CTA-V CTA-VR CTA-MVModelo seleccionado, CTA-5-VR. Velocidad de paso de aire por la batería, 2.2...
Transcript of CTA-V CTA-VR CTA-MVModelo seleccionado, CTA-5-VR. Velocidad de paso de aire por la batería, 2.2...
�
Serie CTA-VR Profundidad ReducidaCTA-VR Series Reduced Depth
Características Técnicas
Climatizadores VERTICALES de profundidad reducida, para caudales de aire de 2.500 a 10.000 m3/h en seis modelos normalizados.
Envolvente formada por perfil especial de tubo galvanizado y escuadras de unión de aluminio inyectado, formando una estructura rígida y compacta.
Construcción STANDARD con panel sandwich de plancha galvanizada y lacada en el exterior, aislamiento térmico a base de espuma de poliuretano inyectado y plancha galvanizada en el interior.
Construcción INSONORIZADA con panel sandwich compuesto por plancha lacada en el exterior, aislamiento térmico y acústico compuesto por fibra de vidrio de densidad 50 kg/m3 y plancha galvanizada en el interior, perforada en la zona del ventilador. Ventilador seleccionado a bajo régimen de revoluciones. Opcional, absorvente acústico de gran capacidad en la sección de ventilación.
Versiones para VOLUMEN DE AIRE VARIABLE con ventiladores de motor incorporado, rotor externo, regulación de caudal 0 a 100%.
Posibilidad de incorporar sección de Enfriamiento Gratuito con ventilador de retorno y sistema de compuertas.
Technical characteristics
REDUCED DEPTH VERTICAL air conditioners for airflows of 2,500 to 10,000 m3/h, in six standardised models.
Housing made up of a special profile of galvanised tube and injected aluminium joining brackets forming a rigid and compact structure.
STANDARD construction with a galvanised and lacquered sheet sandwich panel on the outside, injected foam based polyurethane thermal insulator and galvanised metal sheet on the inside.
SOUND PROOFED construction comprising of an outer lacquered metal sheet sandwich panel, thermal and sound proofing insulation comprising of fiberglass with a density of 50 kg/m3 and an inner galvanised metal sheet perforated in the area of the fan. Fan selected working at low revolutions. Optional high capacity acoustic absorbent in the fan section.
VARIABLE AIR VOLUME versions with motor fans incorporated, external rotor, flow regulation from o to 100%.
Possibility of incorporating the Free Cooling section with a return fan and mixing damper system.
Climatizadores verticalesVertical air conditioners
CTA-VR
�
Ejemplo de selección
1.- Datos de partida:
Caudal de aire 5.000 m3/h P.e.d. 150 PaPotencia frigorífica total 42 kW T.e. aire 27°C 60%H.R.Potencia frigorífica sensible 23 kWPotencia calorífica 35 kW T.e. aire 10°CT. agua fría 7/12 °C T. agua caliente 45/40 °C
2.- Indicar los componentes que conforman la unidad:
Sección de mezclaFiltros G-4Batería de fríoBatería de calorVentilador de impulsión
3.- Determinar el MODELO en función del caudal de aire, según se muestra en el Gráfico 1.
Modelo seleccionado, CTA-5-VR. Velocidad de paso de aire por la batería, 2.2 m/s.
4.- Seleccionar el tipo de batería de frío y calor según las tablas correspondientes al modelo determinado y de acuerdo con las prestaciones requeridas.
Batería de frío seleccionada, tipo 5. Capacidad total 43.38 kW, sensible 24.4 kWBatería de calor seleccionada, tipo 3. Capacidad 37.96 kW.
Selection example
1.- Starting data:
Air flow 5.000 m3/h S.e.p. 150 PaTotal refrigeration capacity 42 kW I.air temp. 27°C 60%H.R.Refrigeration sensitivity capacity 23 kWCalorific capacity 35 kW I.air temp. 10°CCold water temp. 7/12 °C Hot water temp. 45/40 °C
2.- Indicate the components that make up the unit:
Mixing sectionG-4 filtersCold coilHeat coilDrive fan
3.- Determine the MODEL depending on the air flow as shown in Illustration 1.
Model selected, CTA-5-VR. Air flow speed per coil, 2.2 m/s.
4.- Select the type of cold and hot coil according to the tables corresponding to the required model and according to the required performance.
Cold coil selected, type 5. Total capacity 43.38 kW, sensitivity 24.4 kWHot coil selected, type 3. Capacity 37.96 kW.
CAUDAL DE AIRE m3/h.- 1/sg.AIR FLOW m3/h.- I/s.
1) caudal de aire1) air flow vol. 2.0 m/s
2) caudal de aire2) air flow vol. vol. 2.2 m/s
3) caudal de aire3) air flow vol. vol. 2.5 m/s
Ejemple de selecciónSelection example
�
EspecificacionesSpecifications
PRESTACIONES VENTILADORES / FANS PERFORMANCECaudal nominal / Nominal flow: 3000 m3/h Pres. est. Disp. / Static ext. Pressure: 150 PaPotencia Motor / Motor Power: 0,75 Kw 1450 r.p.m 220 / 380 V. 2,30 A
PRESTACIONES BATERÍAS Y REFRIGERACIÓN / COILS AND COOLING PERFORMANCECAUDAL DE AIRE / AIR FLOW POTENCIA / CAPACITY (Kw)
