Pruebas Holdreboot
-
Upload
anthony-chavez -
Category
Documents
-
view
215 -
download
0
Transcript of Pruebas Holdreboot
-
8/10/2019 Pruebas Holdreboot
1/8
-
8/10/2019 Pruebas Holdreboot
2/8
Power supply model : pem-3
Status : up
===============================================================================
A:LIM_LOLGD1_A7750# show version
TiMOS-C-8.0.R6 cpm/hops ALCATEL SR 7750 Copyright (c) 2000-2010 Alcatel-Lucent.
All rights reserved. All use subject to applicable license agreements.
Built on Thu Nov 11 20:27:48 PST 2010 by builder in /rel8.0/b1/R6/panos/main
2. Verificar el tipo de controladora del equipo
A:LIM_LOLGD1_A7750# show card
===============================================================================
Card Summary
===============================================================================
Slot Provisioned Equipped Admin Operational Comments
Card-type Card-type State State
-------------------------------------------------------------------------------
1 iom2-20g iom2-20g up up
2 iom3-xp iom3-xp up up
A sfm2-200g sfm2-200g up up/active
B sfm2-200g sfm2-200g up up/standby
===============================================================================
A:LIM_LOLGD1_A7750# show card detail
===============================================================================
Card 1
===============================================================================
Slot Provisioned Equipped Admin Operational Comments
Card-type Card-type State State-------------------------------------------------------------------------------
1 iom2-20g iom2-20g up up
IOM Card Specific Data
Clock source : none
Named Pool Mode : Disabled
Fail On Error : Disabled
Available MDA slots : 2
Installed MDAs : 2
Hardware DataPlatform type : 7750
Part number : 3HE01473AAAD01
CLEI code : IPUIAVADAA
Serial number : NS1034F0352
Manufacture date : 08182010
Manufacturing string :
Manufacturing deviations :
Manufacturing assembly number :
Administrative state : up
Operational state : up
Temperature : 52C
Temperature threshold : 75C
Software boot (rom) version : X-8.0.R6 on Thu Nov 11 20:12:05 PST 2010 by*
Software version : TiMOS-I-8.0.R6 iom/hops ALCATEL SR 7750 Cop*
-
8/10/2019 Pruebas Holdreboot
3/8
-
8/10/2019 Pruebas Holdreboot
4/8
===============================================================================
Slot Provisioned Equipped Admin Operational Comments
Card-type Card-type State State
-------------------------------------------------------------------------------
A sfm2-200g sfm2-200g up up/active
BOF last modified : N/A
Config file version : SAT OCT 18 06:40:09 2014 UTC
Config file last modified : N/A
Config file last saved : 2014/11/12 01:39:54
M/S clocking ref state : primary
Flash - cf1:
Administrative State : up
Operational state : not equipped
Flash - cf2:
Administrative State : upOperational state : not equipped
Flash - cf3:
Administrative State : up
Operational state : up
Serial number : 20100326049E872B872B
Firmware revision : 20081107
Model number : SMART CF
Size : 1,953 MB
Free space : 1,790 MB
Hardware Data
Platform type : 7750
Part number : 3HE01171AAAF02
CLEI code : IPUCAJMFAA
Serial number : NS1035F0138
Manufacture date : 08232010
Manufacturing string :
Manufacturing deviations :
Manufacturing assembly number :
Administrative state : up
Operational state : up
Temperature : 53C
Temperature threshold : 75C
Software boot (rom) version : X-8.0.R6 on Thu Nov 11 20:12:05 PST 2010 by*
Software version : TiMOS-C-8.0.R6 cpm/hops ALCATEL SR 7750 Cop*
Time of last boot : 2014/10/18 14:22:55
Current alarm state : alarm cleared
Base MAC address : 7c:20:64:4a:85:91
Memory capacity : 2,048 MB
===============================================================================
Card B
===============================================================================
Slot Provisioned Equipped Admin Operational Comments
Card-type Card-type State State
-------------------------------------------------------------------------------B sfm2-200g sfm2-200g up up/standby
-
8/10/2019 Pruebas Holdreboot
5/8
BOF last modified : N/A
Config file version :
Config file last modified : N/A
Config file last saved : N/A
M/S clocking ref state : secondary
Flash - cf1:
Administrative State : up
Operational state : not equipped
Flash - cf2:
Administrative State : up
Operational state : not equipped
Flash - cf3:
Administrative State : up
Operational state : upSerial number : 2010032704A2EFE5EFE5
Firmware revision : 20081107
Model number : SMART CF
Size : 1,953 MB
Free space : 1,875 MB
Hardware Data
Platform type : 7750
Part number : 3HE01171AAAF02
CLEI code : IPUCAJMFAA
Serial number : NS1035F0001
Manufacture date : 08252010
Manufacturing string :
Manufacturing deviations :
Manufacturing assembly number :
Administrative state : up
Operational state : up
Temperature : 50C
Temperature threshold : 75C
Software boot (rom) version : X-8.0.R6 on Thu Nov 11 20:12:05 PST 2010 by*
Software version : TiMOS-C-8.0.R6 cpm/hops ALCATEL SR 7750 Cop*
Time of last boot : 2014/10/18 14:23:03
Current alarm state : alarm cleared
Base MAC address : 7c:20:64:4a:a4:29
Memory capacity : 2,048 MB
===============================================================================
A:LIM_LOLGD1_A7750#
3.
