Intervalos de Mantenimiento 966h
-
Upload
jesuspacco -
Category
Documents
-
view
225 -
download
0
Transcript of Intervalos de Mantenimiento 966h
-
8/13/2019 Intervalos de Mantenimiento 966h
1/4
Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 966H WHEEL LOADER A6J
Configuration: 966H WHEEL LOADER A6J01801-UP (MACHINE) POWERED BY C11
Operation and Maintenance Manual966H and 972H Wheel LoadersMedia Number -SEBU7887-18 Publication Date -01/04/2012 Date Updated -16/04/2012
i04876450
Maintenance Interval Schedule
SMCS -7000
Ensure that all safety information, warnings, and instructions are read and understood before anyoperation or any maintenance procedures are performed.
The user is responsible for the performance of maintenance. All adjustments, the use of properlubricants, fluids, filters, and the replacement of components due to normal wear and aging areincluded. Failure to adhere to proper maintenance intervals and procedures may result indiminished performance of the product and/or accelerated wear of components.
Use mileage, fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST,
in order to determine the maintenance intervals. Products that operate in severe operatingconditions may require more frequent maintenance. Refer to the maintenance procedure for anyother exceptions that may change the maintenance intervals.
Note: The aftertreatment system can be expected to function properly for the useful life of theengine (emissions durability period), as defined by regulation. All prescribed maintenancerequirements must be followed.
Note: Before each consecutive interval is performed, all maintenance from the previous intervalmust be performed.
Note: If Cat HYDO Advanced hydraulic oils are used, the hydraulic oil change interval isextended substantially. SOS services may extend the oil change even longer. Consult your Catdealer for details.
The following guidlines shoud be followed if the service hours are not met:
Items listed between 10 and 100 service hours should be performed at least every 3 months.
Items listed between 250 and 500 service hours should be performed at least every 6 months.
Items listed between 1000 service hours and 2500 service hours should be performed at leastevery year.
Pgina 1 de 4966H WHEEL LOADER A6J01801-UP (MACHINE) POWERED BY C11(XEBP...
01/06/2012https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
-
8/13/2019 Intervalos de Mantenimiento 966h
2/4
When Required
Automatic Lubrication Grease Tank - FillBattery or Battery Cable - Inspect/ReplaceBucket Cutting Edges - Inspect/ReplaceBucket Hinge and Lift Arm Clearance Shims - Inspect/Adjust/Replace
Bucket Tips - Inspect/ReplaceCamera - CleanCircuit Breakers - ResetEngine Air Filter Primary Element - Clean/ReplaceEngine Air Filter Secondary Element - ReplaceEther Starting Aid Cylinder - ReplaceFuel System - PrimeFuses - ReplaceHigh Intensity Discharge Lamp (HID) - ReplaceOil Filter - InspectPallet Fork - InspectRadiator Core - CleanRide Control Accumulator - CheckSecondary Steering - TestWindow Washer Reservoir - FillWindow Wiper - Inspect/Replace
Every 10 Service Hours or Daily
Backup Alarm - TestCooling System Coolant Level - CheckEngine Oil Level - Check
Fuel System Primary Filter (Water Separator) - DrainHydraulic System Oil Level - CheckQuick Coupler - CheckSeat Belt - InspectTransmission Oil Level - CheckWindows - Clean
Every 50 Service Hours or Weekly
Bucket Lower Pivot Bearings - LubricateCab Air Filter - Clean/Replace
Fuel Tank Water and Sediment - DrainTire Inflation - Check
Every 100 Service Hours or 2 Weeks
Axle Oscillation Bearings - LubricateBucket Linkage and Loader Cylinder Bearings - LubricateBucket Upper Pivot Bearings - LubricateLogging Fork Clamp - LubricateSteering Cylinder Bearings - Lubricate
Pgina 2 de 4966H WHEEL LOADER A6J01801-UP (MACHINE) POWERED BY C11(XEBP...
01/06/2012https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
-
8/13/2019 Intervalos de Mantenimiento 966h
3/4
Initial 250 Service Hours
Electronic Unit Injector - Inspect/AdjustEngine Oil Sample - ObtainEngine Valve Lash - CheckEngine Valve Rotators - Inspect
Transmission Oil Filter - Replace
Every 250 Service Hours
Drive Shaft Support Bearing - Lubricate
Every 250 Service Hours or Monthly
Battery - CleanBelt - Inspect/Adjust/ReplaceBrake Accumulator - Check
Braking System - TestCooling System Coolant Sample (Level 1) - ObtainDifferential and Final Drive Oil Level - CheckDrive Shaft Spline (Center) - LubricateEngine Crankcase Breather - CleanEngine Oil Sample - ObtainQuick Coupler - Lubricate
Every 250 Service Hours or 3 Months
Engine Oil and Filter - Change
Pallet Fork - LubricateSteering Column Play - Check
Initial 500 Hours (for New Systems, Refilled Systems, and Converted Systems)
Cooling System Coolant Sample (Level 2) - Obtain
Every 500 Service Hours
Transmission Oil Filter - Replace
Every 500 Service Hours or 3 Months
Differential and Final Drive Oil Sample - ObtainEngine Oil and Filter - ChangeFuel System Primary Filter (Water Separator) Element - ReplaceFuel System Secondary Filter - ReplaceFuel Tank Cap and Strainer - CleanHydraulic System Biodegradable Oil Filter Element - ReplaceHydraulic System Oil Filter - ReplaceHydraulic System Oil Sample - Obtain
Transmission Oil Sample - Obtain
Pgina 3 de 4966H WHEEL LOADER A6J01801-UP (MACHINE) POWERED BY C11(XEBP...
01/06/2012https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
-
8/13/2019 Intervalos de Mantenimiento 966h
4/4
Every 1000 Service Hours
Drive Shaft Universal Joints - Lubricate
Every 1000 Service Hours or 6 Months
Articulation Bearings - LubricateBattery Hold-Down - TightenRoading Fender Hinges - LubricateRollover Protective Structure (ROPS) - InspectSteering Pilot Oil Screen (Command Control Steering) - Clean/ReplaceTransmission Oil - Change
Every 2000 Service Hours or 1 Year
Brake Discs - CheckDifferential and Final Drive Oil - Change
Electronic Unit Injector - Inspect/AdjustEngine Valve Lash - CheckEngine Valve Rotators - InspectHood Tilt Actuator - LubricateHydraulic System Oil - ChangeHydraulic Tank Breaker Relief Valve - CleanService Brake Wear Indicator - CheckSteering Column Spline (Command Control Steering) - Lubricate
Every Year
Cooling System Coolant Sample (Level 2) - ObtainReceiver Dryer (Refrigerant) - Replace
Every 3000 Service Hours
Steering Column Spline (HMU Steering) - Lubricate
Every 3 Years
Seat Belt - Replace
Every 6000 Service Hours or 3 Years
Cooling System Coolant Extender (ELC) - AddCooling System Water Temperature Regulator - Replace
Every 12 000 Service Hours or 6 Years
Cooling System Coolant (ELC) - Change
Copyright 1993 - 2012 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Jun 1 10:28:09 EST 2012
Pgina 4 de 4966H WHEEL LOADER A6J01801-UP (MACHINE) POWERED BY C11(XEBP...
01/06/2012https://sisweb cat com/sisweb/sisweb/techdoc/techdoc print page jsp?returnurl=/sisw