T. Ent. Aire Tipo � / Type 4 Tipo 5 / Type 5 Tipo 6 / Type 6 I. Air Temp.
m�/h I/s °C / % HR Sensible Total Sensible Total Sensible Total
3000 833 25/55 12,51 17,16 13,77 20,25 15,27 22,80 3000 833 27/60 13,65 23,85 14,85 26,40 16,08 30,33 3000 833 32/68 15,60 39,00 18,00 44,70 21,00 49,50
TEMPERATURA DE AGUA / WATER TEMPERATURE 7 / 12 °C
∆P Lado agua (m.c.a.) / ∆P water 1,90 2,00 2,20
PRESTACIONES CALEFACCIÓN / HEATING PERFORMANCECAUDAL DE AIRE / AIR FLOW POTENCIA / CAPACITY (Kw)
T. Ent. Aire Tipo � / Type 4 Tipo � / Type 2 I. Air Temp.
m�/h I/s °C
3000 833 0 33,48 33,30 3000 833 10 26,10 28,20 3000 833 20 18,60 24,00
TEMPERATURA DE AGUA / WATER TEMPERATURE 45 / 40 °C 75 / 60 °C
∆P Lado agua (m.c.a.) / ∆P water 1,10 1,40
PESO / WEIGHT (Kg.)Construcc. Standard / Standard Construct. �19Construcc. Acústica / Acoustic Construct. �56
Disponible con conexión derecha o izquierdaAvailable with right or left connection
CTA
-3-V
CTA
-3-V
R
9040
210
1230
680
270230 80
580
2250
1570
40 500 40
= 305 =
1030
40 950 40
580
230 270 80
9040
500
1190
1820
5
PRESTACIONES VENTILADORES / FANS PERFORMANCECaudal nominal / Nominal flow: 4000 m3/h Pres. est. Disp. / Static ext. Pressure: 150 PaPotencia Motor / Motor Power: 1,10 Kw 1450 r.p.m 220 / 380 V. 2,80 A
PRESTACIONES BATERÍAS Y REFRIGERACIÓN / COILS AND COOLING PERFORMANCECAUDAL DE AIRE / AIR FLOW POTENCIA / CAPACITY (Kw)
T. Ent. Aire Tipo � / Type 4 Tipo 5 / Type 5 Tipo 6 / Type 6 I. Air Temp.
m�/h I/s °C / % HR Sensible Total Sensible Total Sensible Total
4100 1139 25/55 17,10 23,45 18,82 27,68 20,87 31,16 4100 1139 27/60 18,66 32,60 20,30 36,08 21,98 41,45 4100 1139 32/68 21,32 53,30 24,60 61,09 28,70 67,65
TEMPERATURA DE AGUA / WATER TEMPERATURE 7 / 12 °C
∆P Lado agua (m.c.a.) / ∆P water 2,10 1,80 2,00
PRESTACIONES CALEFACCIÓN / HEATING PERFORMANCECAUDAL DE AIRE / AIR FLOW POTENCIA / CAPACITY (Kw)
T. Ent. Aire Tipo � / Type 4 Tipo � / Type 2 I. Air Temp.
m�/h I/s °C
4100 1139 0 45,76 45,51 4100 1139 10 35,67 38,54 4100 1139 20 25,42 32,80
TEMPERATURA DE AGUA / WATER TEMPERATURE 45 / 40 °C 75 / 60 °C
∆P Lado agua (m.c.a.) / ∆P water 1,20 1,40
PESO / WEIGHT (Kg.)Construcc. Standard / Standard Construct. �57Construcc. Acústica / Acoustic Construct. �0�
9040
210
1230
780
295205 80
580
2350
1570
40 500 40
= 340 =
1230
40 1150 40
580
205 295 80
9040
500
1190
1820
CTA
-4-V
R
CTA
-4-V
Disponible con conexión derecha o izquierdaAvailable with right or left connection
6
PRESTACIONES VENTILADORES / FANS PERFORMANCECaudal nominal / Nominal flow: 5000 m3/h Pres. est. Disp. / Static ext. Pressure: 150 PaPotencia Motor / Motor Power: 1,50 Kw 1450 r.p.m 220 / 380 V. 3,70 A
PRESTACIONES BATERÍAS Y REFRIGERACIÓN / COILS AND COOLING PERFORMANCECAUDAL DE AIRE / AIR FLOW POTENCIA / CAPACITY (Kw)
T. Ent. Aire Tipo � / Type 4 Tipo 5 / Type 5 Tipo 6 / Type 6 I. Air Temp.
m�/h I/s °C / % HR Sensible Total Sensible Total Sensible Total
4930 1369 25/55 20,56 28,20 22,63 33,28 25,09 37,47 4930 1369 27/60 22,43 39,19 24,40 43,38 26,42 49,84 4930 1369 32/68 25,64 64,09 29,58 73,46 34,51 81,35
TEMPERATURA DE AGUA / WATER TEMPERATURE 7 / 12 °C
∆P Lado agua (m.c.a.) / ∆P water 2,20 2,00 2,00
PRESTACIONES CALEFACCIÓN / HEATING PERFORMANCECAUDAL DE AIRE / AIR FLOW POTENCIA / CAPACITY (Kw)