Verificar que ambas controladoras se encuentre correctamente sincronizadas
A:LIM_LOLGD1_A7750# show redundancy synchronization
===============================================================================
Synchronization Information
===============================================================================
Standby Status : standby ready
Last Standby Failure : N/A
Standby Up Time : 2014/10/18 14:23:03
Standby Version : TiMOS-C-8.0.R6 cpm/hops ALCATEL SR 7750
-
8/10/2019 Pruebas Holdreboot
6/8
Copyright (c) 2000-2010 Alcatel-Lucent.
All rights reserved. All use subject to
applicable license agreements.
Built on Thu Nov 11 20:27:48 PST 2010 by
builder in /rel8.0/b1/R6/panos/main
Failover Time : N/A
Failover Reason : N/ABoot/Config Sync Mode : Configuration
Boot/Config Sync Status : Config only synchronized
Last Config File Sync Time : 11/12/2014 01:39:55
Last Boot Env Sync Time : Never
===============================================================================
Es importante que en la lnea resaltada en rojo figure All boot environment
synchronized por lo cual ejecutamos el comando:
A:LIM_LOLGD1_A7750# admin redundancy synchronize boot-env
Syncing boot environment:
boot option file : cf3:\bof.cfg ... OKboot loader : cf3:\boot.ldr ... OK
primary config : cf3:\LIM_LOLGD1_A7750.cfg ... OK
primary config : cf3:\LIM_LOLGD1_A7750.ndx ... OK
primary image : cf3:\TiMOS-8.0.R6\cpm.tim ... OK
primary image : cf3:\TiMOS-8.0.R6\iom.tim ... OK
primary image : cf3:\TiMOS-8.0.R6\isa-aa.tim ... OK
Waiting for standby to read new BOF.CFG ... OK
Completed.
A:LIM_LOLGD1_A7750# show redundancy synchronization
===============================================================================
Synchronization Information
===============================================================================
Standby Status : standby ready
Last Standby Failure : N/A
Standby Up Time : 2014/10/18 14:23:03
Standby Version : TiMOS-C-8.0.R6 cpm/hops ALCATEL SR 7750
Copyright (c) 2000-2010 Alcatel-Lucent.
All rights reserved. All use subject to
applicable license agreements.
Built on Thu Nov 11 20:27:48 PST 2010 by
builder in /rel8.0/b1/R6/panos/main
Failover Time : N/A
Failover Reason : N/A
Boot/Config Sync Mode : Configuration
Boot/Config Sync Status : All boot environment synchronized
Last Config File Sync Time : 11/12/2014 01:39:55
Last Boot Env Sync Time : 11/12/2014 12:33:21
===============================================================================
*A:LIM_LOLGD1_A7750#
4. Proceder a reiniciar la controladora en stand-by (agregando la palabra hold)
# admin reboot standby hold
5.
Verificar el funcionamiento y monitorear por 5 minutos
# show card
-
8/10/2019 Pruebas Holdreboot
7/8
6.
Proceder a reiniciar la controladora en stand-by (para que regrese al funcionamiento
normal)
# admin reboot standby
7.
Verificar que levante y quede en stand-by
Informacin Extra
Encontr el siguiente comando disponible desde release 12 (entiendo que se realizar el upgrade de
los 7750SR de Claro a 12.0R4 pronto) , el cual me parece es til para el proceso de TS:
# admin reboot standby hold
hold Administratively hold a rebooted standby CPM from coming back online. This may be usefulfor troubleshooting purposes (e.g. standby SF/CPM is suspected of causing some system problems).
The CPM should not be left offline as the system does not have control redundancy while one CPM is
offline. The CPM must be rebooted again (without the 'hold' keyword) to return it to service.
La verificacin que tendramos que revisar seria si el comando es compatible con los tipos de
procesadoras desplegados en Claro:
Controladora/Tipo de Chassis 7750-SR12 7750-SR7 7750-SRc12
Total
general
53 16 16
200g CPM / Switch Fabric 2 70 70
250g CPM / Switch Fabric 3 8 8
400g CPM / Switch Fabric 2 20 6 26
7750-SRc12 CFM-XP 40 40
Total general 20 84 56 160
Aunque tambin entiendo que una opcin adicional seria disponer de un comando que le permita
elegir al cliente si desea tener redundancia en las switch-fabrics de manera similar a la
redundancia de las CPMs (active/stand-by) o trabajar en el modo active/active a nivel de switch-
fabrics segn sus necesidades.
-
8/10/2019 Pruebas Holdreboot
8/8