Beamex MCS200 Mesa de Calibracion
-
Upload
jahir-ballesteros-l -
Category
Documents
-
view
14 -
download
0
Transcript of Beamex MCS200 Mesa de Calibracion
-
5/27/2018 Beamex MCS200 Mesa de Calibracion
1/7
MCS200 for automated calibration
www.beamex.com BeamexMCS200 for automated calibration
BeamexMCS200 Workstation
Automated Pressure and Temperature Calibration
Calibration of process instruments is animportant activity in the industry. It can be verytime consuming, depending on the equipment andwork processes used.
BeamexMCS200 enables fully automatedpressure and temperature calibration, along withother electrical maintenance. With software, itoffers a completely paperless calibration solution.
Following instruments can be calibrated with MCS200: Pressure transmitters, sensors, gauges, switches,
recorders
Differential pressure transmitters I/P converters Temperature transmitters, sensors, indicators,
switches, recorders
Thermocouples and RTDs HART instruments FOUNDATION Fieldbus instruments Profibus PA instruments Electrical limit switches Frequency meters, Tachometers, Pulse meters MCS200 also enables Testing and maintenance of electrical and electronic
devices.
Soldering and desoldering of electronic components
Calibration and test equipment included in MCS200: Host calibrator with user interface, electrical measurement
and 24V loop supply
Pressure measurement modules from vacuum to 1000 bar Automatic pressure controller, communicating with thehost calibrator Electrical and temperature module for TC measurements,
with reference junction
Temperature dry block, communicating with the hostcalibrator
Variable AC supply Variable DC supply Soldering and desoldering equipment Calibration software
Offers paperless calibration management from initialrecording of calibration data through to historical trendanalysis.
-
5/27/2018 Beamex MCS200 Mesa de Calibracion
2/7
MCS200 for electrical testing and maintenance
www.beamex.com BeamexMCS200 for electrical testing and maintenance
BeamexMCS200 Workstation
Electrical Testing and Maintenance
Electrical and electronic testing and maintenancecan be carried out effectively and ergonomicallyusing a dedicated test bench fitted with well plannedset of equipment and accessories.
ESD protected BeamexMCS200 offers a versatile testand maintenance facility with variable AC and DC powersupplies, measuring instruments and soldering/desolderingequipment.
Features:
Testing and maintenance of electrical and electronicdevices and components
Ergonomic and ESD protected workstation withsemiconducting table top, ESD wrist strap andgrounding sets
ESD chair Magnifier light ESD compatible storage accessories
Test and measurement equipment in MCS200:
Programmable dual DC supply Programmable AC supply Constant DC supplies Isolated supply outlet Digital multimeter Digital oscilloscope Function generator/frequency counter ESD safe lead-free soldering and desoldering station
-
5/27/2018 Beamex MCS200 Mesa de Calibracion
3/7
MCS200 for electronic measurements and testing
www.beamex.com BeamexMCS200 for electronic measurements and testing
BeamexMCS200 Workstation
Electronic Measurements and Testing
Testing and diagnosis of electronic componentsand devices can be carried out effectively andergonomically using a test bench fitted withappropriate measurement equipment.
BeamexMCS200 offers an ESD safe measurementfacility for testing and troubleshooting electronic devicesand loose circuit boards and checking of newly designedcircuitry and newly programmed electronics.
Features:
Testing and diagnosis of electronic components anddevices
Ergonomic and ESD protected workstation withsemiconducting table top, ESD wrist straps andgrounding sets
ESD chair Magnifier light ESD compatible storage accessories
Test and measurement equipment in MCS200:
Precision digital multimeter Digital phosphor oscilloscope Function generator/frequency counter LCR meter Constant DC supplies Programmable DC supply Isolated supply outlet Hand held IC testers for digital and analog devices
-
5/27/2018 Beamex MCS200 Mesa de Calibracion
4/7
MCS200 for motor and electrical testing
www.beamex.com BeamexMCS200 for motor and electrical testing
BeamexMCS200 Workstation
Motor and Electrical Testing
Functional tests are necessary after repair,maintenance or longer storage of electricalequipment, such as electrical motors, tools,extension cables, heaters and coolers.
BeamexMCS200 enables practical testing ofelectrical motors and other devices. Motors withoperating range 380-480 VAC can be tested withMCS200 up to 100 kW.