T. Ent. Aire Tipo � / Type 4 Tipo � / Type 2 I. Air Temp.
m�/h I/s °C
4930 1369 0 55,02 54,72 4930 1369 10 42,89 46,34 4930 1369 20 30,57 39,44
TEMPERATURA DE AGUA / WATER TEMPERATURE 45 / 40 °C 75 / 60 °C
∆P Lado agua (m.c.a.) / ∆P water 1,10 1,40
PESO / WEIGHT (Kg.)Construcc. Standard / Standard Construct. �9�Construcc. Acústica / Acoustic Construct. ��0
9040
210
1280
730
270280 80
630
2350
1620
40 550 40
= 840 =
1530
40 1450 40
630
280 270 80
9040
600
1140
1870
CTA
-5-V
R
CTA
-5-V
Disponible con conexión derecha o izquierdaAvailable with right or left connection
7
PRESTACIONES VENTILADORES / FANS PERFORMANCECaudal nominal / Nominal flow: 6000 m3/h Pres. est. Disp. / Static ext. Pressure: 150 PaPotencia Motor / Motor Power: 1,50 Kw 1450 r.p.m 220 / 380 V. 3,70 A
PRESTACIONES BATERÍAS Y REFRIGERACIÓN / COILS AND COOLING PERFORMANCECAUDAL DE AIRE / AIR FLOW POTENCIA / CAPACITY (Kw)
T. Ent. Aire Tipo � / Type 4 Tipo 5 / Type 5 Tipo 6 / Type 6 I. Air Temp.
m�/h I/s °C / % HR Sensible Total Sensible Total Sensible Total
5910 1642 25/55 24,64 33,81 27,13 39,89 30,08 44,92 5910 1642 27/60 26,89 46,98 29,25 52,01 31,68 59,75 5910 1642 32/68 30,73 76,83 35,46 88,06 41,37 97,52
TEMPERATURA DE AGUA / WATER TEMPERATURE 7 / 12 °C
∆P Lado agua (m.c.a.) / ∆P water 1,80 2,00 1,70
PRESTACIONES CALEFACCIÓN / HEATING PERFORMANCECAUDAL DE AIRE / AIR FLOW POTENCIA / CAPACITY (Kw)
T. Ent. Aire Tipo � / Type 4 Tipo � / Type 2 I. Air Temp.
m�/h I/s °C
5910 1642 0 65,96 65,60 5910 1642 10 51,42 55,55 5910 1642 20 36,64 47,28
TEMPERATURA DE AGUA / WATER TEMPERATURE 45 / 40 °C 75 / 60 °C
∆P Lado agua (m.c.a.) / ∆P water 1,40 1,30
PESO / WEIGHT (Kg.)Construcc. Standard / Standard Construct. ��5Construcc. Acústica / Acoustic Construct. �75
9040
210
1480
630
270280 80
630
2450
1820
40 550 40
= 840 =
1530
40 1450 40
630
280 270 80
9040
600
1090
1820
CTA
-6-V
CTA
-6-V
R
Disponible con conexión derecha o izquierdaAvailable with right or left connection
�
PRESTACIONES VENTILADORES / FANS PERFORMANCECaudal nominal / Nominal flow: 8000 m3/h Pres. est. Disp. / Static ext. Pressure: 150 PaPotencia Motor / Motor Power: 2,20 Kw 1450 r.p.m 220 / 380 V. 5,50 A
PRESTACIONES BATERÍAS Y REFRIGERACIÓN / COILS AND COOLING PERFORMANCECAUDAL DE AIRE / AIR FLOW POTENCIA / CAPACITY (Kw)
T. Ent. Aire Tipo � / Type 4 Tipo 5 / Type 5 Tipo 6 / Type 6 I. Air Temp.
m�/h I/s °C / % HR Sensible Total Sensible Total Sensible Total
7760 2156 25/55 32,36 44,39 35,62 52,38 39,50 58,98 7760 2156 27/60 35,31 61,69 38,41 68,29 41,59 78,45 7760 2156 32/68 40,35 100,88 46,56 115,62 54,32 128,04
TEMPERATURA DE AGUA / WATER TEMPERATURE 7 / 12 °C
∆P Lado agua (m.c.a.) / ∆P water 1,80 2,00 1,70
PRESTACIONES CALEFACCIÓN / HEATING PERFORMANCECAUDAL DE AIRE / AIR FLOW POTENCIA / CAPACITY (Kw)
T. Ent. Aire Tipo � / Type 4 Tipo � / Type 2 I. Air Temp.
m�/h I/s °C
7760 2156 0 86,60 86,14 7760 2156 10 67,51 72,94 7760 2156 20 48,11 62,08
TEMPERATURA DE AGUA / WATER TEMPERATURE 45 / 40 °C 75 / 60 °C
∆P Lado agua (m.c.a.) / ∆P water 1,30 1,40
PESO / WEIGHT (Kg.)Construcc. Standard / Standard Construct. �09Construcc. Acústica / Acoustic Construct. �75
9040
310
1330
680
295355 80
730
2450
1770
40 650 40
= 920 =
1780
40 1700 40
C
B
D
730
355 295 80
9040
550
1190
1870
CTA
-8-V
R
CTA
-8-V
Disponible con conexión derecha o izquierdaAvailable with right or left connection
9
PRESTACIONES VENTILADORES / FANS PERFORMANCECaudal nominal / Nominal flow: 10000 m3/h Pres. est. Disp. / Static ext. Pressure: 150 PaPotencia Motor / Motor Power: 3,00 Kw 1450 r.p.m 220 / 380 V. 7,00 A
PRESTACIONES BATERÍAS Y REFRIGERACIÓN / COILS AND COOLING PERFORMANCECAUDAL DE AIRE / AIR FLOW POTENCIA / CAPACITY (Kw)
