Entamoeba hartmanni : (A) trofozoíto en MIF (5-12 µm); (B) quiste inmaduro con Lugol (5-10 µm).
RUBÍ OPTIM 2 - europerfil.com · RUBÍ OPTIM 2 Coating (35 µm) Primer (25 µm) Z or Z-Al-Mg Steel...
Transcript of RUBÍ OPTIM 2 - europerfil.com · RUBÍ OPTIM 2 Coating (35 µm) Primer (25 µm) Z or Z-Al-Mg Steel...
OFICINAS CENTRALES Avda. de la Granvía, 179 - Polígono Industrial Granvía Sur
08908 L’HOSPITALET DE LLOBREGAT (ESPAÑA) + 34 93 261 63 33 - +34 93 261 63 38 - www.europerfil.es
Revisión 3 12/2017 Europerfil se reserva el derecho de modificar sin previo aviso cualquiera de las características aquí referenciadas.
RUBÍ OPTIM 2
Revestimiento (35 µm)
Imprimación (25 µm)
Z o Z-Al-Mg
Acero
Z o Z-Al-Mg
Imprimación (25 µm)
Revestimiento (35 µm)
Normativa aplicable:
Materia prima según UNE-EN 10346
Revestimiento orgánico según XP P 34.301 y UNE-EN 10169
DESCRIPCIÓN GENERAL DEL REVESTIMIENTO ORGÁNICO
PRESTACIONES DEL REVESTIMIENTO
▪ Especialmente adaptado a los colores metalizados
▪ Excelente resistencia a los agentes químicos
▪ Excelente resistencia a la corrosión
▪ Excelente resistencia a los rayos ultravioleta
▪ Excelente resistencia a la abrasión y a la erosión
▪ Excelente estabilidad de color y aspecto
▪ Muy buena flexibilidad
▪ Autolimpiable
ÁMBITO DE APLICACIÓN
▪ Edificios de prestigio: cubiertas y fachadas en las que se requiere una excepcional durabilidad del color. Aplicable en ambientes industriales o urbanos intensos, con gran exposición al sol, con agresión por vientos de arena y en ambientes marinos.
CLASE Ambiente interior Clase Vc – Categoría CPI5 Según normas XP P 34.301 y
UNE-EN 10169 Ambiente exterior Clase VI
DESCRIPCIÓN
Composición Recto 25 µm de imprimación + 35 µm de acabado
Verso Back coat
Opciones Diamante Excel o esmeralda excel cara interior
Brillo 30 UB
PROPIEDADES
Dureza Resistencia rayado: HB-H Reacción frente al fuego
Clase M: M1
Abrasión Chorro de arena: 120 litros Euroclase piel simple: F
Taber: 25 mg
Resistencia a agentes químicos
Ácidos y bases: Muy bueno
Flexibilidad Plegado: 2T Aceites minerales: Muy bueno
Corrosión
Niebla salina: 500 horas Solventes alifáticos: Muy bueno
Test tropical: 1500 horas Solventes aromáticos: Muy bueno
Clasificación resistencia: RC4 Solventes con acetona: Muy bueno
Brillo del color Resistencia U.V.: RUV4// ∆E ≤ 2, GR ≥ 80%
Solventes con cloro: Muy bueno
HEAD QUARTERS Avda. de la Granvía, 179 - Polígono Industrial Granvía Sur
08908 L’HOSPITALET DE LLOBREGAT (SPAIN) + 34 93 261 63 33 - +34 93 261 63 38 - www.europerfil.es
Revision 3 12/2017 Europerfil reserves the right to change without prior notice any of the references here.
RUBÍ OPTIM 2
Coating (35 µm)
Primer (25 µm)
Z or Z-Al-Mg
Steel
Z or Z-Al-Mg
Primer (25 µm)
Coating (35 µm)
Applicable norms:
Raw material according to UNE-EN 10346
Organic coating according to
XP P 34.301 and UNE-EN 10169
GENERAL DESCRIPTION OF THE ORGANIC COATING
PERFORMANCE
▪ Specially adapted to metallic colors
▪ Excellent chemical resistance
▪ Excellent resistance to corrosion
▪ Excellent UV resistance
▪ Excellent resistance to abrasion and erosion
▪ Excellent stability of color and appearance
▪ Very good flexibility
▪ Self-cleaning
FIELD OF APPLICATION ▪ Prestige buildings: roofs and facades which require exceptional durability of
color. Applicable for intensive industrial or urban environment, with strong exposure to the sun or to sand storms and in marine environment.