Following tests can be carried out with MCS200:
Electrical safety measurements and tests:
Ground resistance Insulation resistance High voltage tests Other measurable quantitiesMeasurements with 3 parameters on displaysimultaneously:
Voltage Current Speed Power Run time Output frequency kWh counterTest run of motors in different speeds
Measurements during motor test run:
Temperature Rotational speed Overall vibration Bearing conditionSoftware for entering motor parameters is included.
Test equipment included in MCS200: Control / measurement unit, output current max. 63A Combined safety and functional tester 3-phase voltage supply 0-400VAC 16A DC connection 0-500V 10A 3-phase power analyzer TRMS multimeter Tachometer Vibration meter
-
5/27/2018 Beamex MCS200 Mesa de Calibracion
5/7
MCS200 for pressure and temperature calibration
www.beamex.com BeamexMCS200 for pressure and temperature calibration
BeamexMCS200 Workstation
Pressure and Temperature Calibration
Calibration of process instruments is animportant activity in the industry. It can be verytime consuming, depending on the equipment andwork processes used.
BeamexMCS200 enables efficient and highlyaccurate pressure, temperature and electricalcalibration. With software, it offers a completelypaperless calibration solution.
Following instruments can be calibrated with MCS200: Pressure transmitters, sensors, gauges, switches,
recorders
Differential pressure transmitters I/P converters Temperature transmitters, sensors, indicators,
switches, recorders
Thermocouples and RTDs HART instruments FOUNDATION Fieldbus instruments Profibus PA instruments Electrical limit switches Frequency meters, Tachometers, Pulse meters MCS200 also enables Testing and maintenance of electrical and electronic
devices. Soldering of electronic components
Calibration and test equipment included in MCS200: Host calibrator with user interface, electrical measurement
and 24V loop supply
Pressure measurement modules from vacuum to 1000 bar Regulation of low and high pressures as well as vacuum Electrical and temperature module for TC measurements,
with reference junction
Digital multimeter Variable AC and DC supplies Soldering station Calibration software
Offers paperless calibration management from initialrecording of calibration data to historical trend analysis.
Instrument data with calibration procedures aredownloaded to the host calibrator and results are
uploaded back to the PC, making the whole calibrationprocess fast and error free.
-
5/27/2018 Beamex MCS200 Mesa de Calibracion
6/7
MCS200 for soldering and desoldering
www.beamex.com BeamexMCS200 for soldering and desoldering
BeamexMCS200 Workstation
Soldering and Desoldering
Maintenance, testing and repair of devices andcomponents can be carried out effectively andergonomically using a dedicated test bench fittedwith proper equipment and accessories.
ESD protected BeamexMCS200 enables solderingand desoldering of surface-mounted and traditionalcomponents as well as testing and maintenance ofelectrical and electronic devices.
Soldering and test equipment included in MCS200:
ESD safe lead-free soldering and desoldering station Infrared soldering / rework station Isolated supply outlet Digital multimeter Programmable variable AC supply Programmable variable DC supply Constant DC supplies LCR meter Digital oscilloscope Pressure connection for tools Digital IC tester Analog IC tester
Soldering accessories:
Fume extraction system Video microscope with LCD display Magnifier light Soldering tips Desoldering tips SMD tweezer Hot air pencil Liquid dispenser
-
5/27/2018 Beamex MCS200 Mesa de Calibracion
7/7
MCS200 for temperature calibration
www.beamex.com BeamexMCS200 for temperature calibration
BeamexMCS200 Workstation
Temperature Calibration
Calibration of temperature and electricalinstruments is an important activity in the industry.It can be very time consuming, depending on theequipment and work processes used.
BeamexMCS200 enables efficient and highlyaccurate calibration of TCs, RTDs, electricalsignals and frequency. With Beamex dry block, itallows fully automated temperature calibration.
Following instruments can be calibrated with MCS200:
Temperature transmitters, sensors, indicators,switches, recorders Thermocouples and RTDs HART instruments FOUNDATION Fieldbus instruments Profibus PA instruments Electrical limit switches Frequency meters Tachometers Pulse meters Fully automated temperature calibration can be carriedout with the assistance of Beamex temperature blockcontrolled by the calibration host module.
Calibration and test equipment included in MCS200:
Host calibrator with user interface, electrical measurementand 24V loop supply Electrical and temperature module for TC measurements,
with reference junction
Pt100 simulator Decade box Precision digital multimeter LCR meter Function generator/frequency counter Variable AC and DC supplies Calibration software offers paperless calibrationmanagement from initial recording of calibration data tohistorical trend analysis.