T. Ent. Aire Tipo � / Type 4 Tipo 5 / Type 5 Tipo 6 / Type 6 I. Air Temp.
m�/h I/s °C / % HR Sensible Total Sensible Total Sensible Total
9850 2736 25/55 41,07 56,34 45,21 66,59 50,14 74,86 9850 2736 27/60 44,82 78,31 48,76 86,68 52,80 99,58 9850 2736 32/68 51,22 128,05 59,10 146,77 68,95 162,53
TEMPERATURA DE AGUA / WATER TEMPERATURE 7 / 12 °C
∆P Lado agua (m.c.a.) / ∆P water 2,20 2,00 1,80
PRESTACIONES CALEFACCIÓN / HEATING PERFORMANCECAUDAL DE AIRE / AIR FLOW POTENCIA / CAPACITY (Kw)
T. Ent. Aire Tipo � / Type 4 Tipo � / Type 2 I. Air Temp.
m�/h I/s °C
9850 2736 0 92,59 109,34 9850 2736 10 75,85 92,59 9850 2736 20 51,22 78,80
TEMPERATURA DE AGUA / WATER TEMPERATURE 45 / 40 °C 75 / 60 °C
∆P Lado agua (m.c.a.) / ∆P water 1,20 1,70
PESO / WEIGHT (Kg.)Construcc. Standard / Standard Construct. ���Construcc. Acústica / Acoustic Construct. 517
9040
310
1330
730
350330 80
780
2500
1770
40 700 40
= 870 =
1930
40 1850 40
780
350 350 80
9040
650
1140
1920
9040
310
1330
730
350330 80
780
2500
1770
40 700 40
= 870 =
1930
40 1850 40
CTA
-10-
VR
CTA
-10-
V
Disponible con conexión derecha o izquierdaAvailable with right or left connection
10
Serie CTA-MVCTA-MV Series
Características Técnicas
Climatizadores MULTIZONA VERTICALES, profundidad reducida, de dos o tres zonas, para caudales de 3.000 a 12.000 m3/h.
Diseñados para el acondicionamiento de un módulo con un solo CLIMATIZADOR y controles de temperatura independientes por zona, mediante baterías de refrigeración y/o calefacción individuales para cada zona.
Envolvente formada por perfil especial de tubo galvanizado y escuadras de unión de aluminio inyectado, formando una estructura rígida y compacta.
Construcción STANDARD con panel sandwich de plancha galvanizada y lacada en el exterior, aislamiento térmico a base de espuma de poliuretano inyectado y plancha galvanizada en el interior.
Construcción INSONORIZADA con panel sandwich compuesto por: plancha lacada en el exterior, aislamiento térmico y acústico compuesto por fibra de vidrio de densidad 50 kg/m3 y plancha galvanizada en el interior, perforada en la zona del ventilador. Ventilador seleccionado a bajo régimen de revoluciones. Opcional, absorvente de gran capacidad en la sección de ventilación.
Technical characteristics
VERTICAL MULTI-ZONE air conditioners, reduced depth, of two or three zones, for flows of 3,000 to 12,000 m3/h.
Designed for the air conditioning of one module with a single AIR CONDITIONER and independent temperature controls per zone, via individual refrigeration and/or heating coils for each zone.
Housing made up of a special profile of galvanised tube and joining brackets of injected aluminium forming a rigid and compact structure.
STANDARD construction with a galvanised and lacquered sheet sandwich panel on the outside, injected foam based polyurethane thermal insulator and galvanised metal sheet on the inside.
SOUND PROOFED construction comprising of an outer lacquered metal sheet sandwich panel, thermal and sound proofing insulation comprising of fibreglass with a density of 50 kg/m3 and an inner galvanised metal sheet perforated in the area of the fan. Fan selected working at low revolutions. Optional high capacity acoustic absorbent in the fan section.
Climatizadores multizona verticalesVertical multi-zone air conditioners
CTA-MV
11
Componentes serie CTA-MV / Components CTA-MV series
1.- ENTRADA / INPUT
2.- FILTROS / FILTERS
3.- VENTILADOR / FAN
4.- BATERÍAS / COILS
5.- SALIDA / OUTPUT
1.- ENTRADA / INPUT
�.- FILTROS / FILTERS
�.- VENTILADOR / FAN
�.- BATERÍAS / COILS
5.- SALIDA / OUTPUT
1�
1.- ENTRADAMódulo que permite la opción de incorporar dos compuertas para aire exterior y de retorno.
�.- FILTROSConstruidos con marco metálico, superficie quebrada para aumentar la capacidad de retención de polvo. Manta filtrante sintética de eficacia G-� o G-�.
�.- VENTILADORVentiladores centrífugos equilibrados estática y dinámicamente, seleccionados a bajo régimen de revoluciones. Conjunto motor - ventilador a transmisión, montado sobre antivibradores. Unión flexible en la boca de impulsión.
OPCIONES:– Absorvente acústico en cámara de ventilación y módulo de entrada.– Volumen de aire variable con ventiladores de motor incorporado “rotor externo” y regulador de velocidad.– Motores y transmisión independientes en los modelos que incorporan ventiladores dobles.
�.- BATERÍASBaterías de refrigeración y/o calefacción independientes para cada zona.Construidas a base de tubo de cobre y aletas de aluminio.Separador de gotas exclusivo, de acero inoxidable y bandeja para recogida de condensados. Deflectores para reparto uniforme del aire en toda la superficie de la batería.
5.- SALIDACompuertas de regulación con mando manual en cada una de las zonas, para ajuste del caudal de aire.
1.- INPUTModule that allows for the option of incorporating two dampers for air from outside and cycled.
2.- FILTERSMade with a metal frame, broken surface to increase dust retention capacity. Filtering synthetic blanket with G-3 or G-4 efficiency rating.
3.- FANStatically and dynamically balanced centrifugal fans, selected for low revolutions.Motor assembly - transmission fan, mounted on anti-vibration plates. Flexible union in the drive mouth.
OPTIONS:– Acoustic absorbent material in the fan chamber and input module.– Variable air volume with “external rotor” motor fans incorporated and speed regulator.– Independent motors and transmission in the models that incorporate double fans.
