adjustable Tank Collar: This collar is designed to attach
various UCL Safety Systems accessories to the flanges of manways.
Made of powder-coated, lightweight aluminum, the External Tank Collar
assembles and installs quickly with minimal tools. The External Tank
Collar may be used as a mounting base for a variety of accessories
including fixed and adjustable sleeves for UCL Safety Systems davit
arms and the UCL Side Entry System.
Price Part # Description
11231 External Adjustable Tank Collar
Total Weight: 52 lbs (23.5 Kg)
The UCL Side Entry System is designed for
confined space entry/retrieval and rescue
operations involving horizontal entries with vertical
positioning or retrieval required inside the space.
The Side Entry System may be used with the
model 11231 External Adjustable Tank Collar
for adaptation to different manways. It may also be
used with a permanently mounted base and
extension post. The Side Entry System features
flexible setup options and a fully articulating boom
system. It is fully adaptable to an infinite number of
manway designs and surrounding configurations.
11231
Winch Mount Brackets: The Large & Small Winch Mount Brackets are used in combination with different
winch/SRL mount brackets to mount different combinations of UCL winches and non-UCL winches/SRL’s. Call UCL
and speak to a technical sales representative for assistance.
Price Part # Description
14909 Large Winch Mount Bracket Weight: 2 lbs (.91 Kg)
11832 Small Winch Mount Bracket Weight: 2 lbs (.91 Kg)
*Please refer to the UCL Winches, Brackets & SRLs catalogue (Pt: 19398) for more information about
winches & optional brackets that can be used to outfit this unit.
14909
Price Part # Description
11233 Side Entry System Package for use with
external adjustable tank collar or permanently mounted
bases, as shown above (Digital Winch sold separately).
Total Weight: 69 lbs (31.3 Kg)11233
Side Entry System Portable Mount Application Features
Tank Pod System: The UCL Tank Pod System is designed to mount to tank
manways with existing hardware for securing hatch covers. The Tank Pod
mounts to manway flanges on bolt circle diameters from 19" to 36", with studs
from 1/2"NC to 3/4"NC. Three independently adjustable legs accommodate
flange inclinations to a maximum of 45 degrees. The unit can be set up in an
overhead clearance of only 25". Lightweight anodized aluminum construction
with plastic inserts at all bearing points reduce the possibility of vessel
contamination and simplify equipment cleaning. Zinc-plated steel hardware
resists corrosion. The Tank Pod can be fitted with a variety of UCL winches,
ladder systems, and fall-arrest devices to meet any application requirement.
Please refer to the UCL Winches, Brackets & SRLs catalogue (Pt:
19398) for more information about winches and bracket options needed
to outfit this unit.
Price Part # Description
13700 UCL Tank Pod System (Digital Winch not included)
13734 Carrying Bag for UCL Tank Pod
Weight: 38 lbs (17.2 Kg)
*Shown with UCL Digital
Winch and Winch Mounting
Bracket, sold separately.
UCL Tank Pod Equipment Cart: The UCL Tank Pod Equipment Cart is ideal for transporting your UCL Tank Pod to
and from the work site with ease. The cart features a powder-coated finish and can accommodate winches, mast
extensions and standard sized toolboxes.
Price Part # Description
15982 Wheel Cart for UCL Tank Pod
Weight: 25 lbs (11.3 Kg)
15982
13700
Mast Extension for UCL Tank Pod: This mast extension is designed to install on top of the tank pod to increase the
overall lifting height and anchor point approximately 24”. Custom mast extensions are available. Call for details.
Price Part # Description
16012 24” Mast Extension for the UCL Tank Pod
Weight: 10 lbs (4.5 Kg)
Stainless Steel Multiple Angle 3/4” Weld-On Studs: The Weld-on stud adapters are manufactured out of 304
stainless steel. These studs are designed to be welded onto stainless steel tanks to offer a point of attachment for the
tankpod where existing studs and hardware do not exist.
Price Part # Description
15981 Stainless Steel Multiple Angle 3/4” Weld-On Studs (set of 3)
Weight: 8 lbs (3.6 Kg)
15981
Mounting Stud Extension Adapters: The UCL stud extension adapters are designed to allow the tank pod to adapt
to existing hardware on a tank. The female end of the adapter secures to different diameter studs ranging from 1/2” to
3/4.” The male end of the adapter secures to the bottom end of the tank pod foot pads.
Price Part # Description
15299 1/2” NC - 5/8” NC Mounting Stud Extension Adapter (set of 3)
Weight: 1.5 lbs (.68 Kg)
15300 5/8” NC - 5/8” NC Mounting Stud Extension Adapter (set of 3)
Weight: 1.5 lbs (.68 Kg)
15301 3/4” NC - 5/8” NC Mounting Stud Extension Adapter (set of 3)
Weight: 1.5 lbs (.68 Kg)
16012
15299
24”
(610 mm)
Tank Pod System Features & Specifications