CLASS Interior ambience Class Vc – Category CPI5 According to the norms XP P
34.301 and UNE-EN 10169 Exterior ambience Class VI
DESCRIPTION
Composition Recto 25 µm of primer + 35 µm of coating
Verso Back coat
Options Available Diamante Excel or Esmeralda Excel for interior sheet
Brightness 30 UB
PROPERTIES
Hardness Scratch resistance test: HB-H Fire reaction
Class M: M1
Abrasion Sand blasting test: 120 liter Euroclass simple skin: F
Stiffness test: 25 mg
Chemical resistance
Acids and bases: Very good
Flexibility Folded: 2T Mineral oils: Very good
Corrosion
Salt spray test: 500 hours Aliphatic solvents: Very good
Tropical test: 1500 hours Aromatic solvents: Very good
Resistance classification: RC4 Acetone solvents: Very good
Color brightness
U.V. resistance: RUV4// ∆E ≤ 2, GR ≥ 80%
Chlorinated solvents: Very good
SIÉGE SOCIAL Avda. de la Granvía, 179 - Polígono Industrial Granvía Sur
08908 L’HOSPITALET DE LLOBREGAT (ESPAGNE) + 34 93 261 63 33 - +34 93 261 63 38 - www.europerfil.es
Révision 3 12/2017 Europerfil se réserve le droit de modifier sans préavis toute donnée indiquée dans ce document
RUBÍ OPTIM 2
Finition (35 µm)
Primaire (25 µm)
Z ou Z-Al-Mg
Acier
Z ou Z-Al-Mg
Primaire (25 µm)
Finition (35 µm)
Normes en vigueur:
Métal support selon norme UNE-EN 10346
Revestimiento orgánico según XP P 34.301 et UNE-EN 10169
DESCRIPTION GÉNÉRALE DU REVÊTEMENT ORGANIQUE
CARACTÉRISTIQUES DU REVÊTEMENT
▪ Spécialement adapté aux teintes métallisées
▪ Excellente résistance aux agents chimiques
▪ Excellente résistance à la corrosion
▪ Excellente résistance aux ultra-violets
▪ Excellente résistance à l’abrasion et à l’érosion
▪ Excellente stabilité de teinte et d’aspect
▪ Très bonne souplesse
▪ Auto-nettoyant
SECTEUR D’APPLICATION
▪ Bâtiments de prestige : Toitures et façades qui nécessitent une durabilité exceptionnelle de la couleur. Applicable dans les environnements intenses industriels ou urbains, avec une exposition grande au soleil, a l’agression par les environnements les tempêtes de sable et marines.
CLASSE Ambiance intérieur Classe Vc – Catégorie CPI5 Selon normes XP P 34.301
et UNE-EN 10169 Ambiance extérieur Clase VI
DESCRIPTION
Composition Recto 25 µm de primaire + 35 µm de finition
Verso Envers de bande
Possibilités Diamante Excel ou esmeralda excel feuille intérieur
Brillance 30 UB
PROPRIÉTÉS
Dureté de la peinture
Dureté crayon: HB-H Réaction au feu
Classe M: M1
Abrasion Au et de sable: 120 litres Euroclasse simple peau: F
Taber: 25 mg
Résistance aux agents chimiques
Acides et bases: Très bon
Flexibilité Pliage: 2T Huiles minérales: Très bon
Corrosion
Brouillard salin: 500 heures Solvants aliphatiques: Très bon
Tropical test: 1500 heures Solvants aromatiques: Très bon
Classification de la résistance:
RC4 Solvants cétoniques: Très bon
Brillance Résistance U.V.: RUV4// ∆E ≤ 2, GR ≥ 80%
Solvants chlorés: Très bon