4.- COILSIndependent refrigeration and heating coils for each zone.Made from copper based tube and aluminium fins.Exclusive drop separator made of stainless steel and a tray for collecting condensation. Deflectors for a uniform distribution of air along the entire coil surface.
5.- OUTPUTDampers that can be regulated manually in each of the zones for adjusting the air flow.
1�
PRESTACIONES VENTILADORES / FANS PERFORMANCES
Caudal nominal (m�/h) Caudal por zona (m�/h)1 N° Ventiladores Pot. Motor (kW)�
Nominal flow (I/S) Flow per zona (I/S) Fans Nr Motor P (kW)
2.000 1.000 1 de doble turbina 555,5 277,8 double impeller
3.000 1.000 1 de doble turbina 833,3 277,8 double impeller
CTA-�,�-MV Contrucción standard / Standard construction ��� Kg • CTA-�,�-MV Contrucción standard / Standard construction �60 KgCTA-�,�-MV Contrucción acústica / Acoustic construction ��6 Kg • CTA-�,�-MV Contrucción acústica / Acoustic construction �15 Kg
PRESTACIONES BATERIAS / COILS PERFORMANCES
Batería de Frío / Cold coil TIPO � / TYPE 4 TIPO 5 / TYPE 5 TIPO 6 / TYPE 6CAUDAL DE AIRE T.E. AIRE Pot./Cap. kW Pot./Cap. kW Pot./Cap. kWAIR FLOW I.A.T. m�/h. l/s. °C / %HR Sensible Total Sensible Total Sensible Total
1000 277,8 25/55% 3,8 5,4 4,4 6,5 4,9 7,9
1000 277,8 27/60% 4,2 7,1 4,9 8,5 5,3 9,6
1000 277,8 32/68% 4,9 12,2 5,9 14,8 6,3 15,7
TEMPERATURA DE AGUAWATER TEMPERATURE 7/12°C∆ P lado de agua (m.c.a.) / ∆ P water 0,9 1,1 1,5
TIPO 1 TIPO � TIPO � TIPO � TIPO 1 TIPO � TIPO � TIPO �Batería de Calor / Hot coil TYPE 1 TYPE 2 TYPE 3 TYPE 4 TYPE 1 TYPE 2 TYPE 3 TYPE 4CAUDAL DE AIRE AIREAIR FLOW AIR Pot. / Cap. Pot. / Cap. Pot. / Cap. Pot. / Cap. Pot. / Cap. Pot. / Cap. Pot. / Cap. Pot. / Cap.
m�/h. l/s. Te °C/ kW kW kW kW kW kW kW kW
1.000 277,8 0,0 3,5 6,9 8,7 10,8 6,6 11,2 15,0 17,8
1.000 277,8 10,0 2,8 4,9 6,9 8,1 5,2 9,4 12,9 15,3
1.000 277,8 20,0 1,7 3,5 4,5 5,6 4,2 8,0 10,4 12,5
TEMPERATURA DE AGUAWATER TEMPERATURE 45/40°C 75/60°C∆ P lado de agua (m.c.a.) / ∆ P water 1,1 1,9 1,5 2,1 1,2 1,4 2,1 1,8
* – Dimensiones boca de impulsión cuando se suministra con compuerta de regulación: �00 x �00 ** – Dimensiones con una única batería para agua fría y caliente: 1.000* – Air outlet dimensions when the unit is delivered with regulation damper: 300 x 300 ** – Dimensions with only one coil for cold and hot water: 1.000
1.- Es factible la construcción de Climatizadores con distintos caudales de aire por zona.�.- Potencias de motor calculadas con batería de refrigeración tipo �, batería de calefacción tipo � y p.e.d. de 150 Pa1.- It’s available the construction of the air conditioner with diferent air flow per zone.2.- Motor Capacity calculate with cold coil type 4, hot coil type 2 and s.e.p 150 Pa
0,551.450 rp.m /380V/1,7A
0,751450 rpm /380V/2,3A
CTA-�,�-MV
CTA-�,�-MV
CTA
-2.2
MV
CTA
3.3
MV
DIM
EN
SIO
NE
S
DIM
EN
SIO
NS
EspecificacionesSpecifications
100 300* 230 300* 200
200
1050
1130
100 250* 240 250* 240 250* 200
1450
1530
100 300* 180
1200
**
250
4090
2330
550
630
100
650
100 250* 240 250* 240 250* 200
1450
1530
100 300* 180
1200
**
250
4090
2330
550
630
100
650
1�
PRESTACIONES VENTILADORES / FANS PERFORMANCES
Caudal nominal (m�/h) Caudal por zona (m�/h)1 N° Ventiladores Pot. Motor (kW)�
Nominal flow (I/S) Flow per zona (I/S) Fans Nr Motor P (kW)
3.000 1.500 833,3 416,7
4.500 1.500 1.250 416,7
CTA-�,�-MV Contrucción standard / Standard construction �5� Kg • CTA-�,5.�-MV Contrucción standard / Standard construction �75 KgCTA-�,�-MV Contrucción acústica / Acoustic construction �09 Kg • CTA-�,5.�-MV Contrucción acústica / Acoustic construction ��� Kg
PRESTACIONES BATERIAS / COILS PERFORMANCES
Batería de Frío / Cold coil TIPO � / TYPE 4 TIPO 5 / TYPE 5 TIPO 6 / TYPE 6CAUDAL DE AIRE T.E. AIRE Pot./Cap. kW Pot./Cap. kW Pot./Cap. kWAIR FLOW I.A.T.
m�/h. l/s. °C / %HR Sensible Total Sensible Total Sensible Total
1.500 416,7 25/55% 5,8 8,1 6,4 9,8 7,4 11,9
1.500 416,7 27/60% 6,3 10,7 7,3 12,8 8,0 14,4
1.500 416,7 32/68% 7,3 18,2 8,8 22,2 9,4 23,4
TEMPERATURA DE AGUAWATER TEMPERATURE 7/12°C∆ P lado de agua (m.c.a.) / ∆ P water 1,1 1,2 1,6
TIPO 1 TIPO � TIPO � TIPO � TIPO 1 TIPO � TIPO � TIPO �Batería de Calor / Hot coil TYPE 1 TYPE 2 TYPE 3 TYPE 4 TYPE 1 TYPE 2 TYPE 3 TYPE 4CAUDAL DE AIRE AIREAIR FLOW AIR Pot. / Cap. Pot. / Cap. Pot. / Cap. Pot. / Cap. Pot. / Cap. Pot. / Cap. Pot. / Cap. Pot. / Cap.
m�/h. l/s. Te °C/ kW kW kW kW kW kW kW kW
1.500 416,7 0,0 5,2 10,4 13,1 16,2 99 16,8 22,5 26,7
1.500 416,7 10,0 4,2 73 10,4 12,1 7,8 14,1 194 23,0
1.500 416,7 20,0 2 6 5 2 6,8 8,4 6,3 12,0 15,6 18,8
TEMPERATURA DE AGUAWATER TEMPERATURE 45/40°C 75/60°C∆ P lado de agua (m.c.a.) / ∆ P water 1,1 1,7 1,5 1,9 1,3 1,5 2,1 1,9
* – Dimensiones boca de impulsión cuando se suministra con compuerta de regulación: �00 x �00 ** – Dimensiones con una única batería para agua fría y caliente: 1.000* – Air outlet dimensions when the unit is delivered with regulation damper: 400 x 300 ** – Dimensions with only one coil for cold and hot water: 1.000
1.- Es factible la construcción de Climatizadores con distintos caudales de aire por zona.�.- Potencias de motor calculadas con batería de refrigeración tipo �, batería de calefacción tipo � y p.e.d. de 150 Pa1.- It’s available the construction of the air conditioner with diferent air flow per zone.2.- Motor Capacity calculate with cold coil type 4, hot coil type 2 and s.e.p 150 Pa
0,751.450 rp.m /380V/2,3A
1,11450 rpm /380V/2,8A
CTA-�,�-MV
CTA-�,5.�-MV
1
1
DIM
ENSI
ON
ES
D
IMEN
SIO
NS
CTA
-3.2
MV
CTA
4,5
.3 M
V 100 350* 240 350* 240 350* 200
1750
1830
100 350* 180
1200
**
250
4090
2380
600
680
100
700
100 350* 240 350* 240 350* 200
1750
1830
100 350* 180
1200
**
250
4090
2380
600
680
100
700
100 350* 230 350* 200
200
1050
1230
15
PRESTACIONES VENTILADORES / FANS PERFORMANCES
Caudal nominal (m�/h) Caudal por zona (m�/h)1 N° Ventiladores Pot. Motor (kW)�
Nominal flow (I/S) Flow per zona (I/S) Fans Nr Motor P (kW)
4.000 2.000 1 de doble turbina 1.111,1 555,6 double impeller
6.000 2.000 1 de doble turbina 1.666,7 555,6 double impeller
CTA-�.�-MV Contrucción standard / Standard construction �01 Kg • CTA-6.�-MV Contrucción standard / Standard construction �6� KgCTA-�.�-MV Contrucción acústica / Acoustic construction �05 Kg • CTA-6.�-MV Contrucción acústica / Acoustic construction ��� Kg
PRESTACIONES BATERIAS / COILS PERFORMANCES
Batería de Frío / Cold coil TIPO � / TYPE 4 TIPO 5 / TYPE 5 TIPO 6 / TYPE 6CAUDAL DE AIRE T.E. AIRE Pot./Cap. kW Pot./Cap. kW Pot./Cap. kWAIR FLOW I.A.T.
m�/h. l/s. °C / %HR Sensible Total Sensible Total Sensible Total
2.000 555,6 25/55% 7,7 10,8 8,6 13,1 9,8 15,8
2.000 555,6 27/60% 8,4 14,2 9,8 17,0 10,6 19,2
2.000 555,6 32/68% 9,7 24,3 11,8 29,6 12,5 31,2
TEMPERATURA DE AGUAWATER TEMPERATURE 7/12°C∆ P lado de agua (m.c.a.) / ∆ P water 0,8 1,2 1,7
TIPO 1 TIPO � TIPO � TIPO � TIPO 1 TIPO � TIPO � TIPO �Batería de Calor / Hot coil TYPE 1 TYPE 2 TYPE 3 TYPE 4 TYPE 1 TYPE 2 TYPE 3 TYPE 4CAUDAL DE AIRE AIREAIR FLOW AIR Pot. / Cap. Pot. / Cap. Pot. / Cap. Pot. / Cap. Pot. / Cap. Pot. / Cap. Pot. / Cap. Pot. / Cap.
m�/h. l/s. Te °C/ kW kW kW kW kW kW kW kW
2.000 555,6 0,0 6,9 13,9 17,4 21,6 13,2 22,4 30,0 35,6
2.000 555,6 10,0 5,6 9,7 13,9 16,1 10,4 188 25,8 30,3
2.000 555,6 20,0 3,5 6,9 9,1 11,2 8,4 16,0 20,8 25,0
TEMPERATURA DE AGUAWATER TEMPERATURE 45/40°C 75/60°C∆ P lado de agua (m.c.a.) / ∆ P water 1,1 1,8 1,6 2,2 1,3 1,5 1,9 2,1
* – Dimensiones boca de impulsión cuando se suministra con compuerta de regulación: 500 x �00 ** – Dimensiones con una única batería para agua fría y caliente: 1.000* – Air outlet dimensions when the unit is delivered with regulation damper: 500 x 300 ** – Dimensions with only one coil for cold and hot water: 1.000
1.- Es factible la construcción de Climatizadores con distintos caudales de aire por zona.�.- Potencias de motor calculadas con batería de refrigeración tipo �, batería de calefacción tipo � y p.e.d. de 150 Pa1.- It’s available the construction of the air conditioner with diferent air flow per zone.2.- Motor Capacity calculate with cold coil type 4, hot coil type 2 and s.e.p 150 Pa
1,51.450 rp.m /380V/2,8A
1,51450 rpm /380V/3,7A
CTA-�.�-MV
CTA-6.�-MV
CTA
-4.2
MV
CTA
6.3
MV
DIM
EN
SIO
NE
S
DIM
EN
SIO
NS
100 400* 240 400* 240 400* 200
1850
1930
100 450* 180
1200
**
250
4090
2380
650
730
100
700
100 450* 230 450* 200
200
1350
1430
100 400* 240 400* 240 400* 200
1850
1930
100 450* 180
1200
**
250
4090
2380
650
730
100
700
16
PRESTACIONES VENTILADORES / FANS PERFORMANCES
Caudal nominal (m�/h) Caudal por zona (m�/h)1 N° Ventiladores Pot. Motor (kW)�
Nominal flow (I/S) Flow per zona (I/S) Fans Nr Motor P (kW)
6.000 3.000 1 de doble turbina 1.666,7 833,3 double impeller
9.000 3.000 1 de doble turbina 2.500 833,3 double impeller
CTA-6.�-MV Contrucción standard / Standard construction �76 Kg • CTA-9.�-MV Contrucción standard / Standard construction ��9 KgCTA-6.�-MV Contrucción acústica / Acoustic construction 5�� Kg • CTA-9.�-MV Contrucción acústica / Acoustic construction 59� Kg
PRESTACIONES BATERIAS / COILS PERFORMANCES
Batería de Frío / Cold coil TIPO � / TYPE 4 TIPO 5 / TYPE 5 TIPO 6 / TYPE 6CAUDAL DE AIRE T.E. AIRE Pot./Cap. kW Pot./Cap. kW Pot./Cap. kWAIR FLOW I.A.T.
m�/h. l/s. °C / %HR Sensible Total Sensible Total Sensible Total
3.000 833,3 25/55% 11,5 16,2 13,1 19,7 14,7 23,8
3.000 833,3 27/60% 12,6 21,3 14,7 25,5 15,9 28,8
3.000 833,3 32/68% 14,6 36,4 17,7 44,4 18,8 46,9
TEMPERATURA DE AGUAWATER TEMPERATURE 7/12°C∆ P lado de agua (m.c.a.) / ∆ P water 1,1 1,3 1,7
TIPO 1 TIPO � TIPO � TIPO � TIPO 1 TIPO � TIPO � TIPO �Batería de Calor / Hot coil TYPE 1 TYPE 2 TYPE 3 TYPE 4 TYPE 1 TYPE 2 TYPE 3 TYPE 4CAUDAL DE AIRE AIREAIR FLOW AIR Pot. / Cap. Pot. / Cap. Pot. / Cap. Pot. / Cap. Pot. / Cap. Pot. / Cap. Pot. / Cap. Pot. / Cap.
m�/h. l/s. Te °C/ kW kW kW kW kW kW kW kW
3.000 833,3 0,0 10,4 20,9 26,1 32,4 19,8 33,6 45,0 53,4
3.000 833,3 10,0 5,6 14,6 20,9 24,2 15,6 28,2 38,7 45,9
3.000 833,3 20,0 3,5 10,4 13,6 16,7 12,6 24,0 31,2 37,5
TEMPERATURA DE AGUAWATER TEMPERATURE 45/40°C 75/60°C∆ P lado de agua (m.c.a.) / ∆ P water 1,3 1,9 1,6 2,2 1,3 1,5 1,9 1,8
* – Dimensiones boca de impulsión cuando se suministra con compuerta de regulación: 600 x �00 ** – Dimensiones con una única batería para agua fría y caliente: 1.000* – Air outlet dimensions when the unit is delivered with regulation damper: 600 x 300 ** – Dimensions with only one coil for cold and hot water: 1.000
1.- Es factible la construcción de Climatizadores con distintos caudales de aire por zona.�.- Potencias de motor calculadas con batería de refrigeración tipo �, batería de calefacción tipo � y p.e.d. de 150 Pa1.- It’s available the construction of the air conditioner with diferent air flow per zone.2.- Motor Capacity calculate with cold coil type 4, hot coil type 2 and s.e.p 150 Pa
1,51.450 rp.m /380V/3,7A
2,21450 rpm /380V/5,5A
CTA-6.�-MV
CTA-9.�-MV
DIM
ENSI
ON
ES
D
IMEN
SIO
NS
CTA
-6.2
MV
CTA
9.3
MV 100 600* 240 600* 240 600* 200
2500
2540
100 450* 180
1200
**
250
4090
2380
700
780
100
700
100 600* 230 600* 200
250
1650
1730
100 600* 240 600* 240 600* 200
2500
2540
100 450* 180
1200
**
250
4090
2380
700
780
100
700
17
PRESTACIONES VENTILADORES / FANS PERFORMANCES
Caudal nominal (m�/h) Caudal por zona (m�/h)1 N° Ventiladores Pot. Motor (kW)�
Nominal flow (I/S) Flow per zona (I/S) Fans Nr Motor P (kW)
8.000 4.000 1 de doble turbina 2.222,2 1.111,1 double impeller
12.000 4.000 1 de doble turbina 3.333,3 1.111,1 double impeller
CTA-�.�-MV Contrucción standard / Standard construction ��7 Kg • CTA-1�.�-MV Contrucción standard / Standard construction 516 KgCTA-�.�-MV Contrucción acústica / Acoustic construction 607 Kg • CTA-1�.�-MV Contrucción acústica / Acoustic construction 690 Kg
PRESTACIONES BATERIAS / COILS PERFORMANCES
Batería de Frío / Cold coil TIPO � / TYPE 4 TIPO 5 / TYPE 5 TIPO 6 / TYPE 6CAUDAL DE AIRE T.E. AIRE Pot./Cap. kW Pot./Cap. kW Pot./Cap. kWAIR FLOW I.A.T.
m�/h. l/s. °C / %HR Sensible Total Sensible Total Sensible Total
4.000 1.111,1 25/55% 15,4 21,7 17,3 26,2 19,7 31,8
4.000 1.111,1 27/60% 16,8 28,4 19,6 34,0 21,2 38,4
4.000 1.111,1 32/68% 19,4 48,5 23,6 59,1 25,1 62,5
TEMPERATURA DE AGUAWATER TEMPERATURE 7/12°C∆ P lado de agua (m.c.a.) / ∆ P water 1,1 1,5 1,9
TIPO 1 TIPO � TIPO � TIPO � TIPO 1 TIPO � TIPO � TIPO �Batería de Calor / Hot coil TYPE 1 TYPE 2 TYPE 3 TYPE 4 TYPE 1 TYPE 2 TYPE 3 TYPE 4CAUDAL DE AIRE AIREAIR FLOW AIR Pot. / Cap. Pot. / Cap. Pot. / Cap. Pot. / Cap. Pot. / Cap. Pot. / Cap. Pot. / Cap. Pot. / Cap.
m�/h. l/s. Te °C/ kW kW kW kW kW kW kW kW
4.000 1.111,1 0,0 13,9 27,9 34,8 43,2 26,4 44,8 60,0 71,2
4.000 1.111,1 10,0 11,1 19,5 27,9 32,1 20,8 37,6 51,6 61,2
4.000 1.111,1 20,0 6,9 13,9 18,0 22,3 16,8 32,0 41,6 50,0
TEMPERATURA DE AGUAWATER TEMPERATURE 45/40°C 75/60°C∆ P lado de agua (m.c.a.) / ∆ P water 1,3 2,1 1,7 1,9 1,3 1,6 2,3 1,9
* – Dimensiones boca de impulsión cuando se suministra con compuerta de regulación: 700 x �00 ** – Dimensiones con una única batería para agua fría y caliente: 1.000* – Air outlet dimensions when the unit is delivered with regulation damper: 700 x 300 ** – Dimensions with only one coil for cold and hot water: 1.000
1.- Es factible la construcción de Climatizadores con distintos caudales de aire por zona.�.- Potencias de motor calculadas con batería de refrigeración tipo �, batería de calefacción tipo � y p.e.d. de 150 Pa1.- It’s available the construction of the air conditioner with diferent air flow per zone.2.- Motor Capacity calculate with cold coil type 4, hot coil type 2 and s.e.p 150 Pa
2,21.450 rp.m /380V/5,5A
31450 rpm /380V/7,5A
CTA-�.�-MV
CTA-1�.�-MV
CTA
-8.2
MV
CTA
12.
3 M
V
DIM
EN
SIO
NE
S
DIM
EN
SIO
NS
100 700* 240 700* 240 700* 200
2800
2880
100 550* 180
1250
**
250
4090
2430
750
830
100
700
100 700* 230 700* 200
250
1830
1930
100 700* 240 700* 240 700* 200
2800
2880
100 550* 180
1250
**
250
4090
2430
750
830
100
700
1�
Serie CTA MV (Multizona)
Unidades verticalesBaterias de frío y/o calor para cada zona.Control independiente de la temperatura
Vertical construction units.Available in 2 or 4 pipes for each zone.Independent control of the temperature.
Serie CTA VR
Unidades verticales de profundidad reducidaCaudales de 2500 a 10000 m3/h
Vertical units with reduced profile.Air flows between 2500 and 10000 m3/h
19
Otros productos que fabricamosMore products that we manufacture
Serie Ultra
Unidades higienicasEnsayo según norma EN 1886
Hygienical unitsSound test according to UNE EN 1886
Serie CHI
Caudales de 1000 a 4000 m3/hEnsayo según norma EN 1886Bajo nivel sonoro
Air flow between 1000 and 4000 m3/hSound test according to UNE EN 1886Low noise level
Cajas de ventilación TC/MI
Amplia gama de caudalesConstrucción Standard o con panel acústicoVentilador centrífugo con motor incorporado o tradicional
Wide air flow rangesStandard or acoustic panel housingCentrifugal fan direct drived or belt drived
�0
Gaudí, 2608120 La Llagosta (Barcelona)Tel. 93 544 38 30 Fax 93 544 38 31
[email protected] orientativas SERVO/CLIMA se reserva el derecho de modificar sin
previo aviso las características y medidas de estos modelos
Ver
tica
les
05 F
ebre
ro 2
00
8